QNAP TS-1683XU-RP-E2124-16G User Manual

Hardware Specification

TS-1683XU-RP-E2124-16G

CPU Intel® Xeon® E-2124 4-core 3.3 GHz processor (burst up to 4.3 GHz)

Architecture: 64-bit

Encryption Acceleration Yes ，AES-NI

System Memory 16 GB DDR4 ECC RAM (2 x 8GB)

Maximum Memory 64 GB ( 4 x 16 GB)

Memory Slot 4 x Long-DIMM DDR4

(For dual- or quad-DIMM configurations, you must use a pair of identical
DDR4 modules.)

Flash Memory 4 GB (Dual boot OS protection)

Drive Bay Hot-swappable 16 x 3.5-inch SATA 6 Gbps bays

Drive Compatibility 3.5-inch bays:

3.5-inch SATA hard disk drives

2.5-inch SATA hard disk drives

2.5-inch SATA solid state drives

10 Gigabit Ethernet Port 2 x 10GbE SFP+ SmartNIC ports

Gigabit Ethernet Port 4 x RJ45

PCIe Slot 4

Slot 1: PCIe Gen2 x4 (PCH)
Slot 2: PCIe Gen3 x8 (CPU)
Slot 3: PCIe Gen3 x4 (CPU)
Slot 4: PCIe Gen3 x4 (CPU)
Note: Slot 4 is preinstalled with a 10GbE network adapter

USB Port 2 x Type-C USB 3.1 Gen2 10Gbps

4 x Type-A USB 3.1 Gen2 10Gbps

LED Indicators HDD 1-16, Status, LAN, Storage expansion port status

Buttons Power, Reset

System Warning Voice prompts

Form Factor 3U Rackmount

Dimensions (H x W x D) 130 x 481 x 573.5 mm

5.1 x 18.8 x 22.6 inch

Weight 13.76 kg

Power Supply Unit 500W (x2), 100-240V

Power Consumption (W) In operation: 130.43 W

Fan System: 4 x 9.2cm fan (12V DC)

Sound Level 53dB(A)

Operating Temperature & Relative
Humidity

0 ~ 40˚C ( 32˚F ~ 104˚F ), 5 ~ 95% RH non-condensing, wet bulb: 27˚C
(80.6˚F)

Security Slot Kensington Security Slot

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors,
or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front
of operating NAS.
Designs and specifications are subject to change without notice.