QNAP TS-2477XU-RP-2600-8G User Manual

Hardware Specification

TS-2477XU-RP-2600-8G

CPU AMD Ryzen™ 5 2600 6-core 3.4 GHz processor, Turbo Core 3.9 GHz

CPU Architecture 64-bit x86

Floating Point Unit Yes

Encryption Engine Yes (AES-NI)

System Memory 8 GB UDIMM DDR4 (2 x 4GB)

Maximum Memory 64 GB (4 x 16 GB)

Memory Slot 4 x DDR4 long DIMM

Flash Memory 5GB (Dual boot OS protection)

Drive Bay 24 x 3.5-inch

Drive Compatibility 3.5-inch SATA hard disk drives

2.5-inch SATA hard disk drives

2.5-inch SATA solid state drives

Hot-swappable Yes

SSD Cache Acceleration Support Yes

Gigabit Ethernet Port (RJ45) 2

10 Gigabit Ethernet Port 2 x 10GbE SFP+ SmartNIC port

Jumbo Frame Yes

PCIe Slot 4

Slot 1: Gen3 x4
Slot 2: Gen3 x8 or Gen3 x4*
Slot 3: Gen3 x8 or Gen3 x4**
Slot 4: Gen3 x4

USB 3.0 port 4

USB 3.1 Gen 2 (10Gbps) Port 1 x Type-C USB 3.1 Gen2 5V/3A 10Gbps

1 x Type-A USB 3.1 Gen2 5V/1A 10Gbps

Form Factor 4U Rackmount

LED Indicators HDD 1-24, Status, LAN, storage expansion port status

Buttons Power, Reset

Dimensions (HxWxD) 176.15, 481.04, 672.02

Weight (Net) 22.66

Operating temperature 0 - 40 °C (32°F - 104°F)

Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)

Power Supply Unit 800W(x2), 100-240V

Power Consumption: Operating
Mode, Typical

143.97

Fan System: 4 x 9.2cm fan (12V DC)

Sound Level 27.5

System Warning Buzzer

Kensington Security Slot Yes

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors,
or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front
of operating NAS.
Designs and specifications are subject to change without notice.