Page 1
User guide
Profoto B10
Profoto B10 Plus
For other languages visit:
www.profoto.com/support
Page 2
Profoto B10,
Profoto B10 Plus
2
www.profoto.com
Page 3
Congratulations on your new Profoto product!
Regardless if you chose a new flash or a new light shaping tool, know
that almost half a century’s worth of experience was put into its making.
If the years have taught us one thing, it is to never neglect a single
detail. We only put our name on a product in which we have the fullest
confidence. Before shipping, every one of our products passes an
extensive and strict testing program. Unless it complies with the
specified performance, quality and safety, it is a no-go.
As a result, we are confident that your new Profoto product will stay
with you for years and help you grow as a photographer. But getting the
product is only the beginning of that journey. Using it for light shaping is
the real adventure. That is why we take pride in providing you with such
a wide assortment of light shaping tools, allowing you to shape the light
in any way you can imagine.
The almost infinite possibilities might seem bewildering at first, but
we’re certain you will soon get the hang of it.
I encourage you to sign up for our newsletter or visit Profoto stories,
www.profoto.com/profoto-stories, to learn more about shaping light
from photographers who are sharing their stories about how Profoto
Light Shaping Tools help them create outstanding images.
Enjoy your Profoto product!
Conny Dufgran, founder
Profoto B10,
Profoto B10 Plus
3
www.profoto.com
Page 4
NOTICE
General safety instructions
Safety Precautions!
Do not operate the equipment before studying the instruction manual carefully. Make sure that Profoto
Safety Instructions is always accompanied the equipment! Profoto products are intended for indoor
conditions use! Do not place or use the equipment where it can be exposed to moisture, extreme
electromagnetic fields, or in areas with flammable gases or dust! Do not expose the equipment to dripping
Profoto B10,
4
or splashing. Do not place any objects filled with liquids, such as vases, on or near the equipment. Do
Profoto B10 Plus
not expose the equipment to hasty temperature changes in humid conditions as this could lead to
condensation water in the unit. Do not connect this equipment to flash equipment from other brands. The
front lens shall be changed if it has become visibly damaged to such an extent that their effectiveness is
impaired, for example by cracks or deep scratches. Equipment must only be serviced, modified or repaired
by authorized and competent service personnel! Warning - The terminals marked with the flash symbol are
hazardous live. The charger mains cable and plug serve as the disconnect device from mains power. Always
disconnect the charger from the mains outlet by pulling the plug, not the cable. The socket outlet should be
in close proximity to the equipment and should be easily accessible.
WARNING – Electrical Shock Hazard – High Voltage!
Do not open or disassemble flashes, generators or lamp heads! Equipment operates with high voltage.
Generator capacitors are electrically charged for a considerable length of time after being turned off.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as direct
sunlight, fire, or the like.
Caution – Burn Hazard – Hot Parts!
If front lens cracks, it must be replaced before re-use of the equipment. Do not touch front lens during
operation, it may reach a high temperature.
Note about RF!
This equipment makes use of the radio spectrum and emits radio frequency energy. Make sure the
device is operated according to local regulations. The frequency spectrum this device is using is
shared with other users. Interference cannot be ruled out. Due to varying regulations and limits on radio
transmissions, Profoto B10/B10 Plus has a power output setting. Some countries do not allow the use of
the full power mode, please refer to your country specific section in the user guide to see the maximum
allowed power setting allowed by national regulations. Please note that reducing the power output will
affect the range of the device.
Final Disposal
When the product reaches end of service, do not dispose of it with your other household waste.
Equipment contains battery, electrical and electronic components that could be harmful to the
environment. Equipment may be returned to Profoto distributors free of charge for recycling. Follow
local legislation for disposal of batteries, electrical and electronic components, respectively.
www.profoto.com
Page 5
Table of Contents
General safety instructions .............................................................................................4
Nomenclature ..................................................................................................................... 7
Getting started .................................................................................................................. 10
Charge the battery .........................................................................................10
Check the battery status .............................................................................10
Mount the battery ............................................................................................11
Attach the stand adapter ..............................................................................12
Setup on light stands .................................................................................... 13
Setup on camera tripods ..............................................................................14
Mount Profoto Light Shaping Tools ......................................................... 15
Change front glass, flash tube and LED ................................................. 16
Basic operation..................................................................................................................17
Switch on/o ....................................................................................................17
Adjust the flash power ...................................................................................17
Adjust the continuous light ........................................................................ 18
Navigate the settings menu ...................................................................... 19
Menu settings .................................................................................................................. 20
Air group ...........................................................................................................20
Air channel .......................................................................................................20
Air ...................................................................................................................... 20
Bluetooth ......................................................................................................... 20
IR slave ...............................................................................................................21
Flash mode .......................................................................................................21
Continuous light .............................................................................................22
Advanced settings.........................................................................................22
Air operation ..................................................................................................................... 25
Trigger (Channel setup) ............................................................................... 25
Remote control (Group setup) .................................................................. 25
TTL ..................................................................................................................... 26
High-Speed Sync ......................................................................................... 26
Air compatibility overview .......................................................................... 26
General notes on Air operation .................................................................27
Profoto app connectivity ..............................................................................................27
Profoto B10,
Profoto B10 Plus
5
www.profoto.com
Page 6
Other ................................................................................................................................... 28
Battery storage .............................................................................................. 28
Overheat protection ..................................................................................... 28
Quick burst ...................................................................................................... 28
Firmware update ........................................................................................... 29
Profoto B10,
Profoto B10 Plus
Serial number ................................................................................................. 29
Technical data .................................................................................................................. 30
Warranty ............................................................................................................................. 34
Regulatory information ................................................................................................. 35
6
www.profoto.com
Page 7
Nomenclature
Profoto B10,
Profoto B10 Plus
1
7
3
1. Front glass
2. Zoom scale
3. Battery compartment
4. Alignment pin hole
2
4
5
6
7
5. Stand adapter attachment
point
6. Strap attachment point
7. USB-C port
www.profoto.com
Page 8
Profoto B10,
Profoto B10 Plus
8
8
9
8. IR-Slave eye
9. Display
10. Continuous light dial
15
14
13. Stand stud mount
14. Clamp screw
15. Umbrella holder
16. Tilt-lock knob
www.profoto.com
10
12
11
11. Main dial
12. Test button
19
18
17
16
13
17. Attachment screw wheel
18. Alignment pin
19. Attachment screw
Page 9
20
Profoto B10,
Profoto B10 Plus
21
20. Battery status button
21. Battery status LEDs
24
24. AC inlet
25. Strap
23
22
22. Battery charge connector
23. Battery release button
25
26
27
26. Charge status indicator
27. Battery connector plug
www.profoto.com
9
Page 10
Getting started
Charge the battery
The battery can be charged from any charge level. Only use the Profoto
charger supplied with the Profoto B10/B10 Plus or other chargers
recommended by Profoto.
1. Connect the battery connector plug [27] on the battery charger
Profoto B10,
Profoto B10 Plus
to the battery charge connector [22] on the battery.
2. Connect the battery charger to mains power.
10
3. Check that the charger indicator [26] is continuously amber,
indicating that charging is in progress.
4. When the charging is completed, the charger indicator [26] turns
green. When not charging it is recommended to disconnect the
battery charger from mains power and from the battery.
NOTE
• If the battery is deeply discharged, the charging time can be longer than specified
in section Technical data.
• Battery charger indicator blinking amber indicates battery error. Contact a Profoto
dealer for support.
Check the battery status
The battery charge can be checked on the battery itself by pressing the
Battery status button [20].
While the battery status button is pressed, the battery charge status is
indicated by the Battery status LEDs [21]:
5 LED: 75-100 %
4 LED: 50-75 %
3 LED: 25-50 %
2 LED: 10-25 %
1 LED: <10 %:
Once the Profoto B10/B10 Plus is turned on, the battery charge status
is indicated by the battery icon in the bottom right of the display
www.profoto.com
Page 11
[9]:
4 sections: 75-100 %
3 sections: 50-75 %
2 section: 25-50 %
1 section: 10-25 %
Empty frame: <10 %
Profoto B10,
Profoto B10 Plus
If the Profoto B10/B10 Plus is turned on and the battery is charged
during use, it will be indicated by a battery charge icon in the
bottom right of the display [9].
Mount the battery
1. To mount the battery, fit the battery into the Profoto B10/B10 Plus
unit as illustrated below and press firmly until you hear a “click”
sound, indicating that the battery is locked in place.
2. To dismount the battery, first, switch off the Profoto B10/B10 Plus
unit. Press the battery release button [23] and pull out the battery.
www.profoto.com
11
Page 12
Attach the stand adapter
Attach the stand adapter to the stand adapter attachment point [5] on
the Profoto B10/B10 Plus.
1. Before attaching, observe that the alignment pin [18] on the stand
adapter, fits into alignment pint hole [4] on the Profoto B10/B10
Plus.
Profoto B10,
Profoto B10 Plus
2. Tighten the attachment screw [19] with the attachment screw
wheel [17] until the stand adapter sits firm.
12
www.profoto.com
Page 13
Setup on light stands
Before mounting the Profoto B10/B10 Plus onto a light stand, you need
to attach the stand adapter. Once the stand adapter is attached, follow
the instruction below.
1. Mount the Stand stud mount [13] onto the stand stud and secure
with the Clamp screw [14].
2. Loosen the Tilt lock knob [16] to adjust the tilt position.
3. Tighten the Tilt lock knob [16] to lock the tilt position.
Profoto B10,
Profoto B10 Plus
13
www.profoto.com
Page 14
Setup on camera tripods
It is easy to mount the Profoto B10/B10 Plus onto any camera tripod
or ball head.
1. If the stand adapter is attached to the Profoto B10/B10 Plus, first
remove it.
2. Attach the tripod or ball head onto the stand adapter attachment
Profoto B10,
Profoto B10 Plus
point [5] on the Profoto B10/B10 Plus.
14
www.profoto.com
Page 15
Mount Profoto Light Shaping Tools
The Profoto B10/B10 Plus is compatible with more than Profoto 120
light shaping tools, which can be used to shape its already beautiful
light into almost any light you can imagine. Note that instructions
additional from those below may come with each light shaping tool.
Mount tools with standard reflector mount (rubber collar
with clasp)
Most reflectors are equipped with Profoto’s unique clamp mechanism.
This makes them easy to mount and allows you to shape the light by
simply sliding the reflector back and forth along the zoom scale [2] on
the Profoto B10/B10 Plus.
1. Unlock the clasp on the reflector.
2. Slide the reflector onto the front of the Profoto B10/B10 Plus. Use
the zoom scale [2] as a memo for where to position the reflector.
3. Secure the reflector by locking the clasp on the reflector.
Profoto B10,
Profoto B10 Plus
15
www.profoto.com
Page 16
Mount umbrellas
The umbrella holder is integrated into the stand adapter. Umbrellas are
easily mounted by sliding the umbrella shaft into the umbrella holder
[15]. The umbrella shaft diameter must be between 7 mm and 8 mm to
fit into the umbrella holder.
1. Mount the stand adapter on the Profoto B10/B10 Plus.
Profoto B10,
Profoto B10 Plus
2. Slide the umbrella shaft into the umbrella holder [15] passing the
point where you feel some friction.
3. Continue to slide the umbrella shaft into the umbrella holder [15]
16
until the umbrella is positioned where you want it.
Change front glass, flash tube and LED
Replacement of the front glass, flash tube, or continuous light LED
can only be performed by a service technician. Contact your nearest
Profoto dealer or distributor for professional service.
www.profoto.com
Page 17
Basic operation
Switch on/off
1. To switch on the unit, press and hold the Test button [12].
2. To switch off the unit, press and hold the Test button [12].
When the Profoto B10/B10 Plus is switched off, the current settings are
stored and will apply when the unit is switched on again.
NOTE
To save battery, the Profoto B10/B10 Plus automatically enters standby mode and/
or switches off completely after a period of inactivity. The periods of inactivity for the
standby and auto power off functions are selectable via the settings menu.
Adjust the flash power
The flash power setting (light output) is shown in big bold numbers on
the display [9]. The power scale is a relative f-stop scale from 1.0-10. The
maximum light output is shown as 10.
Use the Main dial [11] to change the flash light output:
• Turn the Main dial [11] to change the light output in 1/10 f-stop
increments.
• Press and turn the Main dial [11] to change the light output in 1
f-stop increments.
• Press the Test button [12] to release a test flash.
Profoto B10,
Profoto B10 Plus
17
www.profoto.com
Page 18
Adjust the continuous light
The continuous light can be set to FREE (factory setting) or
PROPORTIONAL in the settings menu.
1. When set to FREE the continuous light brightness can be
adjusted separately from the flash power.
2. When set to PROPORTIONAL the continuous light brightness is
Profoto B10,
Profoto B10 Plus
always proportional to the flash power.
Adjusting continuous light when it is set to FREE
18
1. Press the Continuous light dial [10] to turn the continuous light
on or off.
2. When the continuous light is on, the brightness and color
temperature is indicated in the display [9] by two separate bars as
shown below.
3. Turn the Continuous light dial [10] to change the brightness.
4. Press and turn the Continuous light dial [10] to change the color
temperature.
www.profoto.com
Page 19
Adjusting continuous light when it is set to PROPORTIONAL
1. Press the Continuous light dial [10] to turn the continuous light
on or off.
2. When the continuous light is on, the brightness and color
temperature is indicated in the display [9] as shown below.
3. Turn the Main dial [11] to change the intensity (this will change
both flash and continuous light proportionally).
4. Turn the continuous light dial [10] to change the color
temperature.
Navigate the settings menu
All Profoto B10/B10 Plus settings are accessed and selected through
the settings menu.
1. Press the Main dial [11] to enter the settings menu.
Profoto B10,
Profoto B10 Plus
19
2. Scroll through the settings menu by turning the Main dial [11].
3. To change a setting, press the main dial [11]. For some settings, a
sub menu will appear.
4. To return to the previous menu, press the Continuous light
dial[10] or select the left arrow symbol at the top of the menu.
5. To return to the main screen, press the Test button [12].
www.profoto.com
Page 20
Menu settings
All settings listed below are accessed through the settings menu.
Air group
The AIR GROUP setting is used to select the group (A-F) for wireless
control via Profoto Air. See also section Air operation. Factory default
Profoto B10,
Profoto B10 Plus
setting is group A.
NOTE
The AIR GROUP setting is only selectable when AIR is set ON.
20
Air channel
The AIR CHANNEL setting is used to select the channel (1-8) for
wireless triggering via Profoto Air. Factory default setting is channel 1.
See also section Air operation.
NOTE
The AIR CHANNEL setting is only selectable when AIR is set ON.
Air
The AIR setting can be set to ON or OFF to activate or deactivate
Profoto Air wireless functionality. When Air is deactivated, “AIR OFF” is
shown at the bottom left of the display [9]. When Air is activated, the set
channel and group, ex “1 A” is shown at the bottom left of the display [9].
NOTE
If AIR is ON channel and group must also be selected. For additional guidance how to
set up Air, see the section “Air operation”.
Bluetooth
The BLUETOOTH setting is used to manage connectivity with the
Profoto app. See also section Profoto app connectivity.
• DISCOVERABLE: Select ON to make the Profoto B10/B10 Plus
discoverable and OFF to deactivate Bluetooth. When Bluetooth
is activated, a Bluetooth icon is shown at the bottom of the main
screen of the display [9].
www.profoto.com
Page 21
• DISCONNECT: This is only selectable if the Bluetooth is
activated and connected to the Profoto app. Can be selected
to force disconnection from the Profoto app without turning off
Bluetooth.
IR slave
The IR SLAVE setting can be set to ON or OFF to activate or deactivate
the infrared slave sensor. Factory default setting is OFF.
NOTE
It is highly recommended to set IR SLAVE to OFF if other methods of triggering (e.g
AIR) is used.
Flash mode
The FLASH MODE setting adjusts the flash duration and color
temperature on the flash across the full power range. There are two
selectable settings, NORMAL and FREEZE. Factory default setting is
NORMAL.
• NORMAL: Optimized for consistent color temperature across the
full flash power range. NORMAL is the best flash mode for most
types of shots.
• FREEZE: Optimized for shortest flash duration across the full
flash power range. FREEZE is the best option for shots where the
flash is used to freeze fast action. When FREEZE is activated a
FREEZE indication shown on the main screen.
NOTE
The flash mode setting is only relevant when using the flash at shutter speeds within
the camera X-sync range. When shooting at shorter shutter speeds with High-Speed
Sync, there is not difference between the two settings.
Profoto B10,
Profoto B10 Plus
21
See an overview of the flash duration and color temperature in NORMAL vs FREEZE
mode in the Specification section of this user guide.
www.profoto.com
Page 22
Continuous light
The CONTINUOUS LIGHT setting defines how the continuous light
intensity is adjusted. There are two selectable settings, PROP and
FREE. Factory default setting is FREE.
• PROP: The continuous light intensity is always proportional
to the flash power setting. This setting is recommended if the
Profoto B10,
Profoto B10 Plus
continuous light is used as modeling light.
• FREE: The continuous light intensity can be set independent
22
from the flash power setting. This setting is recommended if the
continuous light is used as video light.
NOTE
For instructions on how to adjust the continuous light when either PROP or FREE is
selected, go to the section “Adjust the continuous light”.
Advanced settings
Ready signal
The READY SIGNAL setting sets how the Profoto B10/B10 Plus
indicates that it is fully recycled after a flash and is ready to flash again.
There are four selectable settings:
• SOUND: The Profoto B10/B10 Plus beeps when it has recycled
and is ready to flash.
• DIM: The continuous light turns off after flashing and turns on
when the Profoto B10/B10 Plus has recycled and is ready to flash.
• SOUND & DIM: The Profoto B10/B10 Plus signals with both
SOUND and DIM.
• OFF: The Profoto B10/B10 Plus doesn´t signal that it is ready to
flash. This is the factory default setting.
NOTE
The test button [12] always comes off after flashing and comes on again when the
Profoto B10/B10 Plus is fully recycled. The Profoto B10/B10 Plus will always flash even
when not fully recycled but the flash power might then be lower than the set flash power.
www.profoto.com
Page 23
Control sounds
The CONTROL SOUNDS setting can be set to ON or OFF to enable/
disable tactile sounds for control knobs and buttons. Factory default
setting is ON.
Exposure warning
The EXPOSURE WARNING setting can be set to ON or OFF to enable/
disable a warning sound for wrong exposure if a flash is fired before the
Profoto B10/B10 Plus has recycled. Exposure warning is also issued
if the requested flash energy is out-of-range while using TTL. Factory
default setting is OFF.
NOTE
Regardless of EXPOSURE WARNING setting, a yellow EXP symbol will appear on the
main screen to warn if the flash cannot fire at set power.
Display brightness
The DISPLAY BRIGHTNESS setting is used to set display brightness.
There are four selectable settings:
• AUTO: The display brightness is automatically adjusted based on
the ambient lighting. This is the factory default setting.
• MAX
• MEDIUM
• LOW
Standby
The STANDBY setting sets a timer for a period of inactivity until the
Profoto B10/B10 Plus goes into standby mode to save battery. There
are four selectable settings:
• 5 MIN: The Profoto B10/B10 Plus goes into standby mode after 5
minutes of inactivity.
• 30 MIN: The Profoto B10/B10 Plus goes into standby mode after
30 minutes of inactivity. This is the factory default setting.
• 1 HOUR: The Profoto B10/B10 Plus goes into standby mode after
1 hour of inactivity.
• NEVER: The Profoto B10/B10 Plus never goes into standby
mode.
www.profoto.com
Profoto B10,
Profoto B10 Plus
23
Page 24
Auto off
The AUTO OFF setting sets a timer for a period of inactivity until the
Profoto B10/B10 Plus turns off to save battery.
There are three selectable settings:
• 15 MIN: The Profoto B10/B10 Plus turns off after 15 minutes of
Profoto B10,
Profoto B10 Plus
inactivity.
• 1 HOUR: The Profoto B10/B10 Plus turns off after 1 hour of
24
inactivity. This is the factory default setting.
• NEVER: The Profoto B10/B10 Plus never turns off automatically.
NOTE
If both the STANDBY and AUTO OFF functions are deactivated, the battery will drain in
approx. 8 hours of inactive use.
About
The ABOUT section displays unit specific information about the serial
number, hardware, and installed firmware.
Factory reset
FACTORY RESET will reset all settings to factory default settings.
www.profoto.com
Page 25
Air operation
Trigger (Channel setup)
The Profoto B10/B10 Plus has AirTTL built-in which means it can be
wirelessly triggered and remote controlled from any Profoto Air remote
or from the Profoto A1. The Profoto B10/B10 Plus also fully supports
AirTTL and High Speed Sync if this is supported by your Air remote and/
or camera. The basic trigger setup is very easy in three simple steps and
requires no linking between units.
1. Activate Air on the Profoto B10/B10 Plus by selecting AIR ON in
the Settings menu.
2. Turn on your Air Remote.
3. Select the same AIR CHANNEL (1-20) on your Air Remote and on
your Profoto B10/B10 Plus.
NOTE
All flashes on the same AIR CHANNEL will always trigger together, regardless of AIR
GROUP setting. Channel 1-8 can be set on all Profoto Remotes. Channel 9-20 can only
be set in selected Profoto Remotes.
Remote control (Group setup)
Remote controlling the Profoto B10/B10 Plus from an Air Remote or
a Profoto A1 is almost as easy as triggering and requires no linking
between units.
1. Perform the CHANNEL setup.
2. Select AIR GROUP (A-F) on the Profoto B10/B10 Plus.
3. Select the same GROUP on your AIR remote.
NOTE
If you are using more than one light off camera you can set them into different groups
to enable individual remote control. For detailed operating instructions, check the user
guide for your Air Remote or Profoto A1.
Profoto B10,
Profoto B10 Plus
25
www.profoto.com
Page 26
TTL
TTL requires no additional setup on the Profoto B10/B10 Plus once
the Air channel and group setup is done. Just switch between TTL or
Manual (MAN) on your Air Remote or Profoto A1 to select if you want to
let the Profoto B10/B10 Plus adjust the light automatically (TTL) or if
you want to control it manually (MAN). All lights keep the flash power
Profoto B10,
Profoto B10 Plus
set by TTL when you switch to manual. This makes it easy to use TTL as
your “light meter” to get a good starting point for manual adjustments.
This is sometimes referred to as “hybrid mode”.
26
NOTE
For detailed operating instructions, check the user guide for your Air Remote or Profoto
A1.
High-Speed Sync
High-Speed Sync requires no additional setup on the Profoto B10/
B10 Plus once the Air channel and group setup is done. For detailed
operating instructions, check the user guide for your Air Remote or
Profoto A1.
Air compatibility overview
The table below shows all Profoto Air transmitters compatible with
the Profoto B10/B10 Plus in June 2019 .
Optional Profoto
Air transmitters
Profoto A1 X X X X
Profoto Connect X X X X
Air Remote TTL X X X X
Air Remote X X
Air Sync X
Usable features in combination with
Profoto B10/B10 Plus
Flash sync Remote
control
TTL High-Speed
Sync
www.profoto.com
Page 27
General notes on Air operation
Profoto Air has a wireless operating range of 0.5-300 metres
(1.5-1000 ft). For best wireless performance please consider the
following.
• Maintain line of sight between the Profoto Air “on camera transmitter” and the off-camera flash unit whenever possible.
• When hiding the off-camera flash from view, try to not hide it
behind or against metal or water-filled objects as this will affect
the radio range.
• If you experience missing triggers at a relative close range, try
switching to another Air channel.
• Minimum recommended operating distance between the
on-camera transmitter and off-camera flash is 50cm/20inch.
Profoto app connectivity
It´s easy to connect the Profoto B10/B10 Plus with the Profoto app
and once you are connected it is even easier and more fun to use the
Profoto B10/B10 Plus. The Profoto app gives you all in one access to:
• Easy updates
Always have the latest Profoto B10/B10 Plus updates available at
your fingertips.
• Smart remote control
View and control all Profoto B10/B10 Plus settings from your
smartphone screen.
• Creative capture
Play with light and shadows to create amazing smartphone
images lit with your Profoto B10/B10 Plus.
As of June 2019, the Profoto app is only available for Apple iOS.
Go to Apple app Store to download the App.
Profoto B10,
Profoto B10 Plus
27
To connect the Profoto app to the Profoto B10/B10 Plus you need to
select BLUETOOTH AVAILABLE in the settings menu on the Profoto
B10/B10 Plus. Then start the Profoto app and follow the in-app
instructions.
www.profoto.com
Page 28
Other
Battery storage
If the battery is to be stored for a longer period, it should be charged
half-full before storage. Never store an empty battery for a longer
period, as it may go into a deep discharge state that can damage the
battery cells. After storing a battery for more than 6 months without
Profoto B10,
Profoto B10 Plus
using it, it is advised to check the charge level on the battery. If less
than 2 of the battery status LEDs [21] lits up, the battery should again
be charged to half-full before further storage.
28
Overheat protection
A temperature limit indicator is shown on the main screen of the display
[9] if the Profoto B10/B10 Plus has reached a temperature level that
has activated the built-in overheat protection. When this occurs,
the performance is limited until the temperature level is back to an
acceptable level.
Quick burst
Quick burst is an automatically activated function that allows a series
(burst) of flashes to be fired at a faster pace than the Profoto B10/B10
Plus can recycle. The function is only active when the light output is set
to less than full. The length of the burst, in numbers of flashes, depends
on the repetition rate and the set light output. The lower the light output
is set, the longer bursts can be triggered. Thanks to this feature, the
Profoto B10/B10 Plus can trigger up to 20 flashes per second on lower
power output without losing light after the first flash. Note that the
accuracy of the light output is slightly less precise when Quick burst
is active.
www.profoto.com
Page 29
Firmware update
We highly recommend that you look for firmware updates before you
start using your new Profoto B10/B10 Plus.
The easiest way to register and update the Profoto B10/B10 Plus
is through the Profoto app. You can also register at profoto.com/
myprofoto and download the latest updates for Mac or PC. Upgrading
from a Mac or PC is done via USB-cable to the USB-C port [7] on
the Profoto B10/B10 Plus. Switch the Profoto B10/B10 Plus off and
connect the USB-C cable. After uploading new firmware, disconnect
the cable before switching on the Profoto B10/B10 Plus. The startup
may be delayed for about 10 seconds when a new firmware has been
downloaded. If you experience problems with upgrading you can
always contact your local dealer or distributor for professional service.
Serial number
The serial number is printed on the Profoto B10/B10 Plus unit,
underneath the battery pack. You can also find the serial number in the
display[9] under SETTINGS>ADVANCED>ABOUT.
Profoto B10,
Profoto B10 Plus
29
www.profoto.com
Page 30
Technical data
Flash Profoto B10 Profoto B10 Plus
Max flash energy 250Ws 500Ws
Flash power range 1.0-10 (10 f-stop) 1.0-10 (10 f-stop)
Flash recycle time 0.05-2 sec 0.05-2.5 sec
Profoto B10,
Profoto B10 Plus
Flash power stability ±0.1 f-stop ±0.1 f-stop
Flash duration, Normal
mode
30
Flash duration, Freeze
mode
Continuous light
Continuous light type LED
Continuous light max
output lumens
Continuous light color
temperature
Continuous light CRI
(Color rendering index)
Battery
Battery type Li-Ion, 14.4 Vdc, 43.2 Wh/3.0Ah
Battery flash capacity
(no of flashes)
Max battery
continuous light
capacity
Battery charging time Up to 90 minutes
See separate table See separate
table
See separate table See separate
table
2500 lumens
3000K-6500K ±500K
90-96
Profoto B10: Up to 400 full power flashes
Profoto B10 Plus: Up to 200 full power
flashes
Up to 75 minutes
www.profoto.com
Page 31
Synchronization and
Control
Profoto Air sync &
control
Yes, AirTTL receiver built-in. Transmitters
sold separately.
Smartphone control Yes via Bluetooth through Profoto app
Photocell/IR-slave Yes
Radio Frequency Specifications
Profoto Air 2.4 GHz
Frequency Band 2.4 GHz (2404 to 2479.3 MHz)
Radio Power Output Maximum 19.9 dBm
(China max. 9.9 dBm)
Bluetooth low energy technology
Frequency band 2.4 GHz (2404 to 2479.3 MHz)
No of frequency
40
channels
Radio Power Output Maximum 8 dBm
Miscellaneous
Function display Multifunction LCD display
Auto dumping Yes
Firmware update Via Bluetooth from Profoto app or
through via USB-C from Windows PC or
MAC
Auto standby Yes, selectable
Auto power off Yes, selectable
Measurements Profoto B10 Profoto B10 Plus
Diameter 10 cm/3.9 “ 10 cm/3.9 “
Length 17.5 cm/6.9 “ 23.5 cm/9.3“
Weight excluding
1.3 kg/2.8 lbs 1.7 kg/3.7 lbs
Stand adapter
All technical data are to be considered as nominal and Profoto reserves
the right to make changes without further notice.
Profoto B10,
Profoto B10 Plus
31
www.profoto.com
Page 32
Profoto B10 Normal mode Freeze mode
Flash duration Flash duration
Energy
(scale)
10.0 250 1/400 1/1300 1/400 1/1300
Profoto B10,
Profoto B10 Plus
9.0 125 1/650 1/1400 1/1500 1/1800
8.0 62.5 1/1000 1/1500 1/2800 1/4100
32
7.0 32 1/1400 1/1600 1/4300 1/8000
6.0 15 1/1800 1/2100 1/5800 1/13000
5.0 8 1/2100 1/2700 1/7700 1/17000
4.0 4 1/2600 1/3300 1/9900 1/19000
3.0 2 1/2800 1/3700 1/12000 1/25000
2.0 1 1/3300 1/4600 1/15000 1/50000
1.0 0.5 1/4900 1/7000 1/14000 1/42000
Energy
(Ws)
t0.1(s) t0.5(s) t 0.1(s) t0.5(s)
www.profoto.com
Page 33
Profoto B10 Plus Normal mode Freeze mode
Flash duration Flash duration
Energy
(scale)
10.0 500 1/390 1/1200 1/390 1/1200
9.0 250 1/500 1/1300 1/1200 1/1700
8.0 125 1/800 1/1400 1/2200 1/4000
7.0 62.5 1/1300 1/1500 1/3500 1/6000
6.0 32 1/1600 1/1600 1/5000 1/8000
5.0 15 1/1900 1/2400 1/6400 1/11000
4.0 8 1/2300 1/3000 1/7900 1/14000
3.0 2 1/2700 1/3600 1/9400 1/20000
2.0 1 1/3400 1/4800 1/12000 1/25000
1.0 0.5 1/4100 1/6000 1/14000 1/35000
Energy
(Ws)
t0.1(s) t0.5(s) t 0.1(s) t0.5(s)
Profoto B10,
Profoto B10 Plus
33
www.profoto.com
Page 34
Warranty
All generators, heads and remote controllers manufactured by or for
Profoto which bear the Profoto trademark, name or logo are individually
tested before they leave the company and guaranteed for a period of
two years with the exceptions set out in Warranty terms. If you have
any technical problems with the product, please get in contact with an
Profoto B10,
Profoto B10 Plus
authorized Profoto service station.
34
www.profoto.com
Page 35
Regulatory information
World-wide Usage of Radio Spectrum
The Profoto Air system operates on the license-free 2.4GHz ISM band
for SRD (Short Range Devices). This band may be used in most parts
of the world. Regional restrictions may apply.
NOTE
Refer to national regulations for the region where the Profoto B10/B10 Plus AirTTL shall
be operated and make sure that they are followed.
EU Declaration of Conformity
Hereby, Profoto AB declares that the radio equipment type Profoto
B10/B10 Plus AirTTL is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
https://profoto.com/se/support/declaration-of-conformity
RF Power
In order to remain compliant with national regulations and restrictions,
please use the following RF POWER settings while operating your
Profoto B10/B10 Plus in these countries. Please note that these are
subject to change and you may find updated information available for
download at Profoto.com
COUNTRY RF POWER
USA/Canada 2
EU (and EES) 2
South Korea 4
China, Taiwan 2
Japan 1
To to enter the RF POWER settings, go to SETTINGS>ADVANCED>
ABOUT and press and hold button 10 and 11.
Profoto B10,
Profoto B10 Plus
35
www.profoto.com
Page 36
Unites States and Canada
F.C.C. and Industry Canada
Compliance Statement (Part 15.19) This device complies with Part 15 of
FCC rules and RSS-210 of Industry Canada. The operation is subject to
the following two conditions:
Profoto B10,
Profoto B10 Plus
1) this device may not cause harmful interference and,
2) this device must accept any interference received, including
interference that may cause undesired operation.
36
Warning (Part 15.21)
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Ce dispositif est conforme aux normes RSS-210 d’Industrie Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions
suivantes :
1) il ne doit pas produire de brouillage et
2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
The term ‘IC’ before the certification/registration number only signifies
that the Industry Canada technical specifications were met.
Les lettres ‘IC’ n’ont aucune autre signification ni aucun autre but
que d’identifier ce qui suit comme le numéro de certification/
d’enregistrement d’Industrie Canada.
Profoto AB
Transmitter / Receiver
MODEL: Profoto B10/B10 Plus AirTTL
PRODUCT NO: PCA1444-000
FCC ID: W4G-RMI6, QOQBGM12LMA
IC: 8167A-RMI6, 5123A-BGM12LMA
Made in Sweden
www.profoto.com
Page 37
South Korea
Taiwan
Japan
The module has been granted modular approval for sale and operation
in Japan.
Classification of specified radio equipment:
Article 2, Clause 1, Item 19
2.4 GHz Wide Band Low Power Data Communication
38 24 1
This is to certify that the above-mentioned certification by type has
been granted in accordance with the provisions of Article 38-24,
Paragraph 1 of the Radio Law.
Profoto B10,
Profoto B10 Plus
37
202-LSF011
R 209-J00226
www.profoto.com
Page 38
Credit
Apple iPhone is a trademark of Apple Inc., registered in the U.S. and
other countries.
The Bluetooth® word mark and logos are registered trademarks owned
by the Bluetooth SIG, Inc. and any use of such marks by Profoto is
Profoto B10,
Profoto B10 Plus
under license. Other trademarks and trade names are those of their
respective owners.
38
www.profoto.com
Page 39
Page 40
Profoto AB
Sweden
+46 (0) 8 447 53 00
info@profoto.com
www.profoto.com
104265. June 2019 Printed in Sweden.
Technical data and product information are subject to change without notice.
Loading...