QSC DPX-4 Owners manual

1675 MacArthur Boulevard
Costa Mesa, CA 92626
Ph: 800/854-4079 or 714/957-7100
Fax: [phone]

www.qscaudio.com
email: [e-mail]

REMOTE RACK MOUNTING BRACKET

FEATURES

•

Allows remote rack mounting of up to four two-channel
accessory modules

•

Up to eight channels of processing in 3 rack spaces

•

Adjustable rack ears for variable mounting depth

•

Additional holes for securing cabling with wire ties

COMPATIBLE ACCESSORY MODELS

DSP-3, DSP-4 and future DataPort accessory modules.

BASIC DESCRIPTION

The DPX-4 allows remote rack mounting of QSC DataPort-compatible
accessory modules such as the DSP-3 and DSP-4 digital signal
processors. The bracket allows accessory modules to be used in a
standalone configuration with QSC four-channel, PowerLight, or non­DataPort amplifiers, including non-QSC amplifiers. As many as four
modules can be mounted to the bracket.

The bracket fits a standard 19" equipment rack and occupies 3 rack
spaces. The top flange has sets of holes for securing your cabling with
wire ties.The bracket may be mounted on either the front or rear rails of
an equipment rack. The rack ears are adjustable, so its mounting
depth can range from approximately 1.75 in (45 mm) to 4.72 in (120 mm).

The module’s DataPort connector is accessible through the
rectangular opening in the bracket. Connectors, switches, LEDs, and
other features located on the “outward” side of an accessory module
are accessible even when the accessory is mounted to the bracket.

The interconnections an accessory module requires depend on the
type of module and the type of amplifier it is used with. Accessories
such as the DSP-3 and DSP-4 have their own audio signal inputs.

DPX-4 Spec Sheet 092002