Prince Castle 913 Installation Manual

OPERATING

INSTRUCTIONS

Potato Witch

®

Model No. 913, 914 & 915

Prince Castles Potato Witch® cuts potatoes and
other vegetables with ease. A single stroke pro­duces shoestring-style or steak-cut fries. Fast and
easy, the Potato Witch® provides superior leverage
for a superior performance. Designed for safe, heavy­duty commercial use. Sturdy frame with base and
1/2 guide rods. Precision sharp, stainless steel
blades and two handles give perfect balance for easy
cutting.

TABLE OF CONTENTS PAGE

Installation................................................................... 2

Operating ..................................................................... 2

Cleaning ...................................................................... 2

Parts Identification ..................................................... 3

LIMITED WARRANTY

This product is warranted to be free from defects in
material and/or workmanship for a period of two (2)
years from the date of original installation, not to
exceed 30 months from the date of shipment from
our factory with the exception of the blades.
Blades are warranted to be free from defects at time
of delivery only.

Any component which proves to be faulty in material
and/or workmanship will be replaced or repaired (at
the option of Prince Castle, Inc.) without cost to the
customer for parts or labor.

This warranty is subject to the following exceptions/
conditions:

l This equipment is portable; charges for on-loca-

tion service (e.g., trip charges, mileage) are not
included in the provisions of this warranty.

PRODUCT SPECIFICATION

Model No. 913: 3/8 Square cut

Model No. 914: Six-section wedge (steak fries)

Model No. 915: Eight-section wedge (steak fries)

Height 17 (43.2 cm)

Width 8 (20.3 cm)

Length 10 (25.4 cm)

Shipping Weight: 12 lbs. (5.44 kg)

355 East Kehoe Blvd. l Carol Stream, IL 60188

Printed in 1999

Prince Castle Inc.

Tel: [phone]

Toll Free: 1-800-PCASTLE

l Damage caused by carelessness, neglect, and/

or abuse (e.g., dropping, tampering or altering
parts), equipment damaged in shipment, by fire,
flood or an act of God is not covered under this
warranty.

l Blades are warranted to be free from defects in

material and/or workmanship ato timeof delivery
only.

l Fax: [phone]

913-505

INSTALLATION

1. After you remove the Potato Witch® from the
carton, inspect the unit for signs of damage. If
there is damage to the unit:

l Notify carrier within 24 hours after delivery.

l Save carton and packing materials for inspection

purposes.

l Contact your local Prince Castle dealer or if

purchased directly, the Prince Castle Customer
Sales Department at 1-800-722-7853 to arrange
for a replacement.

l All inoperable warrany parts must be returned to

the Service Center.

CAUTION: Blades are extremely sharp.

2. To mount Potato Witchâ directly to the wall, hold it
up against the wall in the selected mounting area,
and mark the two holes for correct drilling location.

figure 1

2. Grasp handle at base of potato witch, with left
hand. Bring the pusher head handle downward in
one quick, firm stroke. See figure 2.

figure 2

3. Using a 5/16 drill bit, drill the two marked holes and
fill with a 5/16 anchor mount. Mount the Potato
Witchâ to the wall with the provided flat head
screwdriver.

4. The Potato Witchâ can also be mounted to an
optional wall mounting plate (913-5) which can be
purchased from Prince Castle.

5. Place the mounting plate against the wall and mark
the two outside holes with a pencil.

6. Drill the holes using a 3/8 drill bit. Put a 7/16
anchor into the wall.

7. Put the two 5/16 flat head screws through the back
of the mounting plate. Mount the mounting plate to
the wall using two 7/16 flat head screws.

8. Line up the Potato Witchâ mounting plate with the
two flat head screws, and tighten with wing nuts
provided.

OPERATION

1. With your right hand, raise pusher handle to the
extreme upright position. Using a fork, place
product on blades. See figure 1.

MAINTENANCE

1. Lubricate guide rods daily.

2. Tighten blades daily with hex head wrench pro­vided.

IMPORTANT: Loose blades can cause damage to the
blades and the pusher head.

CLEANING

1. Immerse unit into hot soapy water, using spray if
available, rinse thoroughly. Spray wash unit.

2. Rinse thoroughly. Let air dry.

IMPORTANT: Use Prince Castle model number 912­107 cleaning brush.

CAUTION: Clean blades from reverse side.

2