PRESONUS Dante CDL Series Update Manual

Dante™ Firmware for
CDL-Series Loudspeakers

Update Guide

www.presonus.com

®

Dante™ Firmware Update Guide for CDL-series Loudspeakers

1

Periodically, the Dante module onboard your CDL-series loudspeaker will require a rmware update. To
begin, you must connect a computer to the same Dante network as your CDL-series loudspeakers.

1. Log into your My PreSonus account and download the A2-0.9.0.dnt rmware. Note: Your CDL-

series loudspeakers must be registered in your My PreSonus account to download the rmware.

2. Go to www.Audinate.com.

3. Log in or create an Audinate user account.

4. Download the Dante Firmware Update Manager application.

5. Install and run the Dante Firmware Update Manager on the computer
networked to your CDL-series loudspeakers.

6. Click Next.

7. Select Update Dante Firmware.