Prastel MT15000-EXT-IO-M, MT15000-EXT-IO Technical Instructions

Technical Instructions
MT15000/EXT-IO
MT15000/EXT-IO-M
MT15000/EXTIO – V1.0 ENGLISH
CONTENTS
Information and Recommendations .................................................................................... 3
Specifications ........................................................................................................................ 3
1) MT15000/EXT-IO
2) MT15000/EXT-IO-M
3) COMPATIBILITY
Connection to MT15000/2 control unit ................................................................................ 4
Using a 4-Level input ............................................................................................................ 5
Setting Module Parameters in SWAMIGO3 ........................................................................ 6
Terminal block features ........................................................................................................ 7
Dear Customer, You have purchased a MT15000/EXT-IO module produced by PRASTEL France. We thank you for your interest in our products and wish you all the best with the installation procedure. PRASTEL France
ZI Athélia II, 225 Impasse du Serpolet, 13704 LA CIOTAT Cedex
Tél : 04.42.98.06.06 – Fax : 04.42.04.53.51 –
p.2/7
PRASTEL France SARL
infos@prastelfrance.fr
MT15000/EXTIO – V1.0 ENGLISH
INFORMATION AND RECOMMENDATIONS
In accordance with UTE C00-200 European Directive describing Directives 89/336EEC and 92/31 EEC,
MT15000/EXT-IO complies with the following standards:
NF EN 50081-1 on electromagnetic emissions and
NF EN 50082-1 on electromagnetic sensitivity.
o Wiring recommendations: the cables used to connect readers, network and other devices must be installed in
accordance with the instructions for Level 2, as set forth in standard NF EN 61000-4-4 (protected environment).
o This product must be installed by a qualified company. Inappropriate installation and use may entail a risk of
electric shock or fire. Please read these technical instructions before installing the product and follow assembly instructions thereof.
o All internal capacitors in the 220V version will lose charge at a healthy level after 60 seconds once power
has been turned off, under normal conditions. However, in the event of a failure, the charge may be maintained for much longer and adequate precautions are required before using the product.
SPECIFICATIONS
1) MT15000/EXT-IO
Maximum consumption ............................... 500 mA
Power voltage ............................................. 9 – 14V DC
Weight, with housing ................................... 200g
Housing dimensions ................................... 157 x 120 x 30 mm
Operating temperature ................................ - 20°C to + 50°C
Command relays ......................................... 1A / 12V – 1A / 24V
2) MT15000/EXT-IO-M
Weight, with housing ................................... 4Kg
Housing dimensions ................................... 330 x 330 x 90mm
Operating temperature ................................ - 20°C to + 50°C
Integrated 220V power supply:
Output voltage............................................. 12V
Maximum output current ............................. 5A
Battery connection ...................................... 12V, 7Ah
Command relays ......................................... 1A / 12V – 1A / 24V
3) COMPATIBILITY
MT15000/2 control unit version: V1.4 or higher SWAMIGO3 software version: V1.0.0.7 or higher To update your MT15000/2 control unit, please go to “Update” menu in SWAMIGO3, select “UTL V1.4.bin” file and check all control units to be updated.
Warning
Before doing this, make sure that your control unit is properly connected to your software (“Site Setup” menu and “Equipment Status”.
ZI Athélia II, 225 Impasse du Serpolet, 13704 LA CIOTAT Cedex
Tel.: 04.42.98.06.06 – Fax: 04.42.04.53.51 –
PRASTEL France SARL
infos@prastelfrance.fr
p.3/7
Loading...
+ 4 hidden pages