TS-1277XU-RP-2600-8G
Hardware Specification
TS-1277XU-RP-2600-8G
CPU AMD Ryzen™ 5 2600 6-core/12-thread 3.4 GHz processor, Turbo Core 3.9
GHz
Architecture: 64-bit
Graphics: Optional (with PCIe expansion card)
Encryption Engine: AES-NI
System Memory 8 GB DDR4 (2 x 4 GB)
Maximum Memory 64 GB (4 x 16 GB)
Memory Slot 4 x Long-DIMM slots
(For dual- or quad-DIMM configurations, you must use a pair of identical
DDR4 modules.)
Drive Bay 12 x 3.5-inch SATA 6 Gbps bays
Drive Compatibility 3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
10 Gigabit Ethernet Port 2 x 10GbE SFP+ ports
Gigabit Ethernet Port 2 x RJ45
USB Port 2 x USB 3.1 Gen 2 (10 Gbps)
1 x USB 3.1 Gen 2 (10 Gbps) Type-C
1 x 3.1 Gen 2 (10 Gbps) Type-A
4 x USB 3.0 Type-A
PCIe Slot Slot 1: Gen3 x8 (if Slot 2 is occuied, then the speed becomes Gen3 x4)
Slot 2: Gen3 x4
Slot 3: Gen3 x8 (if Slot 4 is occuied, then the speed becomes Gen3 x4)
Slot 4: Gen3 x4
HDMI Output Optional: With PCIe expansion card
Form Factor 2U Rackmount
Dimensions (H x W x D) 88.3 x 482 x 562 mm
Weight 13.73 kg
Power Supply Unit 300W (x2), 100-240V AC, 50/60Hz
Power Consumption (W) In operation: 106.66 W
Fan 2 x 7cm smart fan (12V DC)
Operating Temperature & Relative
Humidity
0 ~ 40˚C ( 32˚F ~ 104˚F ), 5 ~ 95% RH non-condensing, wet bulb: 27˚C
(80.6˚F)
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause
errors, or prevent the operating system from starting.
Loading...