User Guide
AuraPack-10
Wireless Charging Power Bank with LED Display
10000mAh Lithium Polymer • Dual USB Ports • 3 Input Ports
Introduction
This Qi battery charger is a combination of wireless charging pad and portable power bank, built-in
high-power QI wireless charging transmitter and a high capacity 10000mAh rechargeable battery.
Incredibly sleek & lightweight, AuraPack-10is portable & easy to carry around. Engineered to be an
efficient and high-speed charging pad for iPhone X, iPhone 8 Plus, iPhone 8 and other Qi enabled
devices—just lay your phone onto the charging pad and go. There’s no need to remove your device
from its case when powering up, AuraPack-10 Wireless Charging Pad can charge through most
lightweight cases. Charge any USB powered devices with the ultra-fast dual USB charging ports.
With AuraPack-10, remain powered up always.
Packaging Contents
• AuraPack-10 Back-up Battery
• USB Charging Cable
• User Guide
Specifications
• Battery Capacity: 10000mAh
• Battery Type: Lithium Polymer
• Input:
Micro-USB Input: 5V, 2A
Lightning Connector Input: 5V, 1.5A
USB Type-C Input: 5V,2A
• Output:
USB 1: 5V, 1A
USB 2: 5V 2.1A
Wireless Charging: 5V/1A 5W(max)
• Charging Time: 3-4 hours
• Wireless Charging Distance: 3-8mm
English
1
English
2
Features
• 2-in-1 Technology: This Qi battery charger is a combination of wireless charging pad
and portable power bank, built-in high-power QI wireless charging transmitter and a
high capacity 10000mAh rechargeable battery.
• Qi Compatibility: Qi is a wireless technology that uses inductive charging. The
Cloud-Qi Wireless Charging Pad has been engineered to be Qi compatible, allowing it
to also charge phones, tablets and other accessories with Qi technology.
• Cable-Free: No more cables, no more messy charging stations. Simply place your Qi
enabled devices on the non-slip charging surface that’s designed to help secure your
device while charging. Keep charging simple, even when your hands—and day—are
full.
• Dedicated Lightning, Micro USB or USB-C inputs: The AuraPack-10 can be
recharged using either Lightning cable or MIcro- USB or USB-C cable. Now you can
conveniently use the same cable to charge your phone and external battery.
• Ultra-Fast Dual USB Ports: Charge your USB powered devices with the ultra-fast
dual USB ports
• Case Compatibility: Charge without removing your case. The AuraPack-10 Wireless
Charging Pad is engineered to work with most lightweight cases.
• Adaptive Charging: Automatically detects connected device and supplies maximum
charging current as per the device, delivering the fastest charge to all your USB
powered devices.
• Universal Connectivity: AuraPack-10 is compatible with all Qi compatible devices.
• Safe & Reliable: AuraPack-10 is totally safe & dependable as it features
over-charging & short-circuit protection
Precautions
Please read all safety instructions and warnings thoroughly before using this product.
Improper use of this product may result in damage to this or attached products.
1. Do not disassemble the back-up battery or attempt to fix it.
2. Kindly use an original charging cable provided to charge the product.
3. Do not attempt to replace any part of this Back-up battery or battery inside.
4. Do not crush, puncture, dispose of in fire, short the contacts or expose the battery
to water or other liquids.
5. Do not connect input and output in reverse.
6. Do not store or use the battery in a high temperature environment, including
intense sunlight or heat.
7. Avoid drops, bumps, abrasions and impacts.
8. If there is any reason to believe that there is damage to the battery, discontinue use
immediately.
9. If you find that the battery is too hot, or is emitting an odor, or is deformed,
punctured or exhibits any suspicious or abnormal behavior, discontinue use
immediately and contact our customer service.
10.Always charge this product before extended storage.
Appearance & Interface Description
1. USB 2 Port
2. USB 1 Port
3. USB-C Input Port
4. Micro-USB Input Port
5. Lightning Input Port
6. Power Button
7. LED Battery Level Display
8. Wireless Charging Area
English
3
English
Operation Instructions:
Checking the remaining power left in AuraPack-10 back-up battery
1. To view the remaining power left, press the power button once and view
the LED Battery Level Display
Charging AuraPack-10 back-up battery
• Connect one end of the Lightning Cable to AuraPack-10 and the other end to a
desktop/laptop or a USB Power Adapter. The Battery Level LED display will indicate
“IN” that shows the back-up battery is charging normally.
• Connect one end of the Micro-USB Cable to AuraPack-10 and the other end to
a desktop/laptop or a USB Power Adapter. The Battery Level LED display will indicate
“IN” that shows the back-up battery is charging normally.
• Connect one end of the USB-C Cable to AuraPack-10 and the other end to
a desktop/laptop or a USB Power Adapter. The Battery Level LED display will indicate
“IN” that shows the back-up battery is charging normally.
Charging USB chargeable devices using the USB Port
• Plug the USB cable into the USB output port on AuraPack-10 back-up battery
and the other end into the device.
Charging USB chargeable devices using the Wireless Charger
• Place your Qi-enabled device on the Wireless Charging Area ensuring your
device is properly aligned with the charging coil.
• Your device will now automatically begin charging.
4
English
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end of-life should be
disposed of separately from your household waste.
Please dispose of this equipment at your local community waste
collection/recycling center.
This product complies with European safety and electrical interference directives
This product does not contain environmentally hazardous materials (lead, mercury,
cadmium, hexavalent chromium and brominated flammable agents: PBB and PBDE).
5
Spanish
Descripción del aspecto y la interfaz
1. Puerto USB 2
2. Puerto USB 1
3. Puerto de entrada USB-C
4. Puerto de entrada Micro USB
5. Puerto de entrada Lightning
6. Botón de encendido
7. Indicador LED de nivel de batería
8. Área para carga inalámbrica
6
Instrucciones de operación:
Comprobación de la energía restante en la batería de respaldo AuraPack-10
1. Para conocer la energía restante, pulse una vez el botón de Encendido y mire el
indicador LED de Nivel de batería.
Carga de la batería de respaldo AuraPack-10
• Conecte un extremo del Cable Lightning al AuraPack-10 y el otro extremo a una
computadora de sobremesa o portátil o un adaptador de alimentación USB. El
indicador LED del nivel de la batería indicará "IN" que muestra que la batería de
respaldo se está cargando normalmente.
• Conecte un extremo del Cable Micro-USB al AuraPack-10 y el otro extremo a una
computadora de sobremesa o portátil o un adaptador de alimentación USB. El
indicador LED del nivel de la batería indicará "IN" que muestra que la batería de
respaldo se está cargando normalmente.
• Conecte un extremo del Cable USB-C al AuraPack-10 y el otro extremo a una
computadora de sobremesa o portátil o un adaptador de alimentación USB. El
indicador LED del nivel de la batería indicará "IN" que muestra que la batería de
respaldo se está cargando normalmente.
Carga de dispositivos cargables por el puerto USB usando el puerto USB
• Conecte el cable USB en el puerto de salida USB de la batería de respaldo
AuraPack-10 y el otro extremo en el dispositivo.
Carga de dispositivos cargables por el puerto USB usando el Cargador Inalámbrico
• Coloque su dispositivo habilitado para Qi en el Área de Carga Inalámbrica
asegurándose de que el dispositivo esté correctamente alineado con la bobina de carga.
• El dispositivo ahora comenzará a cargar automáticamente.
Spanish
7
French
Aspect & Description Interface
1. Port 2 USB
2. Port 1 USB
3. Port Entrée USB-C
4. Port Entrée Micro-USB
5. Port d’Entrée
6. Bouton d’Alimentation
7. Affichage LED Niveau de Batterie
8. Zone de Charge Sans Fil
8
Loading...