QSC E218SW User Manual
E218sw
Dual 18-inch Passive
Subwoofer
KEY FEATURES
• High output, professional quality sound with
1600 W continuous power
• E Series Entertainment System – Advanced
digital signal processing tunings and
options using QSC GXD, PLD amplifiers or
™
TouchMix
• Rugged tour-grade textured paint
• Foam-lined perforated steel grill
• Optional padded transport cover for
protection during transit (E218sw CVR)
• Optional Caster Kit for greater portability
(CASTER KIT-L)
digital mixers.
E218sw
Entertainment Venues ∙ Houses of Worship ∙ Rental/Production
Mobile Performers
The E218sw is a high-performance passive subwoofer with two, 800 W, 18-inch aluminum
frame woofers. It’s designed to produce crushing low-end for live performance bands and
high-energy dance music. For portable applications it includes attachment points for four
optional casters. The subwoofer’s 4-ohm impedance means that a single unit can be optimally powered by an affordable power amplifier.
E Series Loudspeakers
The E Series is a range of passive loudspeakers offering robust construction, trusted
reliability and overall sonic performance beyond expectations. Intended for sound
reinforcement in entertainment applications including live performance, DJ and dance
music, karaoke and event production, E Series loudspeakers will deliver outstanding results.
Building on the proven, QSC “Systems” methodology, the E Series loudspeakers’
performance is further enhanced when paired with QSC GXD or PLD amplifiers or with a
QSC TouchMix
presets. These presets support a variety of applications including live sound reinforcement,
stage monitoring, dance music and karaoke.
E Series consists of six models constructed of rugged plywood and coated in black,
textured paint. Heavy-duty grilles lined with foam provide protection for the woofers and an
elegant appearance. E10, E12 and E15 models are equipped with an all metal, dual-angle,
35 mm socket that allows the speaker to be mounted vertically on a pole or angled down
by 10° to improve audience coverage and reduce rear wall reflections. Multiple mounting
options using E Series Yoke or M8 eyebolts are supported. Input connections include dual
NL4 as well as screw terminal receptacles. Additionally, E215 and E218SW models feature
ergonomic, aluminum handles to ease portability.
™
digital mixer, and taking advantage of the on-board DSP and factory-tuned
E218sw with optional caster kit E218sw with optional transport cover
E218sw Specifications
LF
LF
NL4
Barrier
Strip
NL4
1
1
1
1
2
2
2
2
24.3 in
25.2 in
Width
616 mm
24.3 in
1180 mm
Depth
640 mm
25.2 in
E218sw
Configuration 2 x 18-inch subwoofer non-powered
Frequency Range1 (-10 dB) 32 Hz – 230 kHz
2
Power Capacity
Sensitivity 101 dB, 1 W @ 1 m
Coverage Angle N/A
Output1 (Peak SPL @ 1m) 136 dB
Drivers
LF 2 x 457 mm (18-inch) driver with 102 mm (4-inch) voice coil
HF N/A
Nominal Impedance 4 Ω
Cross-over N/A
Input Connectors 2 x NL4 1 x barrier strip
Enclosure 11-ply, black texture paint finish. Perforated, powder-coated steel grille with foam lining
Net Weight 168 lb / 76.4 kg
Dimensions (WxHxD) 46.8 x 24.3 x 25.2 in (1180 mm x 616 mm x 640 mm)
1 With QSC Processing.
2 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet
with crossover, full range 30 Hz 12 dB/octave.
Additional specifications to be announced.
Specifications subject to change without notice.
: Continuous/Peak 1600 W / 6400 W
NL4
NL4
Barrier
Strip
E218sw Details
E218sw Dimensions
Width
616 mm
24.3 in
Depth
640 mm
25.2 in
1
1
2
2
1
1
LF
Height
1180 mm
46.5 in
Height
46.5 in
2
2
LF
Depth
640 mm
Width
616 mm
+1·800·854·4079 | +1·714·754·6175 | WWW.QSC.COM
©2017 QSC, LLC all rights reserved. QSC, the QSC logo and TouchMix are registered trademarks of QSC, LLC in the U.S. Patent and Trademark. E Series Spec Sheet 11/2017
Loading...