Prokit's Industries PT-1080 User Manual

PT-1080 Li-ion Cordless drill driver 10.8V

User’s Manual

st

Edition, 2011

1
©2011 Copy Right by Prokit’s Industries Co., Ltd.

1

Before any use, refer to the corresponding paragraph in the present manual.

DESCRIPTION OF SYMBOLS
Symbols are used in this manual to attract your attention to possible risks .The safety
symbols and the explication which accompany them must be perfectly understood. The
warning themselves do not prevent the risks and can not be a substitute for proper
methods of avoiding accidents.

This symbol before a safety comment indicates a precaution a warning or a danger.
Ignoring this warning can led to an accident for yourself or others. TO limit the risk of
injury, fire, or electrocution always apply the recommendations indicated.

Conforms to relevant safety standards.

GENERAL SAFETY INSTRUCTIONS

WARNING

Read all safety warnings and all instructions
Failure to follow all warnings and instructions may result in electric shock, fire and/or
serious injury.

Save all warnings and instructions for future reference

The term “power tool” in the warnings refer to your mains operated (corded) power tool or
battery operated (cordless) power tool.

1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions

can cause you to lose control.

2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.

c) Do not

expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

2

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.

f) If operating a power tools in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.

3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating

a power tool. Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention while

operating power tools may result in serious personal injury.

b) Use safety equipment. Always wear eye protection. Safety equipment such as

dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.

c) Avoid accidental starting. Ensure the switch is in the off position before

plugging in. Carrying power tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in
personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of these devices
can reduce dust related hazards.

h) Use auxiliary handle(s), if supplied with the tool. Loss of control can cause

personal injury

i) Hold power tool by insulated gripping surfaces, when performing an

operation where the cutting accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.

3

4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was
designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source before making any adjustments,

changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control;

g) Use the power tool, accessories and tool bits etc., in accordance with these

instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from intended could result in a
hazardous situation.

5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charter that is

suitable for one type of battery pack may create a risk of fire when used with another
battery pack.

b) Use power tools only with specifically designated battery packs. Use of any

other battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal objects, lie

paperclips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals

together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery; avoid

contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected form the battery may cause irritation

or burns.

6) Service

Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

4

SPECIAL SAFETY ADVICE FOR CORDLESS DRILL

Wear ear protectors with drills. Exposure to noise can cause hearing loss. Use auxiliary
handles supplied with the tool. Loss of control can cause personal injury.
Only plug the Battery Charger in at 230V or 120V mains. Recharge the Battery only with
the provided charger. Before starting any work on walls, floors or similar, make sure that
all power lines in the work area are switched off at the main switchboard. Inspect the
proposed drill hole location for any utility lines (e.g. water, gas, power) before drilling.
Use a suitable device such as a metal or electricity line detecting device. If in doubt
contact a qualified electrician or your utility provider. Both tools and work-pieces can heat
up considerably during the drilling operation. Allow a sufficient period of cooling before
handling. Wear appropriate gloves.

SAFERY ADVICE FOR RECHARGEABLE BATTERY AND CHARGER

a) Recharge only with the changer specified by the manufacture. A charger that

is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.

b) Use power tools only with specifically designated battery packs. Use of any

other battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal objects, like

paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection form one terminal to another. Shorting the battery terminal

together may cause burns or fire.

d) Under abusive conditions, liquid may be ejected from the battery; avoid

contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may

cause irritation or burns.

e) Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

5