wave
speaker connections
blue 4 c h a m p P L A 8 8 5 • P L A 1 0 8 5
2 CH Stereo Output Mode with Mono Bridged Subwoofer Output
pla885
pla1085
MINIMUM |
28 |
SPEAKER IMPEDANCE 4 OHMS!
L
SPEAKERS 
R SUBWOOFER
blue |
wave |
speaker connections |
|
|
5 c h a m p s P L A 1 5 8 5 |
5 CH Output Mode FRONT speakers |
|
L |
R |
pla1585
29
L |
R |
|
|
REAR speakers |
SUBWOOFER |
com.pyleaudio.www
.damage improperlyserviced,orsubjecttomisuse,neglect,oraccidental Thiswarrantywillbeconsideredvoidiftheunitwastamperedwith, replacementofthedefectiveunitwhenitisreturnedtous.prepaid Ourobligationunderthiswarrantyislimitedtotherepairor
expiration.date handling,andinsurance,orprovideyourVisa/MCnumberwith •alsoincludeacheckormoneyorderfor$1200.forreturnshipping, and.A.Rnumber •includeinyourletteryourreturnaddress,daytimephonenumb •Abriefletterindicatingtheproblemyouareexperiencing •Acopyofyoursalesreceiptorotherproofofpurchase Youmustalsoincludethefollowingitems:
Brooklyn,NY11204
160063rdStreet
PyleServiceCenter
#.A.R
andshippedprepaidto: Whenreturningaproducttousforwarrantyserviceitmustbecarefullypacked
relatingtoyour.return #.A.Rmustappearontheoutsideofyourpackageandonallpape numberat(718)236-6948toobtainaReturnAuthorization.numberThis ToobtainwarrantyserviceyoumustfirstcallourConsumerReturnHotline
yourunitwillberepairedorreplacedatthesolediscretionof.Pyle Shouldtheproductfailduetofactorydefectsinmaterialorworkmanship,
warrantyislimiteder,totheoriginalretail.purchase inmaterialandworkmanshipfortwo(2)yearsfromthedateof.purchaseThis .shipmentProductspurchasedintheUSAarewarrantedtobefreeofdefects AllPyleproductsarecarefullyconstructedandthoroughlytestedbefore
|
blue |
amplifiers |
e |
|
|
limitedwarrantypolicy |
|
|
user’s manual |
blue wave
h i g h p e r f o r m a n c e c a r a u d i o a m p l i f i e r
congratulationswave...
blue on your purchase of a Pyle Blue Wave Series amplifier. This amplifier extends the Pyle tradition into a totally new series of amps, designed from the ground up to deliver the power, performance and flexibility the modern car audio enthusiast demands.
When you check the list of features offered by the PLA485, PLA785, PLA885, PLA1085, PLA1285, and PLA1585, you’ll know you made the right choice with a Pyle Blue Wave amplifier.
wave
table of contents
blue
general features |
2-3 |
mono input connections |
20 |
|
features and specifications |
|
PLA885/1085 |
||
|
high level mono input connections |
|
||
PLA485 |
4-5 |
|
||
PLA885/1085 |
21 |
|||
PLA785 |
6-7 |
|||
5 channel input connections |
|
|||
PLA1285 |
8-9 |
|
||
PLA885/1085 |
10-11 |
PLA1585 |
22 |
|
features and specifications |
|
high level input connections |
|
|
|
PLA1585 |
23 |
||
PLA1585 |
12-13 |
|||
mono input connections |
|
|||
electrical connections |
|
24 |
||
|
PLA1585 |
|||
|
|
|
||
PLA485/785/1285 |
14 |
high level mono input connections |
|
|
PLA885/1085/1585 |
15 |
|
||
PLA1585 |
25 |
|||
|
|
|||
stereo input connections |
|
speaker connections |
|
|
PLA485/785/1285 |
16 |
PLA485/785/1285 |
26 |
|
mono input connections |
|
speaker connections |
|
|
|
PLA885/1085 |
27-28 |
||
PLA485/785/1285 |
17 |
|||
speaker connections |
|
|||
|
|
|
||
2/4 channel input connections |
|
PLA1585 |
29-30 |
|
PLA885/1085 |
18 |
mounting and installation |
31 |
|
high level input connections |
|
protection circuitry and troubleshooting |
32 |
|
PLA885/1085 |
19 |
precautions |
33 |
wave
general features
blue
PLA485 |
PLA785 |
PLA1285 |
|
High Performance 600 Watt 2 Channel |
High Performance 800 Watt 2 Channel |
High Performance 1400 Watt 2 Channel |
|
Bridgeable MOSFET Amplifier |
Bridgeable MOSFET Amplifier |
Bridgeable MOSFET Amplifier |
|
· 300 Watts x 2 Output |
· 400 Watts x 2 Output |
· 700 Watts x 2 Output |
|
· 600 Watts x 1 Bridged Output |
· 800 Watts x 1 Bridged Output |
· 1400 Watts x 1 Bridged Output |
|
· Variable Hi/Lo Electronic Crossover Network |
· Variable Hi/Lo Electronic Crossover Network |
· Variable Hi/Lo Electronic Crossover Network |
|
· Variable Bass Boost (0 - +18 dB @ 60Hz) |
· Variable Bass Boost (0 - +18 dB @ 60Hz) |
· Variable Bass Boost (0 - +18 dB @ 60Hz) |
|
· Variable Input Level (Gain) Control |
· Variable Input Level (Gain) Control |
· Variable Input Level (Gain) Control |
2 |
· Remote Turn On/Off |
· Remote Turn On/Off |
· Remote Turn On/Off |
|
· Gold Plated RCA Inputs |
· Gold Plated RCA Inputs |
· Gold Plated RCA Inputs |
|
· High Level MOLEX Input |
· High Level MOLEX Input |
· High Level MOLEX Input |
|
· Power ON LED Indicator |
· Power ON LED Indicator |
· Power ON LED Indicator |
|
· LED Protection Indicator |
· LED Protection Indicator |
· LED Protection Indicator |
|
· S/N Ratio: > 95 dB |
· S/N Ratio: > 95 dB |
· S/N Ratio: > 95 dB |
|
· THD: <0.04% |
· THD: <0.04% |
· THD: <0.04% |
|
· Thermal Protection |
· Thermal Protection |
· Thermal Protection |
|
· Overload Protection |
· Overload Protection |
· Overload Protection |
|
· Short Circuit Protection |
· Short Circuit Protection |
· Short Circuit Protection |
|
· Anti-Thump Turn-On |
· Anti-Thump Turn-On |
· Anti-Thump Turn-On |
|
blue wave
PLA885 |
PLA1085 |
PLA1585 |
|
High Performance 1000 Watt 4 Channel |
High Performance 1400 Watt 4 Channel |
HighPerformance1400Watt5Channel |
|
Bridgeable MOSFET Amplifier |
Bridgeable MOSFET Amplifier |
Bridgeable MOSFET Amplifier |
|
· 250 Watts x 4 Output |
· 350 Watts x 4 Output |
· 250 Watts x 4 Output.+ 400 Watts x 1 Output |
|
· 500W x 2 Bridged Output (250W x 2 + 500W x 1) |
· 700W x 2 Bridged Output (350W x 2 + 700W x 1) |
· 500 W x 2 Bridged Output ( 250 W x 2 + 500 W x 1) |
|
· Dual Variable Hi/Lo Electronic Crossover Network |
· Dual Variable Hi/Lo Electronic Crossover Network |
· Dual Variable Hi/Lo Electronic Crossover Network |
|
· Dual Variable Bass Boost (0 - +18 dB @ 60Hz) |
· Dual Variable Bass Boost (0 - +18 dB @ 60Hz) |
· Dual Variable Bass Boost (0 - +18 dB @ 60Hz) |
|
· Variable Input Level (Gain) Control |
· Variable Input Level (Gain) Control |
· Variable Input Level (Gain) Control |
3 |
· Remote Turn On/Off |
· Remote Turn On/Off |
· Remote Turn On/Off |
|
· Gold Plated RCA Inputs |
· Gold Plated RCA Inputs |
· Gold Plated RCA Inputs |
|
· High Level MOLEX Inputs |
· High Level MOLEX Inputs |
· High Level MOLEX Inputs |
|
· Power ON LED Indicator |
· Power ON LED Indicator |
· Power ON LED Indicator |
|
· LED Protection Indicator |
· LED Protection Indicator |
· LED Protection Indicator |
|
· S/N Ratio: > 95 dB |
· S/N Ratio: > 95 dB |
· S/N Ratio: > 95 dB |
|
· THD: <0.04% |
· THD: <0.04% |
· THD: <0.04% |
|
· Thermal Protection |
· Thermal Protection |
· Thermal Protection |
|
· Overload Protection |
· Overload Protection |
· Overload Protection |
|
· Short Circuit Protection |
· Short Circuit Protection |
· Short Circuit Protection |
|
· Anti-Thump Turn-On |
· Anti-Thump Turn-On |
· Anti-Thump Turn-On |
|
· Tri-Mode Configurable |
· Tri-Mode Configurable |
· Tri-Mode Configurable |
|
wave
features and controls
blue 2 c h a m p P L A 4 8 5
input level control
pla485
crossover mode selector |
high pass frequency control |
bass boost level |
low pass frequency control |
|
4 |
|
protection LED |
high level inputs |
|
low level inputs |
power LED |
speaker connections |
power terminals |
power fuse
featureswaveand specifications
blue 2 c h a m p P L A 4 8 5 PLA485
2 channel amplifier
crossover mode selector when used with normal, full range systems, set this switch to “FULL.” If you wish to use the internal crossover to power a driver of specific frequency range, use the “LOWPASS” or “HIGHPASS” settings.
input level control use this control to match the outputs of your head unit to the amplifier. Starting with your head unit set at about the 2 o’clock position, increase the amp level control until distortion begins to occur, and reduce slightly from this point.
output power @ 14.4v DC, 1KHz |
|
|
RMS Power @ 4 Ohms |
50 |
Watts x 2 |
RMS Power @ 2 Ohms |
80 |
Watts x 2 |
Maximum Power Output |
300 Watts x 2 |
|
frequency response |
15 |
Hz-30 KHz |
low pass frequency control when the crossover selector switch is in “low pass” mode, this control sets the upper frequency limit for audio program sent to the speakers.
high pass frequency control when the crossover selector switch is in “high pass” mode, this control sets the lower frequency limit for audio program sent to the speakers.
bass boost level control this control permits adjustment of the bass level up to an increase of approximately 18 dB.
low level inputs this amp features gold-plated RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables.
high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors.
power LED this indicator is illuminated when power is applied.
protection LED this indicator is illuminated when built-in protection circuitry is activated.
power fuse the fuse protects the amplifier and your car’s electrical system from short circuit conditions.
power terminals use these connectors to deliver power, ground and remote turn-on control to the amplifier.
speaker connections these terminals are 14K gold plated to guarantee high conductivity and minimum signal loss.
input impedance |
|
|
low level inputs |
10K Ohms |
|
high level inputs |
100 Ohms |
|
input sensitivity |
|
5 |
low level inputs |
250mV |
|
high level inputs |
2.5V |
|
power supply voltage |
14.4V DC Neg. Ground (10.5-16V) |
|
matching speaker impedance |
|
|
stereo mode |
2-4 Ohms |
|
bridged mode |
4-8 Ohms |
|
maximum current draw |
15A |
|
dimensions (W x H x L) |
|
|
mm |
300 x 62 x 209 |
|
inches |
11.8 x 2.4 x 8.2 |
|
wave
features and controls
blue 2 c h a m p P L A 7 8 5
input level control
pla785
crossover mode selector |
high pass frequency control |
bass boost level |
low pass frequency control |
|
6 |
|
protection LED |
high level inputs |
|
low level inputs |
power LED |
speaker connections |
power terminals |
power fuse
featureswaveand specifications
blue 2 c h a m p P L A 7 8 5 PLA785
2 channel amplifier
crossover mode selector when used with normal, full range systems, set this switch to “FULL.” If you wish to use the internal crossover to power a driver of specific frequency range, use the “LOWPASS” or “HIGHPASS” settings.
input level control use this control to match the outputs of your head unit to the amplifier. Starting with your head unit set at about the 2 o’clock position, increase the amp level control until distortion begins to occur, and reduce slightly from this point.
output power @ 14.4v DC, 1KHz |
|
|
RMS Power @ 4 Ohms |
85 |
Watts x 2 |
RMS Power @ 2 Ohms |
125 Watts x 2 |
|
Maximum Power Output |
400 Watts x 2 |
|
frequency response |
15 |
Hz-30 KHz |
low pass frequency control when the crossover selector switch is in “low pass” mode, this control sets the upper frequency limit for audio program sent to the speakers.
high pass frequency control when the crossover selector switch is in “high pass” mode, this control sets the lower frequency limit for audio program sent to the speakers.
bass boost level control this control permits adjustment of the bass level up to an increase of approximately 18 dB.
low level inputs this amp features gold-plated RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables.
high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors.
power LED this indicator is illuminated when power is applied.
protection LED this indicator is illuminated when built-in protection circuitry is activated.
power fuse the fuse protects the amplifier and your car’s electrical system from short circuit conditions.
power terminals use these connectors to deliver power, ground and remote turn-on control to the amplifier.
speaker connections these terminals are 14K gold plated to guarantee high conductivity and minimum signal loss.
input impedance |
|
|
low level inputs |
10K Ohms |
|
high level inputs |
100 Ohms |
|
input sensitivity |
|
7 |
low level inputs |
250mV |
|
high level inputs |
2.5V |
|
power supply voltage |
14.4V DC Neg. Ground (10.5-16V) |
|
matching speaker impedance |
|
|
stereo mode |
2-4 Ohms |
|
bridged mode |
4-8 Ohms |
|
maximum current draw |
20A |
|
dimensions (W x H x L) |
|
|
mm |
300 x 62 x 281 |
|
inches |
11.8 x 2.4 x 11 |
|
Loading...