Pure Tempus-1 User Manual

Warranty information

Imagination Technologies Ltd. warrants to the end user that this product will be free from defects in materials and workmanship in the course
of normal use for a period of two years from the date of purchase. This guarantee covers breakdowns due to manufacturing or design faults;
it does not apply in cases such as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not
authorised by us. Please return your warranty card or visit www.pure.com/register to register your product with us. Should you have a problem
with your unit please contact your supplier or contact PURE Support at the address shown on the rear of this manual.

Copyright

Copyright 2005 by Imagination Technologies Limited. All rights reserved. No part of this publication may be copied or distributed, transmitted,
transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic,
mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission of Imagination Technologies
Limited.

Disclaimer

Imagination Technologies Limited makes no representation or warranties with respect to the content of this document and specifically disclaims
any implied warranties of merchantability or fitness for any particular purpose. Further, Imagination Technologies Limited reserves the right to
revise this publication and to make changes in it from time to time without obligation of Imagination Technologies Limited to notify any person
or organization of such revisions or changes.

Trademarks

TEMPUS-1, SnoozeHandle, PURE, the PURE logo, PURE Digital, the PURE Digital logo, Imagination Technologies, and the Imagination
Technologies logo are trademarks or registered trademarks of Imagination Technologies Limited. All other product names are trademarks of their
respective companies.

Version 2 April 2005

Controls and Connectors

Autotune – press and hold for around two seconds to scan the full range of

Front panel

Rear panel

digital frequencies in Band III. Press and release to scan UK only Band III.

Standby - press to switch between standby mode and power on
Sleep - press and repeat to set TEMPUS-1 to enter standby in 15, 30, 45, 60

or 90 minutes

Info - press and repeat to change the text shown on the bottom of the

display between scrolling text, clock, time and date, programme type,
multiplex name, channel, mode and signal quality.

Menu - press to access the setup menu, turn the Tune knob to scroll through
and push to select an option. You can also press Menu to exit menus and
menu options.

Preset (1-5) - press and hold for around two seconds to store a station
under that number. Press and release to select and listen to a preset.
Press (

Tune - turn to scroll through and push to select radio stations and menu

options.

Vol – turn to adjust the volume.
Backlit LCD screen.

SnoozeHandle™ - tap to snooze an alarm, view clock or station/time/date.

In standby - tap to illuminate the clock or hold for full brightness.

USB - connect to a PC for software upgrades

Digital Out - optical S/PDIF - connect to an external amplifier or recorder

Stereo Out - analogue output - connect to an external amplifier or recorder

Headphone - connect to headphones

Aux Speaker - connect to the optional ST-1 speaker for full stereo sound

12V DC - connect to mains adapter
Aerial - connect to the supplied telescopic or other aerial

) first to access presets 6-10.

1

Quick start

This section provides information on how to set up and start using your radio.

Fully extend the aerial, connect the mains adapter and plug in to your power supply.

1

Press the Standby button to switch the unit on.

2

The screen lights up and a progress bar indicates the progress of an autotune to find the stations available. If

you live outside the UK this local autotune may find very few or no stations. If no stations you see the message
‘No stations available’ and you see a menu of options. Use the Tune knob to scroll through and select the
‘Autotune full’ option. Alternatively if very few stations are found hold down the Autotune button for over 2
seconds. This full autotune may take a minute or more.

Adjust the volume control if required.

3
4

Turn the Tune knob to see all the stations available. Push to select and listen to another station.

Press the Info button and repeat to cycle through the display modes including the full screen clock.

5

2