![](/html/35/3548/354862b1cd12214327116ebeb72c7973ba4148a9fd925411880bfb4e54f91d15/bg1.png)
DIGIMA X FS
8-Channel Preamplifier with 24-bit/96k ADA T I/O (dual SMUX)
User’s Manual
Version 1.0
© 2006, PreSonus Audio Electronics, Incorporated.
All rights reserved.
![](/html/35/3548/354862b1cd12214327116ebeb72c7973ba4148a9fd925411880bfb4e54f91d15/bg2.png)
WARRANTY
PreSonus Limited Warranty
PreSonus Audio Electronics Inc. warrants this product to b e free of defects in material and workmanship for a period
of one year from the date of original retail purchase. This warranty is enforceable only by the original retail
purchaser. To be protected by this warranty, the purchaser must complete an d return the enclosed warranty card
within 14 days of purchase. During th e warranty perio d PreSonus shall, at its sole and absolute opti on, either repair
or replace, free of charge, any product that proves to be defective on inspection by PreSonus or its authorized
service representative. To obtain warranty service, the purchaser must first call or write PreSonus at the address
and telephone number printed belo w to obtain a Return Aut horization Num ber and instructions of where to return the
unit for service. All inquiries must be accompanied b y a description of the problem. All authorized returns must be
sent to the PreSonus repair facility postage prepaid, insured and properl y packaged. PreSonus reserves the right t o
update any unit returned for repair. PreSonus reserves the right to change or improve the design of the product at
any time without prior notice. This warranty does not cover claims for damage due to abuse, neglect, alteration or
attempted repair by unauthorized personnel, and is limited to failures arising during normal use that are due to
defects in material or workmanship in the product. Any implied warranties, including implied warranties of
merchantability and fitness for a particular purpose, are limited in duration to the length of this limited warranty. Some
states do not allow limitations on how long an implied warranty lasts, so the above limitation may not ap ply to you. I n
no event will PreSonus be liable for incidental, consequential or other damages resulting from the breach of an y
express or implied warranty, including, among other things, damage to pr operty, damage based on inc onvenience or
on loss of use of the product, and, to the extent permitted by law, dam ages for personal injury. Some states do not
allow the exclusion of limitation of incidental or consequ ential damages, so the above li mitation or exclusion may not
apply to you. This warranty gives you specific legal righ ts, and you ma y also have other rights, which vary form state
to state. This warranty only applies to products sold and used in the United States of America. For warranty
information in all other countries please refer to your local distributor.
PreSonus Audio Electronics, Inc.
7257 Florida Blvd.
Baton Rouge, LA 70806
(225) 216-7887
© 2006, PreSonus Audio Electronics, Incorporated. All rights reserved.
![](/html/35/3548/354862b1cd12214327116ebeb72c7973ba4148a9fd925411880bfb4e54f91d15/bg4.png)
OVERVIEW
1.1 Introduction
Thank you for purchasing the PreSonus DigiMax FS™ 8-Channel Preamplifier with 24bit/96k ADAT I/O (dual SMUX). The DIGIMAX FS is an eight-channel microphone
preamplifier, with 24-bit/96k ADAT dual SMUX I/O and word clock I/O. Loaded with direct
outputs and inserts on every channel, the DIGIMAX FS is the perfect hardware expansion
for your FIRESTUDIO or any digital recording system with optical light pipe expansion
capability including DigiDesign’s HD and 002 systems, RME, YAMAHA, Alesis, Mackie and
many others.
The DIGIMAX FS is also loaded with new patented JetPLL jitter reduction technology
ensuring ultra-high converter performance, fast and robust locking through a wide range and
variation of frequencies and noise shaping to remove nearly all audio band jitter.
PreSonus Audio Electronics is committed to the philosophy of constant product
improvement. Our experience has taught us the best way to convert this philosophy into
action is by listening to the experts on our gear, our valued customers. We appreciate the
support you have shown us through the purchase of this product.
Please pay close attention when connecting your DigiMax FS to your system. Bad cables
and improper grounding are the most common causes of problems encountered in the
recording or sound reinforcement environments. We recommend checking your cables,
connections and grounding if you experience any noise or sonic performance problems.
Also please scan this manual before hooking up your DigiMax FS to your system to
familiarize yourself with its functions and features.
Good luck and enjoy your DigiMax FS!
![](/html/35/3548/354862b1cd12214327116ebeb72c7973ba4148a9fd925411880bfb4e54f91d15/bg5.png)
OVERVIEW
1.2 Front Panel
Class A Mic Pre. Each channel of your DigiMax FS contains a Class A discrete
differential input amplifier, providing ultra low noise and wide gain control allowing the
DigiMax FS user to boost desirable signal without increasing unwanted background
noise.
Neutrik Combo Connectors. Each channel of the DigiMax FS has a Mic/Line
connector using the Neutrik Combo connector. This revolutionary style connector
enables you to use either ¼” phone or XLR connectors in the same female input. The
first two channels of the FIREPOD are ¼” instrument and microphone XLR inputs. The
line level inputs for these two channels are on the back panel of the DigiMax FS via
return 1 & 2.
48V Phantom Power. Channels one through four and five through eight of the DigiMax
FS have a 48V Phantom power available in groups. When the Phantom power switch is
engaged, power is supplied at a constant rate to that group of preamps, assuring
optimum performance of your condenser microphone(s). These switches are located on
the far left of the front panel.
Sample Rate Selector. The DigiMax FS has a switch on the front panel for sample rate
selection (44.1k, 48k, 88.2k, and 96k.)
EXT Clock. The external clock switch allows the DigiMax FS to choose an external
source for clocking. To switch between ADAT and BNC sync, simply engage the switch
again. The switch will light RED for ADAT sync and BLUE for BNC sync. When in either
mode, the DigiMax FS will automatically recognize which sampling rate is required for
optimum synchronization.