QNAP TS-230 User Manual

Hardware Specification

TS-230

CPU Realtek RTD1296 quad-core 1.4GHz processor

CPU Architecture 64-bit ARM

Floating Point Unit Yes

Encryption Engine Yes

Hardware-accelerated
Transcoding

Yes

System Memory 2 GB DDR4, not expandable

Maximum Memory 2 GB DDR4, not expandable

Flash Memory 4 GB (Dual boot OS protection)

Drive Bay 2 x 3.5-inch SATA 6Gb/s, 3Gb/s

Drive Compatibility 3.5-inch SATA hard disk drives

2.5-inch SATA hard disk drives

2.5-inch SATA solid state drives

Hot-swappable Yes

Gigabit Ethernet Port
(RJ45)

1

Jumbo Frame Yes

USB 2.0 port 1

USB 3.0 port 2

Form Factor Tower

LED Indicators System Status, LAN, USB, HDD1~2

Buttons Power, Reset, USB Copy

Dimensions (HxWxD) 188.64 × 90.18 × 156.26 mm

Weight (Net) 1.11 kg

Weight (Gross) 1.99 kg

Operating temperature 0 - 40 °C (32°F - 104°F)

Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)

Power Supply Unit External, 65 W, AC 100 to 240 V

Power Consumption: HDD
Sleep Mode

4.48 W

Power Consumption:
Operating Mode, Typical

12.277 W

Fan 1 x 80mm, 12VDC

Sound Level 15 db(A)

System Warning Buzzer

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors,
or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front
of operating NAS.
Designs and specifications are subject to change without notice.