7
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
7
Model No. PFVB2907.0
Serial No.
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete customer
satisfaction. If you have questions,
or if parts are damaged or missing,
PLEASE DO NOT CONTACT THE
STORE; please contact Customer
Care.
USER’S MANUAL
IMPORTANT: You must note the
product model number and serial
number (see the drawing above)
before contacting us:
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
www.proformservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manu
al for future reference.
-
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
I
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OW TO USE THE VIBRATION PLATFORM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
H
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
The warning decal shown here has been applied
in the location shown. If the decal is missing or
illegible, call the telephone number on the
front cover of this manual and request a free
replacement decal. Apply the decal in the
location shown. Note: The decal may not be
shown at actual size.
PROFORM is a registered trademark of ICON IP
2
, Inc.
IMPORTANT PRECAUTIONS
WARNING:To reduce the risk of serious injury, read all important precautions and
nstructions in this manual and all warnings on your vibration platform before using your vibration
i
platform. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the vibration platform are
adequately informed of all precautions.
3. Your vibration platform is intended for home
use only. Do not use your vibration platform
in a commercial, rental, or institutional setting.
4. Keep your vibration platform indoors, away
from moisture and dust. Place your vibration
platform on a level surface, with a mat
beneath it to protect the floor or carpet. Do
not place the vibration platform in a garage
or covered patio, or near water.
5. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from your vibration platform at all times.
7. Your vibration platform should not be used
by persons weighing more than 250 lbs.
(113 kg).
12. The following is a list of factors and conditions that may make exercising on the vibration platform inadvisable (this list is not
exhaustive; it is intended only for reference).
If one or more factors or conditions apply to
you, consult your physician before using the
vibration platform.
• Knee or hip implant
• Pacemaker
• Recently placed screws, pins, bolts, or
spirals
• Acute hernia, discopathy, or spondylitis
• Serious heart or vascular disease
• Acute thrombosis
• Tumor
• Serious migraine
• Epilepsy
• Serious diabetes
• Recent wound due to operation
• Fresh inflammation
• Pregnancy
13. If you feel pain or dizziness while exercising,
stop immediately and cool down.
14. Use your vibration platform only as
described in this manual.
When connecting the power cord, follow the
15.
instructions on page 7.
8. Never allow more than one person on the
vibration platform at a time.
9. Keep your back straight while using your
vibration platform; do not arch your back.
When standing on the vibration platform,
bend your knees slightly and balance your
weight on the balls of your feet.
10. It is recommended that you use the vibration
platform no more than 15 minutes per day
and no more than 3 times per week.
11. Be careful when stepping down from the
vibration platform; your muscles will feel dif
ferent after you exercise on the vibration
platform.
16. Do not modify the power cord or use an
adapter to connect the power cord to an
improper receptacle. Keep the power cord
away from heated surfaces.
17. Never leave the vibration platform unattended while it is running.
DANGER:Always unplug the power
18.
cord when the vibration platform is not in
use and before cleaning the vibration platform. Servicing other than the procedures in
this manual should be performed by an
authorized service representative only.
-
3
BEFORE YOU BEGIN
7
Thank you for selecting the revolutionary PROFORM
IOVIBE vibration platform. The vibration platform
B
offers whole body vibration options that will make your
workouts effective and enjoyable.
For your benefit, read this manual carefully before
you use the vibration platform. If you have ques-
tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the
product model number and serial number before contacting us. The model number and the location of the
Left Handlebar
®
serial number decal are shown on the front cover of
his manual.
t
To avoid a registration fee for any service needed
under warranty, you must register the vibration
platform at www.proformservice.com/registration.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Right Handlebar
Handlebar Frame
Knob
Adapter
Control
Front Post
Mat
Casing
4
ASSEMBLY
7
Place all parts of the vibration platform in a cleared area and remove the packing materials. Do not dispose of
he packing materials until assembly is completed.
t
1. Lift the Handlebar Frame (28) and the Front
Post (26) to the position shown. Attach the
andlebar Frame to the Bottom Frame (18) with
H
the two M8 Knobs (27). Then, insert the Control
(54) into the Control Holder (32).
1
54
32
26
28
27
27
18
2. Attach the Left Handlebar (36) to the Handlebar
Frame (28) with two M8 x 16mm Screws (6) and
two M8 Arc Washers (31).
Attach the Right Handlebar (37) to the
Handlebar Frame (28) in the same way.
2
36
37
31
6
31
28
5
7
3. Plug the Adapter (24) into the indicated jack.
7
ake sure that all parts of the vibration plat-
M
form are properly tightened.
3
4
2
Jack
MAINTENANCE
Make sure that all parts are properly tightened each time you use the vibration platform. Replace any worn parts
immediately. Outer surfaces of the vibration platform can be cleaned with a damp cloth and a mild, non-abrasive
detergent; do not use solvents to clean the vibration platform.
STORING THE VIBRATION PLATFORM
To store the vibration platform, unplug the Adapter
(not shown). Next, remove the two M8 Knobs (27)
from the Handlebar Frame (28). Then, lower the
Handlebar Frame and the Front Post (26).
27
26
28
27
6
HOW TO USE THE VIBRATION PLATFORM
DIAGRAM OF THE CONTROL
A
C
E
other end of the adapter into an appropriate outlet that
is properly installed in accordance with all local codes
and ordinances.
HOW TO TURN ON THE POWER
IMPORTANT: If the vibration platform has been
exposed to cold temperatures, allow it to warm to
room temperature before turning on the power. If
B
D
F
you do not do this, the electronic components
may become damaged.
Plug in the adapter as described above. Next, press
the On/Off button on the control. The power indicator
will light and the vibration platform will begin to
vibrate.
cally turn off after 10 minutes.
HOW TO CHANGE THE VIBRATION FREQUENCY
When the power is turned on, the lowest vibration frequency will be selected and the lowest frequency indicator will light. If a different vibration frequency is
desired, press the High or Low button repeatedly until
the desired vibration frequency indicator lights.
Note: The vibration platform will automati-
A. On/Off Button—This button turns the power on
and off.
B. Power Indicator—This indicator lights when the
power is on.
C. Auto Button—This button selects the three auto
modes that automatically change the vibration frequency
Auto Indicator—This indicator shows which auto
D.
mode is selected.
E. Frequency Indicators—These indicators show
which of the five vibration frequencies is selected.
High and Low Buttons—These buttons increase
.
F
and decrease the vibration frequency.
HOW T
.
O PLUG IN THE ADAPTER
HOW TO USE THE AUTO MODES
Press the Auto button repeatedly to select one of the
three auto modes. The Auto indicator will light to show
which auto mode is selected.
When the first mode is selected, the third, fourth, and
fifth vibration frequencies will be selected in a repetitive
sequence.
When the second mode is selected, the first, second,
third, fourth, and fifth vibration frequencies will be
selected in a repetitive sequence.
When the third mode is selected, the second, third,
and fourth vibration frequencies will be selected in a
repetitive sequence.
HOW T
To turn off the power, press the On/Off button. The
power indicator will darken. Unplug the adapter
when the vibration platform is not in use.
CONTROL TROUBLESHOOTING
O TURN OFF THE POWER
Plug one end of the included adapter into the vibration
platform (see assembly step 3 on page 6). Plug the
If the control does not function properly, make sure
that the adapter is fully plugged into a 120-volt outlet.
7
NOTES
8
NOTES
9
PART LIST—Model No. PFVB2907.0 R
Key No. Qty. Description Key No. Qty. Description
1107A
1 1 Mat
2 4 M8 x 60mm Bolt
3
4 10 M8 Flat Washer
5 1 Casing
6 12 M8 x 16mm Screw
7 12 M4.2 x 13mm Self-tapping Screw
8 4 Cable Tie
9 1 Vibration Frame
10 18 M4.2 x 16mm Self-tapping Screw
11 2 Flat Block
12 2 Bushing
13 4 M8 Nylon Locknut
14 1 Motor Cover
15 1 Motor
16 4 Damping Mat
17 1 13mm x 12mm Endcap
18 1 Bottom Frame
19 6 Small Foot
20 2 M6 x 12mm Screw
21 1 Bottom Cover
22 3 M2.2 x 6.5mm Self-tapping Screw
23 1 Connector Board
24 1 Adapter
25 2 Upright Endcap
26 1 Front Post
27 2 M8 Knob
28 1 Handlebar Frame
13 M8 Spring Washer
29 2 Handlebar Frame Cover
30 2 M8 x 25mm Screw
1 4 M8 Arc Washer
3
32 1 Control Holder
33 2 M3.5 x 32mm Self-tapping Screw
34 1 Motor Pad
35 2 Handlebar Cover
36 1 Left Handlebar
37 1 Right Handlebar
38 2 Handlebar Endcap
39 1 Motor Base
40 1 Front Post Cover
41 1 M8 Nut
42 1 Front Post Pad
43 – (not used)
44 – (not used)
45 – (not used)
46 – (not used)
47 – (not used)
48 – (not used)
49 1 Control Cord Pad
50 1 Front Post Endcap
51 1 M8 x 60mm Bolt
52 4 Casing Pad
53 1 Front Post Clamp
54 1 Control
* – User’s Manual
* – Tool
Note: Specifications are subject to change without notice. See the back cover of this manual for information about
ordering replacement parts. *These parts are not illustrated.
10
EXPLODED DRAWING—Model No. PFVB2907.0 R1107A
1
2
2
3
3
4
4
5
6
6
3
3
9
10
10
10
11
20
15
11
20
39
4
4
13
13
14
21
23
22
40
16
16
16
18
10
19
10
10
10
10
7
19
10
6
6
6
6
19
3
3
3
3
19
8
7
19
51
4
4
41
3
24
50
26
17
30
32
33
12
12
10
29
25
25
27
27
28
29
10
6
31
31
6
31
36
35
38
54
35
37
38
7
7
7
8
7
34
42
52
5
2
8
7
53
49
11
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’s responsibility. For
in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center; products used
for commercial or rental purposes; or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
-
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 260571 R1
107A
Printed in China
© 2007 ICON IP, Inc.
Loading...