Quick Reference Guide
P7000, P7000HD, and P7000 H-Series
Cartridge Ribbon Printers
NOTICE
This Quick Reference Guide contains a
CD-ROM with the following materials:
• The User’s Manual
• Programmer’s Reference Manuals
• Useful utility programs
The CD-ROM is in a plastic pocket in
the back cover.
Save this guide. If you move or pack
the printer in the future, you will need to
reverse the instructions in this guide.
This document contains proprietary information protected by
copyright. No part of this document may be reproduced, copied,
translated, or incorporated in any other material in any form or by
any means, whether manual, graphic, electronic, mechanical, or
otherwise, without the prior written consent of Printronix.
Printronix makes no representations or warranties of any kind
regarding this material, including, but not limited to, implied
warranties of merchantability and fitness for a particular purpose.
Printronix shall not be held responsible for errors contained herein
or any omissions from this material or for any damages, whether
direct or indirect, incidental or consequential, in connection with the
furnishing, distribution, performance, or use of this material. The
information in this manual is subject to change without notice.
COPYRIGHT 2010 PRINTRONIX, INC.
Table of Contents
P7000 Cartridge Ribbon Printer Control Panel ....................7
P7000 H-Series Cartridge Ribbon Printer Control Panel .....7
Loading Ribbon Cartridge And Paper ..................................8
Loading Ribbon Cartridge ...............................................8
Loading Paper (Standard Configuration) ......................11
Set The Top-Of-Form .........................................................17
Clearing Paper Jams..........................................................20
Most Frequent Problems and Solutions .............................25
Contact Information ............................................................26
Printronix Customer Support Center .............................26
Printronix Supplies Department ....................................27
Corporate Offices ..........................................................27
For More Information..........................................................28
Notices ...............................................................................29
5
Table of Contents
6
P7000 Cartridge Ribbon Printer Control Panel
PRT CONFIG
ENTER
ON LINE/CLEAR
SET TOF
PAPER ADVANCE
JOB SELECT
183452b
CANCEL
VIEW/EJECT
P7000 H-Series Cartridge Ribbon Printer Control Panel
PRT CONFIG
SET TOF
JOB SELECT/
PRINT MODE
ENTER
ON LINE/CLEAR
183452b
CANCEL
VIEW/EJECT
PAPER ADVANCE
7
Loading Ribbon Cartridge And Paper
Loading Ribbon Cartridge And Paper
The following sections describe how to install ribbon and load
paper.
Loading Ribbon Cartridge
Blue Tractor
Door (2)
TOF
TOF
Figure 1. Preparing to Load the Ribbon Cartridge
1. Make sure the printer cover is open.
2. Raise the platen lever as far as it will go.
3. Close the tractor doors.
183816a
Platen Lever
8
Tab (2)
Loading Ribbon Cartridge
Ribbon
Ribbon
Cartridge
Ribbon Tension
Knob
TOF
TOF
TOF
OF
T
183871a
CAUTION
Air Shroud
Tab Slot (2)
Assembly
Figure 2. Installing the Ribbon Cartridge
4. Remove the ribbon slack on the ribbon cartridge by turning the
ribbon tension knob clockwise.
Do not turn the ribbon tension knob counterclockwise. This
could damage the ribbon cartridge.
5. Hold the cartridge at an angle, so that the rear side nearest you
is lower than the side with the ribbon. Find the two tabs on the
outside of the cartridge and place them into the corresponding
slots on the air shroud assembly (see
Figure 2).
9
Loading Ribbon Cartridge And Paper
Ribbon
Cartridge
T
O
F
F
O
T
T
O
F
F
TO
A
183874a
Hammerbank
Cover
Ribbon Mask
TOF
OF
T
Ribbon
A
183872a
CAUTION
10
Ribbon Tension Knob
Ribbon Cartridge
Figure 3. The Ribbon Cartridge Snapped in Place
6. Rock the cartridge downward, making sure that the ribbon goes
between the hammerbank cover and the ribbon mask
(see Figure 3). You will feel it snap into place.
Make sure that the ribbon does not twist or fold over.
7. Turn the ribbon tension knob clockwise a few times to make
sure the ribbon tracks correctly in the ribbon path.
Loading Paper (Standard Configuration)
Loading Paper (Standard Configuration)
When you start this procedure, verify that the printer cover is open,
the platen lever is raised, and the tractor doors are open.
Edge of
Paper
Box
183438b
Label
Figure 4. Aligning the Paper Supply
1. Prepare the paper supply:
Cabinet Model
a. Open the front door of the printer cabinet.
b. Place the paper supply inside the printer, on the floor of the
cabinet.
c. Align the paper supply with the front label on the floor of the
printer.
d. Ensure that the paper pulls freely from the box.
e. Feed the paper up through the paper slot.
NOTE: The P7220 and P7200HD model have a metal paper guide
(see
Figure 5 on page 12). Load the paper on top of this
guide.
11
Loading Ribbon Cartridge And Paper
Paper Slot
Wire
Guide (2)
Paper
Slot
Metal Paper Guide
(P7220 and P7200HD)
183439b
183440b
Cabinet Model Pedestal Model
183439 REV B
Figure 5. Feeding the Paper Through the Paper Slot
Pedestal Model
a. Place the paper supply on the floor in front of the printer, or
on the optional paper shelf, if attached.
b. Ensure that the paper pulls freely from the box.
NOTE: Be sure the paper feeds between the two wire guides.
2. Hold the paper in place with one hand (to prevent it from
slipping down through the paper slot) while pulling it through
from above with your other hand.
3. Pull the paper above and behind the ribbon mask, which is a
silver metal strip.
183440
12
Left Tractor Lock
Loading Paper (Standard Configuration)
Left Tractor Door
Paper
TOF
TOF
183441b
Figure 6. Loading Paper onto the Left Tractor Sprockets
4. Load the paper on the left tractor sprockets.
5. Close the tractor door.
13
Loading Ribbon Cartridge And Paper
CAUTION
Tractor
Splined Shaft
Tractor Lock
To avoid damage to the printer caused by printing on the
platen, always position the left tractor unit directly to the left of
the “1” mark on the paper scale.
Tractor
Paper
183442b
Paper Scale
14
Figure 7. Using the Paper Scale as a Guide
6. If adjustment is necessary:
a. Unlock the left tractor by placing the tractor lock in the
middle position.
b. Slide the tractor until it is directly to the left of the number
“1” on the paper scale and lock it. You can also use the
paper scale to count columns.
c. Lock the left tractor.
Loading Paper (Standard Configuration)
Right Tractor Door
TO
F
F
TO
T
OF
F
TO
183443b
Figure 8. Loading the Paper onto the Right Tractor Sprockets
7. Unlock the right tractor.
8. Load the paper onto the right tractor sprockets.
9. Close the tractor door.
10. Make sure the leading edge of the first sheet of paper is parallel
to the top of the tractors. If the paper is misaligned, reload it
onto the tractor sprockets until its edge is parallel to the splined
shaft.
11. Slide the right tractor to remove paper slack or to adjust for
various paper widths.
12. Lock the right tractor.
15
Loading Ribbon Cartridge And Paper
Vertical Position
Knob
Paper Thickness
Indicator
A
183444b
Platen
Stop
Platen Lever
183444 REV B
183445b
Figure 9. Set the Platen Lever based on the Paper Thickness
13. Raise the platen lever all the way.
14. Turn the vertical position knob to feed the paper up into the
paper guide assembly.
15. Turn the platen stop knob clockwise or counterclockwise to
match the paper thickness. (The A-B-C scale corresponds
approximately to 1-, 3-, and 6-part paper thickness).
A
183446b
Platen Stop
Knob
16
NOTE: The platen stop allows you to set an optimum and
consistent thickness that is not affected when opening and
closing the platen lever.
16. Lower the platen lever until it stops.
17. If necessary, press ON LINE/CLEAR to remove the
“LOAD PAPER” fault message from the display.
18. Press the PAPER ADVANCE key several times to make
sure the paper feeds properly beyond the tractors over the
lower paper guide. Feed sufficient paper to ensure the paper
stacks correctly.
19. Close the printer cover.
20. Close the cabinet door.
21. Press ON LINE/CLEAR to place the printer online and resume
printing.
Set The Top-Of-Form
Every time you load paper, you set the top-of-form (TOF) location.
This procedure must be performed the first time paper is introduced
into the printer, and every time new paper is loaded.
1. Press ON LINE/CLEAR to place the printer in offline
mode. The LCD will display “OFFLINE / QUICK SET-UP.”
Loading Paper (Standard Configuration)
Vertical Position Knob
Platen Lever
183447b
Figure 10. Raising the Platen Lever
2. Raise the platen lever as far as it will go. This allows you to turn
the vertical position knob freely to align the top-of-form.
17
Set The Top-Of-Form
Figure 11. Aligning the First Print Line with the TOF Indicator
TOF Indicator
Perforation
TOF
TOF
Vertical
Position
Knob
TO
F
OF
T
183448b
18
3. Locate the TOF indicator. It is a small tab located on both the
right and left tractor doors.
4. Turn the vertical position knob to align the top of the first print
line with the TOF indicator. For best print quality, it is
recommended that the top-of-form be set at least one print line
or more below the perforation.
NOTE: For exact positioning, press the VIEW/EJECT key to
move the last data printed to the tractor area for viewing.
While in View mode “Printer in View” displays. Press the
Up or Down Arrow keys to move the paper vertically in
small increments. Pressing the VIEW/EJECT key a second
time moves the paper back to the adjusted print position.
The key works both online and offline provided that the
printer is in View mode. (This procedure is applicable for
both the cabinet and pedestal models.)
183444b
Platen Lever
Figure 12. Closing the Platen Lever
5. Lower the platen lever until it stops.
6. Press ON LINE/CLEAR to remove any fault messages (such
as “LOAD PAPER”) from the message display.
7. Press SET TOF. The top-of-form position you have set
moves down to the print position.
8. Press ON LINE/CLEAR to place the printer in online mode.
19
Clearing Paper Jams
Clearing Paper Jams
IMPORTANT
Be careful when pulling any paper backwards through the
paper path, especially when using label stock. If you are not
careful, labels can detach and adhere to the printer within the
paper path, where only a service representative can remove
them.
Tractor Door
183818a
20
Platen Lever
Figure 13. Raising the Platen Lever
1. Open the printer cover.
2. Raise the platen lever as far as it will go (see Figure 13).
Paper
Tractor Door
Vertical
183450b
Position Knob
Figure 14. Clearing a Paper Jam
3. Open both tractor doors.
4. Inspect the paper path and tractors for jammed or torn paper.
Remove any pieces of paper by turning the vertical position
knob (see
Figure 14).
5. Check that the ribbon mask has not been bent in such a way as
to block the paper path. If the ribbon mask is damaged or bent,
contact a service representative.
6. Check the paper path between the face of the platen and the
ribbon mask for pieces of torn paper and ribbon lint.
21
Clearing Paper Jams
Paper
183451b
Tractor Door
Figure 15. Reloading Paper
7. Reload the paper in the tractors (see Figure 15).
22
Vertical Position
Knob
Paper Thickness
Indicator
Platen Lever
8. Raise the platen lever all the way.
9. Turn the vertical position knob to feed the paper up into the
10. Turn the platen stop knob clockwise or counterclockwise to
A
Platen Stop
Knob
183444b
Platen
Stop
A
183444 REV B
183445b
Figure 16. Setting the Platen Lever
paper guide assembly.
match the paper thickness (A-B-C scale corresponds
approximately to 1-, 3-, and 6 part paper thickness). See
Figure 16.
183446b
11. Lower the platen lever until it stops.
12. If necessary, press ON LINE/CLEAR to remove the “load
paper” fault message from the display.
23
Clearing Paper Jams
13. Press the PAPER ADVANCE key several times to make
14. Close the printer cover.
15. Close the cabinet door.
16. Press ON LINE/CLEAR to place the printer online and resume
NOTE: On Cabinet models, ensure that the paper folds the same
sure the paper feeds properly beyond the tractors over the
lower paper guide. Feed sufficient paper to ensure the paper
stacks correctly.
printing.
way in the stacking area inside the cabinet. If possible,
close the rear cabinet door. Longer forms may require the
doors to be open.
On Pedestal models, when printing, ensure that the paper
folds the same way in the stacking area as it does in the
paper supply area. Forms are designed to stack only when
using the rear exit path. Forms cannot be stacked when
using the top exit paper path.
24
Most Frequent Problems and Solutions
Problem Corrective Action
Poor print quality
• dark print
• light print
• light print on half of the page
• missing dots or characters
• smeared print
• wavy vertical lines
• Adjust the forms thickness lever setting.
Print quality can be affected if it is too loose
or too tight.
• Adjust the paper tension horizontally by
moving the right tractor. Print quality can be
affected if it is too loose or too tight.
• Make sure the ribbon threads between the
hammerbank cover and ribbon mask, as
shown on the ribbon path diagram on the
pedestal models. Turn the ribbon cartridge
knob clockwise to ensure that the ribbon
tracks correctly in the ribbon path.
• Be sure to use an approved ribbon.
Torn or damaged forms • Reset the forms thickness lever for thicker
paper.
• Adjust the paper tension horizontally by
moving the right tractor. Too high a paper
tension can cause tearing of the tractor feed
holes.
• Check the paper slot for foreign material.
• For thick, multipart forms, set the OPEN
PLATEN @ BOF to enable. Refer to the
Printer Control Menu in the User’s Manual.
Loss of forms position • Set the forms thickness lever for thicker
paper.
25
Contact Information
Problem Corrective Action
Lost dots (incompletely formed
characters)
Horizontally or vertically
misaligned character positions
Erratic character height
Vertically misaligned print
Contact Information
Printronix Customer Support Center
IMPORTANT
Please have the following information available prior to calling
the Printronix Customer Support Center:
• Model number
• Serial number (located on the back of the printer)
• Installed options (i.e., interface and host type if applicable to
the problem)
• Configuration printout (Press PRT CONFIG on the control
panel, then press Enter)
• Lower the forms thickness lever.
• Adjust the paper tension horizontally by
moving the right tractor. Print quality can be
affected if it is too loose or too tight.
• Clear the paper path of any obstructions.
• If problems persists, contact a service
representative.
26
• Is the problem with a new install or an existing printer?
• Description of the problem (be specific)
• Good and bad samples that clearly show the problem (faxing of
these samples may be required)
Americas (714) 368-2686
Europe, Middle East, and Africa (31) 24 6489 410
Asia Pacific (65) 6548 4114
China (86) 800-999-6836
http://www.printronix.com/public/servicessupport/default.aspx
Printronix Supplies Department
Printronix Supplies Department
Contact the Printronix Supplies Department for genuine Printronix
supplies.
Americas (800) 733-1900
Europe, Middle East, and Africa 33 (0) 1 46 25 19 07
Asia Pacific (65) 6548 4116
or (65) 6548 4182
China (86) 400-886-5598
http://www.printronix.com/public/supplies/default.aspx
Corporate Offices
Printronix, Inc.
14600 Myford Road
P.O. Box 19559
Irvine, CA 92623-9559
Phone: (714) 368-2300
Fax: (714) 368-2600
Printronix, Inc.
Nederland BV
P.O. Box 163, Nieuweweg 283
NL-6600 Ad Wijchen
The Netherlands
Phone: (31) 24 6489489
Fax: (31) 24 6489499
Printronix Schweiz GmbH
42 Changi South Street 1
Changi South Industrial Estate
Singapore 486763
Phone: (65) 6542 0110
Fax: (65) 6546 1588
27
For More Information
Printronix Commercial (Shanghai) Co. Ltd
22F, Eton Building East
No.555, Pudong Av.
Shanghai City, 200120, P R China
Phone: (86) 400 886 5598
Fax: (86-21) 5138 0564
Visit the Printronix web site at www.printronix.com
For More Information
This
Quick Reference Guide
your printer. Refer to the
included with this book) for more detailed information including:
• Other Configuration Menus
• Interfaces
• Diagnostics and Troubleshooting
• Printer Options
provides general information for use of
User’s Manual
(located on the CD-ROM
28
• Specifications
• Glossary of Terms
Notices
This information was developed for products and services offered
in the U.S.A.
Printronix may not offer the products, services, or features
discussed in this document in other countries. Consult your
Printronix representative for information on the products and
services currently available in your area. Any reference to a
Printronix product, program, or service is not intended to state or
imply that only that Printronix product, program, or service may be
used. Any functionally equivalent product, program, or service that
does not infringe any Printronix intellectual property rights may be
used instead. However, it is the user’s responsibility to evaluate
and verify the operation of any non-Printronix product, program, or
service.
Printronix may have patents or pending patent applications
covering subject matter described in this document. The furnishing
of this document does not give you any license to these patents.
You can send license inquires, in writing, to:
Printronix, Inc.
14600 Myford Road
P.O. Box 19559
Irvine, CA 92623-9559 U.S.A.
The following paragraph does not apply to the United
Kingdom or any other country where such provisions are
inconsistent with local law:
PRINTRONIX, INC. PROVIDES THIS PUBLICATION “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do
not allow disclaimer of express or implied warranties in certain
transactions, therefore, this statement may not apply to you.
29
Notices
This publication could include technical inaccuracies or
typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new
editions of the publication. Printronix may make improvements and/
or changes in the product(s) described in this publication at any
time without notice.
Any references in this publication to non-Printronix Web sites are
provided for convenience only and do not in any manner serve as
an endorsement of those Web sites. The materials at those Web
sites are not part of the materials for this Printronix product and use
of those Web sites is at your own risk.
Any performance data contained herein was determined in a
controlled environment. Therefore, the results obtained in other
operating environments may vary significantly. Some
measurements may have been made on development-level
systems and there is no guarantee that these measurements will be
the same on generally available systems. Furthermore, some
measurement may have been estimated through extrapolation.
Actual results may vary. Users of this document should verify the
applicable data for their specific environment.
30
Information concerning non-Printronix products was obtained from
the suppliers of those products, their published announcements or
other publicly available sources. Printronix has not tested those
products and cannot confirm the accuracy of performance,
compatibility or any other claims related to non-Printronix products.
Questions on the capabilities of non-Printronix products should be
addressed to the suppliers of those products.
Printronix encourages owners of information technology (IT)
equipment to responsibly recycle their equipment when it is no
longer needed. Printronix offers a variety of programs and services
to assist equipment owners in recycling their IT products.
Information on these product recycling offerings can be found on
Printronix’s Internet site at http://www.printronix.com.
Note!
Before using this information and the product it supports, read the information and
Communication Statements on page 34.
For online versions of this book, we authorize you to:
• Copy, modify, and print the documentation contained on the
media, for use within your enterprise, provided you reproduce
the copyright notice, all warning statements, and other required
statements on each copy or partial copy.
• Transfer the original unaltered copy of the documentation when
you transfer the related Printronix product (which may be either
machines you own, or programs, if the program’s license terms
permit a transfer). You must, at the same time, destroy all other
copies of the documentation.
You are responsible for payment of any taxes, including personal
property taxes, resulting from this authorization.
Your failure to comply with the terms above terminates this
authorization. Upon termination, you must destroy your machine
readable documentation.
31
Notices
Energy Star
The Environmental Protection Agency ENERGY STAR® Computers
program is a partnership effort with manufacturers of data
processing equipment to promote the introduction of energyefficient personal computers, monitors, printers, fax machines, and
copiers to help reduce air pollution and global warming caused by
electricity generation.
32
Printronix participates in this program by introducing printers that
reduce power consumption when they are not being used. As an
NERGY STAR
E
meets the E
NOTE: The ENERGY STAR® emblem does not represent EPA
®
Partner, Printronix has determined that this product
NERGY STAR
endorsement of any product or service.
®
guidelines for energy efficiency.
Trademarks
IBM, AS/400, and Proprinter are registered trademarks, and
Intelligent Printer Data Stream and IPDS are trademarks of
International Business Machines Corporation.
Printronix, PGL, LinePrinter Plus, and IGP are registered
trademarks, and P7005, P7010, P7015, P7205, P7210, P7215,
P7200HD, P7220, and SureStak are trademarks of Printronix, Inc.
ANSI is a registered trademark of the American National Standards
Institute, Inc.
Centronics is a registered trademark of Genicom Corporation.
CSA is a registered certification mark of the Canadian Standards
Association.
Dataproducts is a registered trademark of Dataproducts
Corporation.
EIA is a registered service mark of the Electronic Industries
Association.
Epson is a registered trademark of Seiko Epson Corporation.
Ethernet is a trademark of Xerox Corporation.
IEEE is a registered service mark of the Institute of Electrical and
Electronics Engineers, Inc.
QMS is a registered trademark, and Code V is a trademark of
Quality Micro Systems, Inc.
TUV is a registered certification mark of TUV Rheinland of North
America, Inc.
UL is a registered certification mark of Underwriters Laboratories,
Inc.
ENERGY STAR is a registered trademark of the United States
Environmental Protection Agency. As an ENERGY STAR
Printronix has determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
®
Partner,
33
Notices
Product Recycling and Disposal
This product may contain a sealed, lead-acid battery; lithium
battery; nickel-metal-hydride battery; or nickel-cadium battery.
Batteries of these types must be recycled or disposed of properly.
Recycling facilities may not be available in your area.
In the United States, Printronix has established a collection process
for reuse, recycling, or proper disposal of used batteries and battery
packs from Printronix equipment. For information on proper
disposal of the batteries in this product, please contact Printronix.
For information on disposal of batteries outside the United States,
contact your local waste disposal facility.
Communication Statements
Federal Communications Commission (FCC)
Statement
34
This equpment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Fules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be
used in order to meet FCC emission limits. Printronix is not
responsible for any radio or television interference caused by using
other than recommended cables and connectors or by
unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Fules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
European Union (EU) Conformity Statement
Hereby, Printronix declares that this
product is in compliance with the essential
requirements and other relevent
provisions of Directive 1999/5/EC.
Printronix cannot accept responsibility for any failure to satisfy the
protection requirements resulting from a non-recommended
modification of the product, including the fitting of non-Printronix
option cards.
This product has been tested and found to comply with the limits for
Class A Information Technology Equipment according to European
standard EN 55022. The limits for Class A equipment were derived
for commercial and industrial environments to provide reasonable
protection against interference with licensed communication
devices.
WARNING
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Properly shielded and grounded cables and connectors must be
used in order to reduce the potential for causing interference to
radio and TV communications and to other electrical or electronic
equipment. Printronix cannot accept responsibility for any
interference caused by using other than recommended cables and
connectors.
35
Notices
Industry Canada Compliance Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A conform á la norme
NMB-003 du Canada.
Statement of CISPR 22 Compliance
Attention: This is a Class A Product. In a domestic environment
this product may cause radio interference in which case the user
may be required to take adequate measures.
Japanese VCCI Class A
36
German Conformity Statement
Handbuchtexte: FCC class A entspricht: EMVG Klasse A
Text Für alle in Deutschland vertriebenen EN 55022 Klasse A
Geräte:
Zulassungsbescheinigung laut dem Deutschen Gesetz über die
elektromagnetische Verträglichkeit von Geräten (EMVG) vom 18.
September 1998 (bzw. der EMC EG Richtlinie 89/336):
Dieses Gerät ist berechtigt in Übereinstimmung mit dem Deutschen
EMVG das EG-Konformitätszeichen - CE - zu führen.
Verantwortlich für die Konformitätserklärung nach Paragraph 5 des
EMVG ist die:
Printronix GmbH
Goethering 56
D-63067 Offenbach Germany
Informationen in Hinsicht EMVG Paragraph 4 Abs. (1) 4:
Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN
55022 Klasse A.
EN 55022 Klasse A Geräte müssen mit folgendem Warnhinweis
versehen werden: “Warnung: dies ist eine Einrichtung der Klasse
A. Diese Einrichtung kann im Wohnbereich Funkstörungen
verursachen; in diesem Fall kann vom Betreiber verlangt werden,
angemessene Maßnahmen durchzuführen und dafür
aufzukommen.”
EN 55024 Hinweis:
Wird dieses Gerät in einer industriellen Umgebung betrieben (wie
in EN 55024 festgelegt), dann kann es dabei eventuell gestört
werden. In solch einem Fall ist der Abstand bzw. die Abschirmung
zu der industriellen Störquelle zu öergrvßern.
Anmerkung:
Um die Einhaltung des EMVG sicherzustellen sind die Geräte, wie
in den Printronix Handbüchern angegeben, zu installieren und zu
betreiben.
China
Declaration:
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may need to
perform practical actions.
37
Notices
Taiwan
Warning:
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user will be
required to take adequate measures.
38
Korea
CAUTION:
This product is equipped with a 3-wire power cord and plug for the
user’s safety. Use this power cord in conjunction with a properly
grounded electrical outlet to avoid electrical shock.
Software License Agreement
Your printer contains, among other software, Printronix operating
software including, but not limited to the Embedded Configurable
Operating System (the “eCos Software”) as embedded software.
The terms of this Agreement apply only to the eCos Software, and
all other embedded software supplied with the printer. You accept
the terms of this Agreement by your initial use of your printer.
1. Object Code License
Printronix grants you a nonexclusive license to use the Printronix
Software, the eCos Software and all other embedded software
(collectively, the “Embedded Software” or the “Software”) only in
conjunction with the printer. As the rightful possessor of the printer,
you may make a reasonable number of copies of the Software as
necessary for backup, configuration, and restoration of the printer.
You must reproduce the copyright notice and any other legend of
ownership on each copy of the Software you make.
You may transfer possession of the Software and its media to
another party only with the transfer of the printer on which the
Software is used. If you do so, you must give the other party a copy
39
Notices
of these terms and provide all user documentation to that party.
When you do so, you must destroy any copies of Software not
resident in the printer.
Your license for the Software terminates when you no longer
rightfully possess the printer. No other rights under this license are
granted.
2. Source Code
A source code version of eCos Software is available under the
terms of the Red Hat eCos Public License v1.1 at
www.printronix.com. Printronix grants no rights whatsoever in the
source code for the Printronix Software.
3. No Warranty
THE EMBEDDED SOFTWARE IS PROVIDED UNDER THIS
LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
WITHOUT LIMITATION, WARRANTIES THAT THE EMBEDDED
SOFTWARE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR
A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE
EMBEDDED SOFTWARE IS WITH YOU. SHOULD ANY OF THE
EMBEDDED SOFTWARE PROVE DEFECTIVE IN ANY
RESPECT, YOU (NOT RED HAT, PRINTRONIX, ANY OTHER
CONTRIBUTOR OR ANY DISTRIBUTOR) ASSUME THE COST
OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION.
THIS DISCLAIMER OF WARRANTY CONSTITUTES AN
ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY OF THE
EMBEDDED SOFTWARE IS AUTHORIZED HEREUNDER
EXCEPT UNDER THIS DISCLAIMER.
40
4. Conflicting Terms
You agree that this Agreement provides you no more rights with
regards to warranty, support, indemnity or liability terms with
respect to Red Hat, Inc., Printronix, Inc. or any contributor to the
Embedded Software than that provided by the Red Hat eCos Public
License v.1.1 or any express warranty that may be made by
Printronix, Inc.
5. Limitation of Liability
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL
THEORY, WHETHER TORT (INCLUDING NEGLIGENCE),
CONTRACT, OR OTHERWISE, SHALL RED HAT, PRINTRONIX,
ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE
EMBEDDED SOFTWARE, OR ANY PART THEREOF, OR ANY
SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO YOU OR
ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES
FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER
FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY
SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH
DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY
TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING
FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT
APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THAT EXCLUSION AND LIMITATION MAY NOT APPLY TO
YOU.
6. U.S. Government Users
The Embedded Software is a "commercial item," as that term is
defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial
computer software" and "commercial computer software
documentation," as such terms are used in 48 C.F.R. 12.212 (Sept.
1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1
through 227.7202-4 (June 1995), all U.S. Government End Users
acquire Covered Code with only those rights set forth herein.
41
Notices
7. Miscellaneous
This Agreement represents the complete agreement concerning
subject matter hereof. If any provision of this Agreement is held to
be unenforceable, such provision shall be reformed only to the
extent necessary to make it enforceable. This Agreement shall be
governed by California law provisions (except to the extent
applicable law, if any, provides otherwise), excluding its conflict-oflaw provisions.
8. Red Hat Statement with regards to eCos Software
Part of the software embedded in this product is eCos - Embedded
Configurable Operating System, a trademark of Red Hat. Portions
created by Red Hat are Copyright (C) 1998, 1999, 2000 Red Hat,
Inc. (http://www.redhat.com) All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED
BY RED HAT AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
42
*254801-001*
254801-001A
Loading...