QNAP TS-1886XU-RP-D1602-4G User Manual

Hardware Specification
TS-1886XU-RP-D1602-4G
CPU Intel® Xeon® D-1602 dual-core 2.50 GHz processor (burst up to 3.2 GHz)
CPU Architecture 64-bit x86
System Memory 4 GB UDIMM DDR4 ECC (1 x 4GB)
Maximum Memory 128 GB (4 x 32 GB)
Memory Slot 4 x Long-DIMM DDR4
Drive Bay Front: 12 x 3.5-inch SATA 6Gb/s, 3Gb/s
Rear: 6 x 2.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility 3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
2.5-inch bays:
2.5-inch SATA solid state drives
Hot-swappable Yes
SSD Cache Acceleration Support
Yes
Gigabit Ethernet Port (RJ45)
4
10 Gigabit Ethernet Port 2 x 10GbE SFP+ SmartNIC port
PCIe Slot 4
Slot 1: PCIe Gen 3 x4 Slot 2: PCIe Gen 3 x8 or x4 Slot 3: PCIe Gen 3 x4 Slot 4: PCIe Gen 3 x8 or x4
USB 3.2 Gen 1 port 2
Form Factor Rackmount
LED Indicators HDD, SSD, Status, LAN, storage expansion port status
Buttons Power, Reset
Dimensions (HxWxD) 88.3 × 482 × 549.7 mm
Weight (Net) 12.73 kg
Weight (Gross) 18.69 kg
Operating temperature 0 - 40 °C (32°F - 104°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 550W(x2), 100-240V
Power Consumption: Operating Mode, Typical
117.92 W
Fan System fan: 3 x 60mm, 12VDC
Sound Level 56.9 db(A)
System Warning Buzzer
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting. * Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS. Designs and specifications are subject to change without notice.
Loading...