QLogic EP2532 User Manual

EP2532
Dual Port 8Gbps Fibre Channel (FC) to PCI Express Controller
Benefits
Virtualization optimized Power optimized Reliability, Availability, Serviceability (RAS) optimized Security optimized Management optimized
Features
Fibre Channel 8Gb to PCI Express x8 1600 MBps (full-duplex) per port 200,000 initiator and target IOPS per port Integrated SSRAM Small footprint (31mm x 31mm) package StarPower™ technology
DATA SHEET
EP2532 Controller. The EP2532 is a PCI Express to 8Gb Fibre Channel
Virtualization Optimized. The EP2532 delivers enhanced security, Quality
of Service (QoS), and enables dynamic provisioning. The EP2532 allows multiple logical (virtual) connections to share the same physical port. Each logical connection has its own resources and the ability to be managed independently.
Power Optimized. The EP2532 takes advantage of QLogic StarPower
technology, ensuring power efficiency. QLogic StarPower technology offers dynamic and adaptive power management features such as power and bandwidth optimized intelligent PCI Express link training.
RAS Optimized. The EP2532 ensures the highest level of reliability by
offering Overlapping Protection Domains (OPD) on both the data and control paths. In addition, the EP2532 Enhanced Hardware Assist Firmware (FW) Tracing (EHAFT) feature provides a comprehensive debug tool to capture FW and Fibre Channel traces.
Security Optimized. The EP2532 enables SAN-level authentication (FC-SP),
fabric-level isolation (NPIV), and is capable of end-to-end data integrity (T10).
Management Optimized. The EP2532 is backward compatible with 4Gb and
2Gb speeds. The EP2532’s API compatibility with 4Gb products accelerates deployment while ensuring application compatibility.
Investment Protection. For over 15 years, QLogic has been a technological
leader with products that address the current needs of customers, yet provide strong investment protection to support emerging technologies and standards. QLogic stands alone in the industry with its product portfolio depth and experience in successfully delivering technological solutions that address the needs of today and tomorrow.
EP2532 Dual Port 8Gbps Fibre Channel (FC) to PCI Express Controller
DATA SHEET
Fibre Channel Specifications
Negotiation
8/4/2Gbps auto-negotiation
IOPS
200,000 initiator and target IOPS
Class of service
2 and 3
Topology
FC-AL, FC-AL2, point-to-point, switched fabric
Protocols
FCP-3-SCSI FC-Tape (FC-2) FICON (FC-SB-2) FC-VI
PCI Express Interface
Compliance
PCI Express Base Specification
rev. 2.0
PCI Express Card Electromechanical Specification
rev. 2.0
PCI Bus Power Management Interface
Specification
PCI Hot Plug Specification
rev. 1.0
rev. 1.2
Electrical
PCIe x8 maximum Gen1 rate PCIe x4 maximum Gen2 rate
Controller Specifications
Ports
Dual 8Gbps Fibre Channel
Memory
Integrated 1-MB per port SSRAM
Input voltages
Core: 1.0V SERDES: 1.8V I/O: 3.3V
Temperature
110° C maximum junction temperature
Airflow
System-design dependant
Power consumption
4.0 Watts (typical)
Storage Temperature
-45 to 125°C
RoHS compliance
RoHS 6
Packaging
31mm x 31mm 880-ball (FCBGA) Ball pitch 1.0 mm
Ordering Information
EP2532
Ships with a minimum order quantity of 108 devices (27 devices per tray x 4 trays), and increments in a multiple of 27 (1 tray)
Corporate Headquarters QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656 949.389.6000 www.qlogic.com
Europe Headquarters QLogic (UK) LTD. Quatro House Lyon Way, Frimley Camberley Surrey, GU16 7ER UK +44 (0) 1276 804 670
© 2007–2008 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide. QLogic, the QLogic logo, StarPower, and SANtrack are trademarks or registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure. QLogic Corporation reserves the right, without notice, to make changes in product design or specifications.
83532-580-01 C 2
Loading...