Promate DigiScope Digital Microscope User’s Manual
1
Promate DigiScope Digital Microscope
User’s Manual
Thank you for choosing DigiScope Digital Microscope!
DigiScope Digital Microscope has a wide scope of applications, such as,
1. Skin Check
2. Scalp Check
3. Industrial Inspection e.g. Printing Circuit Board (PCB) inspection, electronics
device inspection
4. Visual Assistance
5. Printing Inspection
6. Textile Inspection
7. Jewelry Inspection
8. Science Learning
9. ….. etc.
Please read this manual carefully before using DigiScope Digital Microscope.
Promate DigiScope Digital Microscope User’s Manual
2
Contents
Product Specifications.............................................................. 3
Safety Precautions ................................................................. 3
Contents and Name of Parts ..................................................... 4
Connecting to PC .................................................................... 4
System Requirements.............................................................................................5
Driver Installation Procedure.................................................................................5
Windows XP ................................................................................................6
Windows 2000 ...........................................................................................10
Windows 98se ............................................................................................13
Connecting Procedure..........................................................................................19
Operate DigiScope Digital Microscope .............................................................19
DigiCapture Application Software.......................................................................20
Picture / Video Folder..................................................................................21
Menu Function List......................................................................................25
Open The Picture .........................................................................................28
The opened picture can be displayed in full screen by clicking ................28
To return from full screen mode, just click the mouse left key. .............28
..................................................................................................28
Open The Video Or T ime Lapsed Video......................................................29
Q&A .................................................................................... 30
Copyright............................................................................. 31
Certification ......................................................................... 31
Limited Liability .................................................................... 31
Promate DigiScope Digital Microscope User’s Manual
3
Product Specifications
1. Resolution 640*480 VGA.
2. Built-in 1 optical lens.
3. Magnification power 10x ~ 200x.
4. Built-in LED light.
5. Frame rate up to 30 FPS
6. Interface USB (PC)
Remarks: The magnification power is the ratio of the real size of the an observe
object vs. the image show on a 15” monitor
Safety Precautions
1. Avoid touching the lens with finger to protect the product from
electrostatic damage.
2. Do not attempt to service this product yourself. Opening the covers may
expose you to dangerous voltage points or other risks.
3. When hands are wet, do not plug in or remove the adaptor or other
connectors.
4. Using or storing DigiScope Digital Microscope, do not plug in any other
cables, not belong to DigiScope Digital Microscope.
5. Do not use any detergent or volatile solution, which will damage the
camera case, painted surfaces & lens. Only use a soft cleaning cloth.
6. If the lens is dirty, please use a kens brush on soft cloth to wipe clean.
Avoid touching them with your fingers. Exercise care to avoid scratching
the lens.
7. Without protection, do not put
DigiScope Digital Microscope outdoor to
avoid the lens damaged by high temperature or humidity.
8. Using and storing DigiScope Digital Microscope at Temp: 0
o
C~ 40oC,
Humidity: 45%~85%.
9. If water has entered DigiScope Digital Microscope device and the
inspection stage, immediately turn the power off and remove the USB
cable. Do not use dryer neither.
10. Using or storing DigiScope Digital Microscope, need to watch all cables
to avoid trip over or DigiScope Microscope fall down.
11. To avoid electric shock, remove all electricity source before moving PC.
Promate DigiScope Digital Microscope User’s Manual
4
Contents and Name of Parts
1. DigiScope Digital Microscope Device
2. CD (user’s manual included)
3. USB Cable《USB2.0 / 1.1》 (1.8m)
4. Dock
Connecting to PC
System Requirements
● PC’s system requirements:
9 OS: Windows 98se, 2000, XP
9 CPU: Pentium IV 1.5G, Celeron, AMD Athlon or above
9 Memory: 128MB
9 HDD storage space: at least 150MB
( for driver and application software installation)
9 Graphic card: 16-bit or above
Promate DigiScope Digital Microscope User’s Manual
5
9 CD-ROM driver
9 USB2.0 / 1.1 port
Driver Installation Procedure
■ Power on PC and place installation CD into CD-ROM driver, do not connect
USB Cable from DigiScope Digital Microscope to PC before driver installation.
■ Select driver installation, and follow the instructions to complete installation.
■ as driver installation completed, and if system asking for re-start, please
re-start the Windows OS.
Note: The driver needs to be installed only once for each computer.
Windows XP
1. Place the installation CD into CD-ROM driver, the installation program should be
started automatically. Otherwise, please execute the AUTORUN.EXE directly
from the CD.
2. Select “Driver Installation” from DigiScope digital Microscope Installation
menu screen
3. Click “Next” to continue.
4. When the “Software Installation” warning message appears, click “Continue
Anyway”.
Promate DigiScope Digital Microscope User’s Manual
6
5. Click “Finish” to complete the installation.
6. Plug in USB Cable to DigiScope Digital Microscope to connect with PC, a
“Found New Hardware Wizard” will then appear. Click “Next” to continue.
Windows 2000
1. Place the installation CD into CD-ROM driver, the installation program should be
started automatically. Otherwise, please execute the AUTORUN.EXE directly
from the CD.
2. Select “Driver Installation” from DigiScope digital Microscope Installation menu
screen.
3. Click “Next” to continue.
4. When the “Digital Signature Not Found” warning message appears, click “Yes”
to continue the installation.
5. Click “Finish” to complete the installation.
6. Plug USB Cable to DigiScope Digital Microscope to connect with PC
Loading...