Pulsar PWE1600, PWE1800 Owner's Manual

1
Table Of Contents
Topic Page #
Important Safety Tips, Precautions, Warnings, and Usage Instructions
2-5
Operating Instructions 9-12
Detergents 12-13
Clean-up and Storage 14-15
Cleaning Tips 16
Technical Data 17
Troubleshooting Tips 18
Limited Warranty 19- 20
1600 PSI Pressure Washer
Parts 21- 22
2
GROUND FAULT CIRCUIT INTERRUPTER (GFCI)
This pressure washer is provided with a ground fault circuit interrupter (GFCI) built into the plug of the power supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection.
This unit is equipped with a Ground Fault Circuit Interrupter (GFCI). When connecting the GFCI to the receptacle, the indicator should appear red. If the indicator is not red, depress the RESET button on the GFCI until the indicator appears red. If the indicator does not appear red, please see Section titled “Troubleshooting” for more information.
IMPORTANT SAFETY TIPS
Neverpoint the high-pressure nozzle at people or animals.
Neverdrink alcohol oruse drugswhile operatingthe pressure washer.
Neveroperatethepressurewasherwhilestanding in water.
Nevertouch the
the
the
electrical plugwithwet hands.
Never let electrical connectionsrest in water.
Neveroperate pressurewasherwithout the water turned on.
Neveruse hot water wit h this press ure wash er.
1600 PSI Pressure Washer
3
IMPORTANT SAFETY PRECAUTIONS
WARNING: When using this product, basic precautions should always be followed, including the following:
1. Read all instructions before using the product. Save all
safety instructions.
2. Do not operate the pressure washer when fatigued or under
the influence of alcohol or drugs.
3. Risk infection or injury – do not direct the high pressure
water stream at any people or animals.
4. Donot allow children to operate the pressure washer at any
time.
5. To re du ce th e ri sk of in jury , clos e s upe rvisi on is n ec ess ar y
when the pressure washer is used near children.
6. Know how to stop the unit and reduc e pressure immediately.
Be completelyfamiliar with the controls.
7. Stay alert – always be aw are of where you are directing the
high pressure spray
8. Keep cleaning area clear of all people.
9. Main safe footing and balance at all times – do not
overreach or standon an unstable support.
10. The work area should have adequate drainage to reduce the
possibility of a fa ll due to slippery surf ace s.
11. Follow the maintenanc e instructions specified in the manual.
12. To reduce the
the
risk of electrocution, keep all connections dry
and off the ground. Do not touch plug with wet hands.
GENERAL SAFETY PRECAUTIONS
1. Intended for outdoor household use only.
2. High-pressure hose can develop leaks from wear, abuse,
kinking etc. Do not use a da maged hose.
3. Do not use the pressure washer in are as ne ar combustible
mate rials, combustible fumes, or dust.
4. Some chemicals or detergents may be harmful if inhaled or
ingested causing severe injury. Use a respirator or mask whenever there is a chance that vaporsmay be inhaled.
1600 PSI Pressure Washer
4
Read all instructions included with the mask so you are certain the mask will provide the necessary protection against inhaling harmful vapors.
5. Before starting the pressure washer in cold weather, check all
of the parts of the equipment and be sure that ice has not formed. Do not store the unit anywhere that the temperature will fall below 0
°C(32° F).
6. DO NOT MAKE ANY MODIFICATIONS TO ANY OF THE
COMPONENTS! Units with broken or missing parts, or without the protective housing or covers should NEVER be operated
7. Keep the high-pressure hose connected to the pressure
washer and the spray gun while the system is pressurized. Disconnecting the hose while the unit is pressurized is dangerous, and may cause injury.
8. Do not leave the pressure washer unattended while the power
switch is ON.
9. Keep the water spray away from electrical wiring or fatal electric
shock may result.
SERVICING OF A DOUBLE-INSULATED APPLIANCE
In a double-insulated product, two systems of insulation are provided instead of grounding. No me ans of grounding is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement pa rts for a double-insulated product must be identical to the parts they re place. A double-insulated product is ma rked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED”. This symbol may also be marked on the product.
USE OF EXTENSION CORDS
Use of an extension cord with thisproduct is NOT RECOMMENDED. If you must use an extension cord, use only extension cords that a re intended for outdoor use . These cords are ide ntified by a marking “ACCEPTABLE FOR USE WITH OUTDOOR APPLIANCES, STORE INDOORS WHILE NOT IN USE.” Use only extension cords having an
1600 PSI Pressure Washer
5
electrical rating not less than the rating of the product. Examine the
the
the
extension cord before use. Do n ot use damaged extension cords! Do not pull on c ord to disconnect from receptacle alwaysdisconnect by pulling on plug. Keep cord away fromheat andsharp edges. Alwaysdisconnect the extension cord from the receptacle before disconnecting the product from the extension cord.
WARNING – To reduce the risk of electrocution, keep all connections dry and off
the ground. Do not touch the plug with wet hands.
PROPER USE OF THE PRESSURE WASHER
THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONLY!
DO NOT USE HOT WATER IN THIS PRESSURE WASHER.
1.
Operate the pressure wa sher at no more tha n the fluid pressure rated for the pressure washe r. Never run the pressure washer without a wate r supply. Running the unit without a wate r supply will cause irreparable damage to the unit.
2. Make sure that the water supply you use for the pre ssure
washer is not dirty, sandy, and does not hold any corrosive chemical products. Using a dirtywater supply will compromise the life of the pressure washer.
3. CAUTION - The pressure washer can be used for a variety of
applications including washing cars, boats, patios, decks, garages etc. where high pressure is necessary to remove dirt and debris. High-pressure water flow can damage the work surface if not used properly! See the section titled “Operating Instructions” for more details. Always test the spray in an open area first.
4. NEVER move the unit by pulling on the high pressure hose. Use
the handle provided on the top of the unit.
5. Always hold the high pressure gun and wand with two hands.
Keep one hand on the gun/trigger, while supporting the wand with the other hand (see diagram).
6. When dispensing detergent,the pressure washer applies
detergent to the cleaning area at low pressure only. Once the deterge nt has been a pplied, spray the detergent off of the work area byusing the adjustable nozzle.
1600 PSI Pressure Washer
6
ASSEMBLY INSTRUCTIONS
Unpacking The Carton
After opening the carton, please remove all parts and che ck them against the following list of components that a re included:
A. High Pressure Washer D. Adjustable Nozzle B. Gun E. Water Intake Filter (Pre-Installed) C. High Pressure Hose F. Two-Way Connector
To assemble the enclosed parts, please refer to the steps that follow:
1600 PSI Pressure Washer
E
F
D
Step 1
1600 PSI Pressure Washer
- Take the hose lock to position A to unlock.
- Attach the high pressure hose to the gun.
- Then push the hose lock to position B to lock the fitting.
A
B
A
B
B
D
7
Step 2
Insert the adjustable spray nozzle intothe gun. Push and turn the adjustable nozzle clockwise onto the gun until it is hand tight andto lock it in place. When the pieces are joined
prope rly, you c annot se parate th e two compon ents by pulling out on t he
adjustable nozzle. Allattachments must be inserted intothe gun for proper use.
Loading...
+ 8 hidden pages