Prastel MT15000-EXT4-M, MT15000-EXT4 Technical Instructions

Technical Instructions

MT15000/EXT4

MT15000/EXT4-M

MT15000/EXT4 – V1.0 ENGLISH

CONTENTS

Information and Recommendations .............................................................................................. 3

Specifications .................................................................................................................................. 3

1) MT15000/EXT4 ..............................

2) MT15000/EXT4-M ..........................

3) PROTECTION ................................

Wiegand or Data Clock Protocol device connection .................................................................. 4

Connection to MT15000/2 control unit .......................................................................................... 5

Connecting a fail-safe electric strike and electro magnet .......................................................... 6

Connecting a standard strike ........................................................................................................ 7

Setting Module Parameters in SWAMIGO3 .................................................................................. 8

Terminal block features .................................................................................................................. 9

Dear Customer,
You have purchased a MT15000/EXT4 module produced by PRASTEL France.
We thank you for your interest in our products and wish you all the best with the installation procedure.
PRASTEL France

ZI Athélia II, 225 Impasse du Serpolet, 13704 LA CIOTAT Cedex

Tel.: [phone] – Fax: [phone] –

PRASTEL France SARL

[e-mail]

p.2/9

MT15000/EXT4 – V1.0 ENGLISH

INFORMATION AND RECOMMENDATIONS

In accordance with UTE C00-200 European Directive describing Directives 89/336EEC and 92/31 EEC,
MT15000/EXT4 complies with the following standards:

• NF EN 50081-1 on electromagnetic emissions and

• NF EN 50082-1 on electromagnetic sensitivity.

Wiring recommendations: the cables used to connect readers, network and other devices must be installed in

accordance with the instructions for Level 2, as set forth in standard NF EN 61000-4-4 (protected environment).

This product must be installed by a qualified company. Inappropriate installation and use may entail a risk of

electric shock or fire. Please read these technical instructions before installing the product and follow assembly
instructions thereof.

All internal capacitors in the 220V version will lose charge at a healthy level after 60 seconds once power

has been turned off, under normal conditions. However, in the event of a failure, the charge may be main­tained for much longer and adequate precautions are required before using the product.

SPECIFICATIONS

1) MT15000/EXT4

Maximum consumption…………………….. 400 mA

Power voltage ............................................. 9 – 14V DC

Weight ......................................................... 200g

Dimensions…………………………………….157 x 120 x 30 mm

Operating temperature ................................ - 20°C to + 50°C

Relay outputs .............................................. 1A / 12V – 1A / 24V

2) MT15000/EXT4-M

Weight, with housing ................................... 4Kg

Housing dimensions………………………… 330 x 275 x 80mm

Operating temperature ................................ - 20°C to + 50°C

Integrated 220V power supply:

Output voltage............................................. 12V

Maximum output current ............................. 5A

Battery connection ...................................... 13,6V

Relay outputs .............................................. 1A / 12V – 1A / 24V

3) PROTECTION

The module is fitted with a fuse on 12V input inside the housing. Check the fuse if the power LED does not light up
when the module is under power.

p.3/9

ZI Athélia II, 225 Impasse du Serpolet, 13704 LA CIOTAT Cedex

Tel.: [phone] – Fax: [phone] –

PRASTEL France SARL

[e-mail]