volTag-LT6
6000mAh Lithium-Polymer Power Bank
with Ultra-Fast 2.4A USB Charging Port
& Built-in Lightning Connector
Charge your device on-the-go with this powerful 6000mAh lithium polymer power bank:
volTag-LT6. volTag-LT6 features a built-in Lightning Connector to charge all your devices
supporting Lightning Connector. volTag-LT6 also features an ultra-fast 2.4A USB Port to charge
other devices. volTag-LT6 is compatible with all smartphones & tablets. volTag-LT6 is available in
two classic colors.
Introduction
• volTag-LT6 power bank
• User Guide
Packaging Contents
• Battery Capacity: 6000mAh
• Battery Type: Lithium Polymer
• Input: 5V, 1.5A
• Output: USB Port: 2.4A
Lightning Connector: 1A
• Material: PC+ABS
• Charging Time: 5- 6 hours
Specification
1
Features
• Powerful Battery: volTag-LT6 features a powerful 6000mAh li-polymer power bank
• Built-in Lightning Connector: volTag-LT6 features a built-in Lightning Connector so that you can
charge your device without any hassle
• Ultra-Fast USB Port: Charge your devices via the ultra-fast 2.4A USB charging port
• Lightweight & Portable: volTag-LT6 is lightweight and easy to carry around
• Charge Two Devices: Charge two devices simultaneously with volTag-LT6
• Compatibility: volTag-LT6 is compatible with all devices supporting Lightning Connector & USB
Power
• Safe & Reliable: volTag-LT6 features short-circuit & over-charging protection.
• Colors: volTag-LT6 is available in two classic colors, Black & White
English
2
English
Please read all safety instructions and warnings thoroughly before using this product. Improper
use of this product may result in damage to this or attached products.
1. Do not disassemble the power bank or attempt to fix it.
2. Kindly use an original charging cable provided to charge the product.
3. Do not attempt to replace any part of this power bank or battery inside.
4. Do not crush, puncture, dispose of in fire, short the contacts or expose the
battery to water or other liquids.
5. Do not connect input and output in reverse.
6. Do not store or use the battery in a high temperature environment, including
intense sunlight or heat.
7. Avoid drops, bumps, abrasions and impacts.
8. If there is any reason to believe that there is damage to the battery,
discontinue use immediately.
9. If you find that the battery is too hot, is emitting an odor, or is deformed,
punctured or exhibits any suspicious or abnormal behavior, discontinue use
immediately and contact our customer service.
10. Always charge this product before extended storage.
Precautions:
3
English
• In order to view the amount of power left in volTag-LT6, short press the Multi-function Button.
The LED Indicator will light up indicating the amount of battery left in volTag-LT6.
1. Checking the remaining power left in volTag-LT6 power bank
• Connect the USB Input Port to any Laptop/Desktop
or to any USB Power Adapter, the LED Indicators will
light up indicating that volTag-LT6 is charging
normally. Once all the 4 LED Indicators light up,
volTag-LT6 is fully charged.
2. Charging volTag-LT6 power bank
Operation Instructions
1 2 3 4
<=25% <=50% <=75% <=100%
No of LED’s Active
% of power remaining
1. 2.4A USB Output Port
2. Lightning Connector
3. LED Indicator
4. Multi-function Button
5. USB Input
Appearance & Interface Description
1
2
3
5
4
4
English
3. Charging devices using volTag-LT6
• volTag-LT6 is compatible with all smartphones & tablets.
• Use the 2.4A USB Output Port to charge USB powered devices. Plug in one end
of the cable into the 2.4A USB Output Port and the other into the device you
wish to charge. Press the Multi-function Button to charge your plugged-in
device.
• Use the built-in Lightning Connector to charge Lightning Connector supported
devices. Plug in the Lightning Connector into your device. Press the
Multi-function Button to charge the plugged-in device.
• You can charge two devices simultaneously with volTag-LT6.
5
Spanish
1. Puerto de salida USB 2,4 A
2. Conector Lightning
3. Indicador LED
4. Botón de funciones múltiples
5. Puerto de entrada USB
Aspecto y descripción de la interfaz:
• Para ver la cantidad de energía restante en el volTag-LT6, presione brevemente
el botón de múltiples funciones. El indicador LED se encenderá para indicar el
porcentaje de batería restante en el volTag-LT6.
1. Comprobación de la energía restante en el banco de energía volTag-LT6
• Conecte el puerto de entrada USB a cualquier
computadora portátil/deescritorio o a cualquier
adaptador de energía USB, los indicadores LED
seencenderán para indicar que el volTag-LT6
está cargando normalmente. Cuando todos los
4 indicadores LED se enciendan, el volTag-LT6
estarácompletamente cargado.
2. Carga del banco de energía volTag-LT6
Instrucciones de operación
1 2 3 4
<=25% <=50% <=75% <=100%
Núm. de LED activos
% de energía restante
1
2
3
5
4
6
Spanish
3. Carga de dispositivos usando el volTag-LT6
• volTag-LT6 es compatible con todos los smartphones y tabletas.
• Use el puerto de salida USB de 2,4 A para cargar los dispositivos alimentados
por USB. Conecte un extremo del cable en el puerto de salida USB de 2,4 A y el
otro en el dispositivo que desea cargar. Presione el botón de funciones
múltiples para cargar el dispositivo conectado.
• Use el conector Lightning incorporado para cargar los dispositivos compatibles
con el conector Lightning. Conecte el conector Lightning en su dispositivo.
Presione el botón de funciones múltiples para cargar el dispositivo conectado.
• Puede cargar dos dispositivos simultáneamente con el volTag-LT6.
7
French
1. Port de sortie USB 2.4A
2. Prise d’alimentation
3. Voyant LED
4. Bouton multifonction
5. Port d’entrée USB
Apparence et description de l’interface
• Afin de vérifier la quantité d’énergie restante dans la batterie volTag-LT6,
appuyez brièvement sur le bouton multifonction. Le voyant LED s’allume et
indique alors l’énergie restante dans la batterie volTag-LT6.
1. Vérification de l’énergie restante dans la batterie volTag-LT6
• Connectez le port d’entrée USB à n’importe quel
ordinateur de bureau/portable ou à n’importe quel
adaptateur USB d’alimentation, les voyants LED
s’allument et indiquent que la batterie volTag-LT6
se charge normalement. Une fois que les 4 voyants
à LED sont allumés, la batterie volTag-LT6 est
totalement chargée.
2. Chargement de la batterie volTag-LT6
Mode d’emploi
1 2 3
4
<=25% <=50% <=75%
<=100%
Nombre de LED actifs
% d’énergie restante
1
2
3
5
4
8
French
3. Chargement de dispositifs avec volTag-LT6
• VolTag-LT6 est compatible avec tous les Smartphones et tablettes.
• Utilisez le port de sortie USB 2.4A pour charger des dispositifs alimentés par
USB. Branchez une extrémité du câble au port de sortie USB 2.4A et l’autre au
dispositif que vous souhaitez charger. Appuyez sur le bouton multifonction
pour charger votre dispositif après l’avoir connecté.
• Utilisez le connecteur d’alimentation intégré pour charger les dispositifs pris en
charge. Branchez le connecteur d’alimentation à votre dispositif. Appuyez sur le
bouton multifonction pour charger le dispositif connecté.
• La batterie volTag-LT6 vous permet de charger deux dispositifs simultanément.
Loading...