Pulsar PT3003X1, PT3161X1, PT3433X1, PT3434X1, PT3613X1 Instruction manual

CAL. VD53 & VD54

CHRONOGRAPH

ENGLISH

TIME/CALENDAR

l

Hour, minute and second hands

l

Date displayed in numerals (VD53 only)

STOPWATCH

l

Measures up to 60 minutes in one second increments.

CALIBER OF THREE HANDS WITH THREE EYES
(MINUTES, 1/1 SECOND CHRONOGRAPH, 24-HUOR INDICATOR)

English

2

English

3

HOUR.

24

6

12

18

60

45 15

30

60

5

SCREW DOWN CROWN

[for models with screw down crown]

Locking the crown

1

Turn Crown counterclockwise until you no

longer feel the threads turning.

2

Crown can be pulled out.

1

Push Crown back in to normal position.

2

Turn Crown clockwise while pressing it

lightly until tight.

Unlocking the crown

DISPLAY AND CROWN/BUTTONS

c: Second click

b: First click

a: Normal position

Hour hand

STOPWATCH

minute hand

24 - hour hand

Minute hand

A

a b c

B

Date (VD53 only)

Second hand

CROWN

STOPWATCH
second hand

English

4

English

5

HOUR.

24

6

12

18

60

60

45 15

30

5

60

45 15

30

60

ADJUSTING THE STOPWATCH HAND POSITION

l

Before setting the time, be sure to check that the STOPWATCH

hands

are in the “0” position when the

STOPWATCH is reset

(for resetting

the STOPWATCH, see "STOPWATCH".)

A

B

Press A or B to reset the STOP­WATCH second and minute
hands to the “0” position.

s

STOPWATCH
minute hand

Push back in to normal
position.

CROWN

STOPWATCH
second hand

A

B

CROWN

Pull out to second click

s

OR

A: The hands move counterclockwise.
B: The hands move clockwise.

* If either of the STOPWATCH hands is not at the "0" position, reset

them , following the procedure below:

CROWN

TIME SETTING

Date (VD53 only)

Hour hand

Minute hand

Second
hand

l

Before setting the time, check that the stopwatch measurement is

stopped.

1 Pull out to first click, and turn clockwise until the previous day’s date
appears. (VD53 only)

2

Pull out to second click when the second hand is at the 12 o’clock position.
The second hand will stop on the spot. And advance the hour and

minute hands by turning the crown.

3 Turn clockwise until the desired date appears. (VD53 only)
4 Turn to set the hour and minute hands.
5 Push back in to normal position in accordance with a time signal.