Pse archery COMPOUND BOW Manual

4.3 (4)
Pse archery COMPOUND BOW Manual

Precision Shooting Equipment, Inc.

Compound Bow

User’s Guide

Thank you from the entire PSE family for purchasing a PSE bow. Your PSE bow was manufactured from the finest materials available and handcrafted with pride in the USA. With proper care and use you will enjoy this product for years to come.

We at PSE wish you much success in the archery field you have chosen to pursue.

Please read this entire booklet before shooting or adjusting your bow.

Remember, most adjustments to a compound bow should be made in a bow press.

Whenever shooting a bow, be certain of your target as well as what else lies downrange.

REGISTRATION

Fill out the reverse side of this page completely, remove it, and mail to:

PSE Warranty Registration

P.O. Box 5487

Tucson, AZ 85703

BOW TERMINOLOGY

IDLER WHEEL

LIMB

STRING

LIMB

POCKET

CABLE

LIMB

BOLT PEEP SIGHT

SIGHT

 

CABLE

 

GUARD

 

SLIDE

 

CABLE

 

GUARD

 

GRIP

STABILIZER

STRING

LOOP

 

ARROW

 

REST

 

BOW

 

SLING

 

RISER

TYPICAL ONE-CAM BOW

CAM

PN 94418

Rev. 05/06

YOUR LOCAL AUTHORIZED PSE DEALER IS YOUR BEST SOURCE FOR INFORMATION AND ASSISTANCE. VISIT THEM FOR THESE AND OTHER TYPICAL SERVICES:

1.Adjusting draw length and draw weight

2.Adjusting / changing let-off

3.Replacing / servicing strings and cables

4.All aspects of bow tuning

5.Correct arrow selection

6.Mounting new accessories

7.Adjusting tiller

IMPORTANT

WARRANTY REGISTRATION

THIS FORM MUST BE RECEIVED BY PSE WITHIN 30 DAYS OF PURCHASE TO ACTIVATE WARRANTY

SERIAL # OF BOW

BOW MODEL

NAME

ADDRESS

ADDRESS

 

 

 

 

 

 

 

 

APT

 

 

 

CITY

 

 

 

 

 

 

 

 

 

STATE

 

COUNTRY

 

 

 

 

 

 

 

POSTAL CODE

 

EMAIL ADDRESS

 

 

 

 

 

 

 

 

 

 

 

DATE PURCHASED

/

/

PHONE (

)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAIL TO: PSE WARRANTY REGISTRATION

P. O. BOX 5487

TUCSON, AZ 85703

2

Precision Shooting Equipment, Inc.

Compound Bow

User’s Guide

Thank you from the entire PSE family for purchasing a PSE bow. Your PSE bow was manufactured from the finest materials available and handcrafted with pride in the USA. With proper care and use you will enjoy this product for years to come.

We at PSE wish you much success in the archery field you have chosen to pursue.

Please read this entire booklet before shooting or adjusting your bow.

Remember, most adjustments to a compound bow should be made in a bow press.

Whenever shooting a bow, be certain of your target as well as what else lies downrange.

CONTACT PSE:

520-884-9065 www.pse-archery.com

BOW TERMINOLOGY

IDLER WHEEL

LIMB

STRING

LIMB

POCKET

CABLE

LIMB

BOLT PEEP SIGHT

SIGHT

 

CABLE

 

GUARD

 

SLIDE

 

CABLE

 

GUARD

 

GRIP

STABILIZER

STRING

LOOP

 

ARROW

 

REST

 

BOW

 

SLING

 

RISER

TYPICAL ONE-CAM BOW

CAM

PN 94418

Rev. 05/06

3

GENERAL OPERATING INSTRUCTIONS

Always inspect your bow thoroughly before each shooting session to insure that it is in good working order. Check for worn or missing components and have them replaced as required, i.e. bushings, spacers, etc.

Inspect your arrows to insure that they are straight and that each nock is in good condition. A cracked nock can break when fired from the bow and cause the bow to "dry fire" resulting in possible injury to the archer and damage to the bow.

When purchasing arrows for your bow, consult the selection chart from the arrow manufacturer and select the correct arrow for your application. Always use an arrow that meets the weight requirement marked on the specification label on the lower limb of your bow. Failure to do so could cause personal injury and damage to your bow.

BOW MAINTENANCE

Your PSE bow will give you many years of service if maintained and cared for properly.

IMPORTANT: Before servicing any PSE bow in a bow press, back out each limb bolt 4 complete turns from bottomed position.

Keep synthetic cables and strings waxed. Apply bow string wax to your synthetic cables and string before each shooting session.

Strings and cables must be replaced periodically. A worn cable or string can suddenly break causing serious injury to the archer and damage to the bow. It is recommended that the string and cables be replaced at least every 5,000 shots or 12 months.

Always store your bow in a cool dry place. High temperatures, such as those that can occur in a truck or interior of a vehicle, can cause serious damage to your bow.

After use in high humidity or damp conditions, wipe metal components of bow with a light oil.

Get the PSE BOW OWNER'S GUIDE video at www.pse-archery.com. This entertaining and informative video covers all aspects of modern bow technology. 60 minutes.

SAFETY

As with any weapon, safe operation of your PSE bow must always be the highest priority.

ALWAYS WEAR SAFETY GLASSES WHEN HANDLING A BOW.

Do not attempt to use your bow without proper instruction. Doing so can result in serious injury.

a.Never "dry-fire" any bow. Dry-fire is to draw and release the bowstring without an arrow on the string. Dry-firing will likely cause damage to the bow and serious injury to the archer.

b.Always be sure of your intended target as well as what lies behind the target area. An arrow can travel a considerable distance, so it is important to have a safe and sound backstop.

c.If you draw a bow and need to let it down, do so in a slow and careful manner. Keep your support arm straight and prepare for a rapid and violent let-down. Avoid hitting your hand on protruding accessories such as the cable guard or quiver. Keep your head and face back and out of danger during let-down. Never draw a bow with a peak weight above your comfort level. Always use a bow sling when drawing a bow.

d.Never modify any part of the bow or its components by drilling extra holes or removing material. This voids the warranty and presents safety problems.

4

Loading...
+ 8 hidden pages