Precision Power FRX 456 User Manual

TM

CLASS

CONTENTS

(click on a topic to view)

Congratulations Functions

Features and Specifications Input

Frequency Chart Troubleshooting

Installation / Mounting System One Diagram

Wiring System Tw o Diagram

Wiring Block Diagram

Functions Warranty

FRX456 Electronic Crossover OWNERS MANUAL POWER

Congratulations and thank you.....

for choosing
proudly design, engineer and manufacture audio products at our facility in
Phoenix, Arizona. Our award winning engineering team utilizes innovative
technology to consistently deliver Absolutely State of the Art
sound quality, reliability, and value. This
our commitment to offer you unparalleled versatility and quality for years of
dependable service and listening enjoyment.

PrecisionPower

audio epuipment. At

PrecisionPower

PrecisionPower

TM

performance,

product reflects

we

S er vice

Do not attempt to service
Performing exploratory surgery on your audio equipment yourself
will void the warranty. Many parts of your
are custom built to our specifications. Our factory parts are not
made available to anyone else nor are they for sale. Our goal
is to make sure that your
sound as good as the day it was purchased. Contact your
authorized
service through

PrecisionPower

PrecisionPower

PrecisionPower

PrecisionPower

dealer about obtaining any warranty

.(See Warranty insde back cover)

products yourself.

PrecisionPower

product will always

gear

FOR YOUR RECORDS:

Model
Serial Number
Purchase Date

Caution!

The extended use of a high powered audio system may
result in hearing loss or damage. While
systems are capable of
incredible accuracy, they are also designed for you to
enjoy at more reasonable levels all of the sonic subtleties
created by musicians. Please observe all local sound
ordinances.

"Concert Level"

PrecisionPower

volumes with

BA CK TO CONTENTS

FEATURES / SPECIFICATIONS

Linkwitz-Riley 24 dB/octave Subwoofer Filter
Linkwitz-Riley 12dB/octave Mid Bass, Mid Range and High
2,3, or 4-way active crossover
Input Combine Switch
Input Attenuation
Detented Frequency Selection Controls
Rear Fill Level Control
Sub Woofer Level Control
Gold RCA input and output connectors
PWM Power Supply
Designed and Handcrafted in the USA

Specifications

Signal-to-Noise Ratio >102dB
Total Harmonic Distortion (1KHz, 1VRMS) 0.002%
Crossover Slopes:

All Except Sub Low Pass 12 dB/octave

Sub Low Pass 24 dB/octave
Crossover Frequencies:
Front: High Pass 80 Hz-7.5 KHz to 20 KHz

Mid Range 80 Hz-1.7 KHz to high pass

Mid Bass 55 Hz-500 Hz to midrange
Rear: High Pass 80 Hz-7.5 KHz to 20 KHz

Mid Range 80 Hz-1.7 KHz to high pass
Sub: Low Pass 20 Hz-270 Hz

Sub Sonic 7 Hz-46 Hz
Input Impedance 10 KΩ
Maximum Output (10 KΩ Load) 8 VRMS
Supply Voltage 11-15 VDC
Dimensions 5.125"W

10.50" L

1.750"H

1

BA CK TO CONTENTS

FREQUENCY CHART

All crossover frequency controls are detented. Each "click" counted
from the full counterclockwise position corresponds to a specific
frequency. Refer to this chart and page 6 for set-up instructions.

Detent Sub Sonic Sub Mid Bass Mid Range High Pass

1 7 Hz 20 Hz 55 Hz 80 Hz 80 Hz
2 7 Hz 22 Hz 56 Hz 80 Hz 88 Hz
3 7 Hz 22 Hz 56 Hz 80 Hz 88 Hz
4 7 Hz 22 Hz 56 Hz 80 Hz 88 Hz
5 8 Hz 24 Hz 56 Hz 80 Hz 88 Hz
6 8 Hz 24 Hz 60 Hz 88 Hz 96 Hz
7 8 Hz 26 Hz 64 Hz 88 Hz 100 Hz
8 8 Hz 28 Hz 68 Hz 88 Hz 108 Hz
9 9 Hz 30 Hz 72 Hz 96 Hz 1 16 Hz
10 9 Hz 32 Hz 80 Hz 96 Hz 128 Hz
11 10 Hz 34 Hz 84 Hz 104 Hz 140 Hz
12 10 Hz 36 Hz 92 Hz 1 12 Hz 152 Hz
13 10 Hz 40 Hz 100 Hz 120 Hz 172 Hz
14 11 Hz 44 Hz 1 12 Hz 128 Hz 200 Hz
15 12 Hz 48 Hz 124 Hz 136 Hz 216 Hz
16 13 Hz 54 Hz 140 Hz 152 Hz 248 Hz
17 14 Hz 60 Hz 152 Hz 168 Hz 280 Hz
18 15 Hz 64 Hz 160 Hz 176 Hz 304 Hz
19 16 Hz 66 Hz 168 Hz 184 Hz 324 Hz
20 16 Hz 70 Hz 172 Hz 192 Hz 344 Hz
21 17 Hz 74 Hz 180 Hz 200 Hz 368 Hz
22 18 Hz 78 Hz 192 Hz 216 Hz 392 Hz
23 19 Hz 82 Hz 200 Hz 232 Hz 424 Hz
24 19 Hz 88 Hz 212 Hz 240 Hz 452 Hz
25 21 Hz 94 Hz 224 Hz 264 Hz 492 Hz
26 22 Hz 100 Hz 236 Hz 280 Hz 536 Hz
27 23 Hz 108 Hz 252 Hz 312 Hz 656 Hz
28 25 Hz 1 18 Hz 272 Hz 344 Hz 752 Hz
29 26 Hz 128 Hz 292 Hz 384 Hz 880 Hz
30 29 Hz 142 Hz 312 Hz 448 Hz 1.02 KHz
31 32 Hz 162 Hz 344 Hz 512 Hz 1.26 KHz
32 35 Hz 180 Hz 372 Hz 616 Hz 1.56 KHz
33 38 Hz 198 Hz 400 Hz 752 Hz 2.1 1 KHz
34 40 Hz 212 Hz 424 Hz 888 Hz 2.65 KHz
35 41 Hz 226 Hz 440 Hz 1.00 KHz 3.12 KHz
36 43 Hz 238 Hz 456 Hz 1.17 KHz 3.77 KHz
37 44 Hz 248 Hz 472 Hz 1.37 KHz 4.90 KHz
38 45 Hz 256 Hz 480 Hz 1.53 KHz 5.88 KHz
39 46 Hz 264 Hz 492 Hz 1.69 KHz 6.70 KHz
40 46 Hz 264 Hz 492 Hz 1.77 KHz 7.40 KHz
41 46 Hz 270 Hz 500 Hz 1.77 KHz 7.50 KHz

2

BA CK TO CONTENTS

INSTALLATION / MOUNTING

NOTE:

Before beginning, disconnect the negative (-) terminal of the batter y
to prevent an electrical short to ground. Reconnect the negative
terminal only after all connections have been made.

Mounting

T o prevent damage to the crossover while driving, mount it in a
secure place. Choosing the appropriate location will depend
upon your vehicle and the complexity of your system design.
Typical mounting locations include the trunk and passenger
compartment (floor or under seat). Never mount the crossover
in a location that would subject it to immersion or exposure to
water.

Once a location has been chosen, securely mount the

FRX-456

with four mounting screws. Be Careful! Inspect the
area underneath to be sure you are not drilling into wires, brake
or fuel lines, etc. that could be damaged by the drill bit or screws.

Dimensions

5.125"W

10.50" L

1.750"H

3

BA CK TO CONTENTS

Factory Ground wire may
need to be replaced if it is
frayed or broken.

Run signal cables (RCAs)
and remote turn-on lead
down the opposite side of
the vehicle from the power
wire to avoid radiated noise.

Avoid sharp edges that
could chafe through the
insulation.

WIRING

eject

123

4

Trk 1

5

876

BASS

TREBLE

MARKET

PPI

INGDPT

BALANCE

TRACK

VOLUME

RIGHT

FOWARD

REVERSE

LEFT

Positive
Battery
Terminal

Fuse must be
installed within
18" of battery

Drill a hole in the firewall
and use a rubber grommet
to keep wire from shorting.

Run the cables under the
carpet near the side of the
vehicle. Be careful not to
drill or screw into the wires
when you replace the trim.

NOTE

Before beginning, disconnect the negative (-) terminal of the
battery prior to working on the positive (+) terminal to prevent
a short to ground. This is important, unless you want to spend
the rest of your life with a nickname like
Reconnect the negative terminal only after all connections have
been made.

Power distribution block.

Attach Ground Wires
firmly to solid metal.

"Sparky,"

or

"Smokey."

4

BA CK TO CONTENTS

WIRING

r

The next step is to connect the Power , Ground, and Remote wires to
your

FRX-456

. The power wire should run from the mounting location
through the vehicle to the battery or power distribution block. Avoid
sharp corners, creases, and sharp body parts. When passing through
any metal wall (i.e. firewall etc.), a grommet must be used to prevent
the wire from chaffing and shorting to ground.
The ground wire should be of the same gauge as the power wire. As
a rule of thumb, use as short a length of wire as possible.
Find a location near the crossover that is metal (the floor is ideal) and
clean an area about the size of a quarter to bare metal. Drill a pilot
hole in the middle of this area. Be Careful! Inspect the area underneath
to be sure you are not drilling into wires, brake or fuel lines, etc.
Terminate the wire with a ring connector and attach it to the bare
metal using a #8 sheet metal screw and washer (not supplied). We
suggest crimping and/or soldering this connection. After the connection
is complete, coat the area with silicone or some similar material to
prevent rust from developing.
Finally, the remote wire needs to
run to the power antenna (or

Powerlock

Ground

Remote

Powe

amplifier remote) lead of the head
unit. This wire supplies a 12 volt
signal to the

FRX-456

when the

T/O

B+

main system is activated.
Once you have routed the power ,
ground, and remote wires through
the vehicle, it is time to connect the wires to the

FRX-456

. Be sure
that you have not reconnected the ground cable to the negative post
of the battery.
Cut off excess wire and, using wire strippmrs, strip the power , ground
and remote cables about 1/8 inch. Locate the power, ground, and
remote

Powerlock

connector (supplied). On the top of the connector
are three slotted screws. With a small flat-bladed screwdriver , loosen
the screws before attempting to insert the cables. After you have
inserted the stripped end of each cable into the connector, secure it
by tightening the associated screw. Check that each connection is
tight. If the wires are secure, the connector may be plugged into the

FRX-456

.

5

BA CK TO CONTENTS

FUNCTIONS

Sub Gain: Adjusts Sub output level allowing a boost or cut of +/- 10dB.

1
2

Sub Sonic: Sets a high pass to filter low Sub Sonic frequencies.

3

Sub: Sets lowpass Crossover frequency for the Sub output.

4

Mid Bass: Sets the Highpass crossover frequency to the Front Mid Bass Output.

5

Mid Range: Tracking 2-way crossover frequency sets Low pass to Front Mid Bass output and
High pass to Front Mid Range output.

High Pass: Tracking 2-way crossover frequency sets High pass to Front High Pass output and

6

Low pass to Front Mid Range output.

7

Mid Range: Sets High pass crossover frequency to Rear Mid Range output.
High Pass: Tracking 2 way crossover sets High pass frequency to Rear High Pass output and

8

Low pass frequency to Rear Mid Range output.
Rear Fill Level: This attenuates the rear outputs.

9

Power

Amplitude

Precision

FRX-456

4

1

_

-10

Sub Gain

Midbass

5

Amplitude

Power

2

16

+

10

+10

7

Sub Sonic

Sub Woofer

Midrange Tweeter

6

1

+10 dB

-10 dB

3

25

36

22

46

Sub

0 dB

70

Sub Sonic

12 dB

2

5

4

92

118

56

264

Mid Bass

192

172

112

272

80

492

Mid Range

Front

Amplitude

Low Pass

24 dB

3

Frequency

6 7 8

344

152

344

752

112

80

1.77K

7.4K

High Pass

Midrange Tweeter

7 8

Four/Five/Six Way Electronic Crossover

344

192

152

344

80

80

Mid Range

7.4K

1.77K

High Pass

Rear

9

752

_

Rear Fill Level

Variable

Level

Made in

+

USA

9

100 Hz

400 Hz 3 KHz

Frequency

400 Hz 3 KHz

Frequency

6

BA CK TO CONTENTS

FUNCTIONS

Sub Gain: Adjusts Sub output level allowing a boost or cut of +/- 10dB.

1
2

Sub Sonic: Sets a high pass to filter low Sub Sonic frequencies.

3

Sub: Sets lowpass Crossover frequency for the Sub output.

4

Mid Bass: Sets the Highpass crossover frequency to the Front Mid Bass Output.

5

Mid Range: Tracking 2-way crossover frequency sets Low pass to Front Mid Bass output and
High pass to Front Mid Range output.

High Pass: Tracking 2-way crossover frequency sets High pass to Front High Pass output and

6

Low pass to Front Mid Range output.

7

Mid Range: Sets High pass crossover frequency to Rear Mid Range output.
High Pass: Tracking 2 way crossover sets High pass frequency to Rear High Pass output and

8

Low pass frequency to Rear Mid Range output.

+10 dB

0 dB

-10 dB

1

Sub Sonic

12 dB

Low Pass

24 dB

2

3

Frequency

Amplitude

Amplitude

4

100 Hz

Midbass

5

400 Hz 3 KHz

Sub Out

L

L

R

R

Sub

Mid Bass

Midrange Tweeter

6

Front Outputs

L

L

R

R

Mid Range

High Pass

Frequency

Amplitude

Rear Outputs

L

L

R

R

Mid Range

Midrange Tweeter

7 8

400 Hz 3 KHz

High Pass

Variable

Level

All crossover frequency controls are detented. Each "click" counted from the
fully counterclockwise position corresponds to a specific frequency. See the
Frequency Chart on page 2 for these values.

If you are actively crossing over:

THESE SPEAKERS:

Subwoofer

Front

Mid Bass / Mid Range / Tweeter
Mid Range / Tweeter
Full Range (coaxial or component

with passive crossover)

Rear

Mid Range / Tweeter
Full Range (coaxial or component

with passive crossover)

USE THESE OUTPUTS:

Sub output
Mid Bass / Mid Range / High Pass

Mid Range / High Pass
High Pass

Mid Range / High Pass
High Pass

7

BA CK TO CONTENTS

Frequency

A

t

Attenuation

(up to 8v) or direct speaker lead inputs from common
grounded (not high powered) headunits. See diagram below
for wiring.

B

Combined Inputs

Rear Inputs. Leave the switch OUT for front/rear fading.

C

Rear Inputs

your head unit here.

INPUT

Inputs

- Push this switch in to accept high level RCA inputs

- Push this switch IN to connect Front and

- For fading rear fill, connect the rear RCAs from

D

Front Inputs

E After connecting Ground, Remote, and Power wires, plug in the

Powerlock

WARNING:

ground") speaker outputs, a suitable high to lo w level adapter must be used. If you
are unsure about your head unit see your local PrecisionPower dealer or call

1-800-62POWER

- Connect the front RCAs from your head unit here.

connector here.

RIGHT i npu

If you are using a source unit with bridged high powered (or "floating

.

To use Speaker Level Inputs (common ground headunits only),
connect RCA plugs to the front or rear speaker leads as shown,
and push IN the Attenuation switch.

8

BA CK TO CONTENTS

NO SOUND

TROUBLE SHOOTING

Is the LED lit?

YES

Check Input cables for signal by
connecting them straight to the
Subwoofer amplifier

ANY SOUND NOW?

YES

Problem is in the Crossover. See your
local Authorized
or call 1-800-62

SOUND IN ONE CHANNEL ONLY

Reverse left and right RCA outputs for one band (i.e. subwoofers).

OPPOSITE CHANNEL

Reverse RCA inputs

OPPOSITE CHANNEL

Reverse RCAs at head unit
(Check Balance control)

OPPOSITE CHANNEL

Problem is in the head unit

PrecisionPower

POWER

.

Dealer

SOUND IS NOW IN

SOUND IS NOW IN

SOUND IS NOW IN

Check Power and Remote turn-on wire
for voltage. Make sure Ground wire is
secure.

Problem is elsewhere in the system.
Check head unit and amplifiers.

SAME CHANNEL

Problem is in the amplifier, speakers or
associated wiring of the silent channel.

SAME CHANNEL

Problem is in the Crossover. See your
local Authorized
or call 1-800-62

SAME CHANNEL

Problem is in the RCA cables

NO

NO

PrecisionPower

POWER

Dealer

.

LOW OUTPUT FROM ONE BAND

Check crossover frequencies for Low Pass points set higher than High Pass
points, check level control setting for Sub and Rear Fill, and check gain control
on the affected amplifier(s).

STILL LOW OUTPUT - See your local Authorized
or Call 1-800-62

POWER

.

9

PrecisionPower

Dealer

BA CK TO CONTENTS

High Pass

Front

Mid Range

Front

SYSTEM ONE DIAGRAM

eject

123

4

Trk 1

5

876

BASS

VOLUME

LEFT

Source Unit

Precision

PAR-245

Volume

Power

Power

F

In-Clip

R

Fader

Defeat

Sub

PAR-245

Power

Precision

FRX-456

Inputs

L

combined

L

inputs • in

attenuation

-12dB in

R

R

rear

front

FRX-456

POWER

4 channel Amp

TREBLE

BALANCE

RIGHT

Input Sensitivity

4

Sub

Low

Low-Mid

Power

2

3

Low

High-Mid

_

Ground

Remote

TRACK

FOWARD

R

Input

1

Low-M

id

Made in USA

++++

+

Treble

PAR-245

70

36

25

16

10

+

7

+10

∞

Low Pass Gain

Power

PPI

REVERSE

L

R

Rear

Output

L

Frequency Adjust

High-M

id

Treble

Four/Five/Six Way Electronic Crossover

192
112

752
344
152

344
192
112

272

1.77K

172

80

92

118

Mid Range

492

56

Mid Bass

264

22

46

Low Pass

Sub Sonic

Subwoofer

Power

Precision

CLASS

MAR KET

ING DPT

R

Front

Output

L

PowerLED Select

USA

Made in

+

_

752
344
152

Rear Fill Level

344

7.4K

80

Tweeter

1.77K

80

Rear

Mid Range

7.4K

80

Tweeter

Front

High Pass

Rear

POWER

CLASS

4 channel Amp

Subwoofer

10

BA CK TO CONTENTS

High Pass

Front

SYSTEM TWO DIA GRAM

eject

123

4

Trk 1

5

876

BASS

TREBLE

MAR KET

PPI

ING DPT

BALANCE

TRACK

VOLUME

RIGHT

FOWARD

REVERSE

LEFT

Source Unit

PAR-245

Input

attenuation

L

R

Input

attenuation

L

R

FRX-456

Volume

Power

In-Clip

-12dB in
stereo•out
mono•in

-12dB in
stereo•out
mono•in

attenuation

-12dB in

F

Fader

Power

Precision

DEQ-230

Output

R

Power

Precision

DEQ-230

Output

R

combined
inputs • in

Precision

PAR-245

Power

R

Defeat

Sub Low

z
50 H

z

25 H

+12db-12db

.5

Power

1
3

Ground

Remote

Power

z
50 H

z

25 H

+12db-12db

.5

Power

1
3

Ground

Remote

Power

Power

Precision

FRX-456

Inputs

L

L

R

R

rear

front

POWER

R

Input

L

R

Input Sensitivity

Rear

Output

L

1

Frequency Adjust

2

3

4

Sub Low Low-Mid Treble

High-Mid

Made in USA

++++

+

Low-Mid

High-Mid

Treble

PAR-245

6.4 KH

Third Octave Equalizer

z
H

3.2 K

z

1.6 KH

+12db-12db

z

800 H

z
H
K

2

+12db-12db

z

400 H

z
H
K

1

+12db-12db

z

b
d
2
1

200 H

+

z
H
0

b

0

d
2

5

-1

+12db-12db

z

b
d

100 H

2
1
+

z
H
0

b

5

d

2

2

+12db-12db

-1

b
d
2
1

635 Hz

+

z
H

b

6

+12db-12db

d

2

2

1

-1
b
d
2

2

1

-1

+

320 Hz

z

b
d

H

2

b

3

1

d

6

+

2

-1
b
d

b

2

d

1

2

+

-1

156 Hz

z
H

b
d

b

2

d

1

2

+

-1
b
d
2

b

1

d

+

2

-1

80 Hz

b

b

d

d

2

2
1

-1

+
b
d
2

-1

40 Hz

b
d

2
1
+

EQ

b
d

2

-1

Defeat

6.4 K

Third Octave Equalizer

z

3.2 KH

z
H

1.6 K

+12db-12db

z

800 H

z
H
K

2

+12db-12db

z

400 H

z
H
K

1

+12db-12db

z

b
d
2
1

200 H

+

z
H
0

b

0

d
2

5

-1

+12db-12db

z

b
d

100 H

2
1
+

z
H
0

b

5

d

2

2

+12db-12db

-1

b
d
2
1

635 Hz

+

z
H

b

6

d

+12db-12db

2

2

1

-1
b
d
2

2

1

-1

+

320 Hz

z

b
d

H

2

b

3

1

d

6

+

2

-1
b
d

b

2

d

1

2

+

-1

156 Hz

z
H

b
d

b

2

d

1

2

+

-1
b
d
2

b

1

d

+

2

-1

80 Hz

b

b

d

d

2

2
1

-1

+
b
d
2

-1

40 Hz

b
d

2
1
+

EQ

b
d

2

-1

Defeat

Four/Five/Six Way Electronic Crossover

2
5
7

4
4
3
2
5

1
4
4
3

2
9

1

2
1
1

K

2

7

7

2

2

.7

1
7
1

0
8

2

9
8

2

1

9

1

Mid Range

0

4

7

6

5
6
3

4

5

6

2

Mid Bass

6

2

1

2

2
0
1

6

+

4

Low Pass

7

_

+10

Sub Sonic

∞

Subwoofer

Low Pass Gain

Power

er

Pow

Precision

Ground

Remote

Power

CLASS

2 channel Amp

R

F
ro

n

O

t
u
tp

u
t

L

LED Select

Power

USA

z
H

Made in

12.8 K

+12db-12db

z

z
H

K
6
1

b

d

+12db-12db

2
1
+

z

H

b

K

d

8

2

-1

20 KHz

+12db-12db

b
d

2
1
+

b
d

2
1
+

z

H

b

K

d

4

2

-1

b
d
2

-1

10 KHz

b
d
2
1
+

b
d
2
1
+

b
d
2

-1

b
d
2

-1

5 KHz

b
d
2
1
+

b
d
2
1
+

b
d
2

-1

b
d
2

-1

2.5 KHz

b

d
2
1
+

b
d
2

-1

1.27 KHz

b
d
2
1
+

Front Channel

b
d
2

-1
b
d
2
1
+

b
d

Made in

z
H

+12db-12db

H
K
4

b
d
2

-1

1.27 KHz

b
d
2
1
+

b
d

2
9
1
2
1
1

.4
7

0
8

Tweeter

Front

USA

z
H

12.8 K

+12db-12db

z

b
d
2

-1

b
d
2
1
+

2.5 KHz

b

d

2

-1

Made in

4

4

3

2

5
1
4
4
3

0

8
K

+12db-12db

z
H

K
6
1

z
H
K
8

1

+
b
d
2

-1

b
d
2
1
+

5 KHz

b

d
2
1
+

b
d
2

-1
b
d
2
1
+

USA

+

_

2
5
7

K
.4

7
0
8

Tweeter

K
7
.7
1

Mid Range

b
d
2
1
+

b
d

2

-1

20 KHz

b
d
2

1

+
b
d
2

-1

10 KHz

b
d
2
1

+
b
d
2

-1
b
d
2
1
+

b
d
2

-1

Rear Fill Level

Rear

DEQ-230

b
d
2

Rear Channel
DEQ-230

High Pass

Front

Mid Range

Front

Mid Bass

Front

High Pass

Rear

Mid Range

Rear

Subwoofer

POWER

2 channel Amp

POWER

2 channel Amp

POWER

2 channel Amp

POWER

2 channel Amp

POWER

2 channel Amp

11

CLASS

CLASS

CLASS

CLASS

CLASS

Mid Range

Front

Mid Bass

Front

High Pass

Rear

Mid Range

Rear

Subwoofer

BA CK TO CONTENTS

BLOCK DIAGRAM

SUM

-12dB INPUT ATTENUATION

RCA

Rear Input

RCA

Front Input

Input

Combine

Switch

Sub Gain

Rear Fill

Level

Sub Sonic

7Hz - 46Hz

12dB / octave

Sub

20Hz - 270Hz

24dB / octave

High Pass

55Hz - 500Hz

12dB / octave

High Pass

80Hz - 7.5KHz

12dB / octave

Low Pass

Front High Pass

High Pass

80Hz - 1.77KHz

12dB / octave

Low Pass

Front Mid Range

High Pass

80Hz - 7.5KHz

12dB / octave

Low Pass

Rear High Pass

High Pass

80Hz - 1.77KHz

12dB / octave

Rear Mid Range

High Pass Low Pass

Mid Bass

Front High Pass

Front Mid Range

Mid Bass

Rear High Pass

Rear Mid Range

Sub

12

BA CK TO CONTENTS

WARRANTY

Three-Year Limited U.S.A. Warranty

This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
workmanship under normal use and service for a period of three (3) years from the date of
original purchase when the unit is installed by an Authorized Dealer. Non-Authorized Dealer
installed products carry a one (1) year parts and ninety (90) days labor limited warranty. The
extent and conditions of Limited Warranty are as follows:

1. Authorized Dealer Installed Products:
to the original purchaser, any unit which
and under warranty, provided the defect occurs within three (3) years from the date of original
purchase when the unit is installed by an Authorized Dealer and the product is returned immedi­ately to

2. Non-Authorized Dealer Installed Products:
charge, to the original purchaser, any unit which
defective and under warranty, provided the defect occurs within ninety (90) days from the date of
purchase and the product is returned immediately to
ninety (90) days for Non-Authorized Dealer Installed Products will be for parts only and will
extend for one (1) year from the date of purchase. This warranty is not transferable.

3. The date of purchase and proof of Authorized Dealer Installation of a PrecisionPower product
must be established by an original sales receipt which must accompany the article being re­turned for warranty work.

4. This warranty shall NOT apply to any
tory serial number removed or defaced. All products received (by
ranty or out of warranty repair, with their original serial numbers removed or defaced, will NOT be
repaired and will be returned to sender, freight collect. Refer to original packaging for the serial
number of your component speakers.

5. The provisions of this warranty shall not apply to any
purpose for which it is not designed, which has been repaired or altered in any way, or which has
been connected, installed, or adjusted other than in accordance with the instructions furnished in

PrecisionPower’ s

subject to misuse, neglect, or accident.

6. PrecisionPower does not authorize any other persons to assume any other liability in connec­tion with its products. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY MADE BY
PRECISIONPOWER APPLICABLE T O ITS PRODUCTS. ANY IMPLIED WARRANTY OR MER­CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO
PRECISIONPOWER PRODUCTS IS LIMITED IN DURATION TO THE DURATION OF THIS
LIMITED WARRANTY. PRECISIONPOWER SHALL NOT BE LIABLE FOR THE INCIDENTAL,
CONSEQUENTIAL, OR COMMERCIAL DAMAGES RESUL TING FROM THE BREACH OF THIS
WRITTEN WARRANTY. Some states or provinces do not allow the exclusion or limitation of
incidental or consequential damages or limitations on how long an implied warranty lasts; so the
above limitations or exclusions may not apply to you.

7. Y our product will be serviced on an in-warranty basis within the warranty period for the correc­tion of warranted defects. If improper operation of your
contact your Authorized Dealer for assistance with the return and factory repair of your

PrecisionPower

product. If an Authorized Dealer is not available, return the unit including your name, telephone
number, return address, a copy of your sales receipt, and a description of the problem to:

TO RETURN PRECISIONPOWER PRODUCTS OUT OF WARRANTY: Return the unit, postage
prepaid, in the original protective carton. Please include a description of the problem and, if
desired, a request for an estimate of repair costs. Unless a request for an estimate is included,
the unit will be repaired as necessary. Please contact
800-62-POWER for questions concerning out of warranty repair charges. Repaired unit will be
returned with an itemized statement, C.O.D.

PrecisionPower

PrecisionPower

owner’s manual. Nor shall this warranty apply to any part which has been

warrants its products to be free from defects in materials and

PrecisionPower

PrecisionPower’ s

. This warranty is not transferable.

PrecisionPower

PrecisionPower

PrecisionPower,Inc.
Service Department

4829 S. 38th Street

Phoenix, AZ 85040-2964

will either repair or replace at no charge,

examination discloses to be defective

PrecisionPower’s

PrecisionPower

will either repair or replace at no

examination discloses to be

. Warranty claims beyond

product found to have the original fac-

PrecisionPower

PrecisionPower

PrecisionPower

PrecisionPower

product should occur,

Customer Service at 1-

product used for a

BA CK TO CONTENTS

) for in war-