Prastel MT15000-2 User Manual

Technical Instructions

MT15000/2

MT15000/2-M

MT15000/2 – V1.0 ENGLISH

CONTENTS

Information and Recommendations ................................................................................................ 3

Specifications .................................................................................................................................... 3

1) MT15000/2 .....................................

2) MT15000/2-M .................................

3) PROTECTION ................................

Wiegand or data clock device connection ..................................................................................... 4

MT15000/EXT4 and MT15000/EXT4-M extension modules connection ...................................... 5

Connecting a fail-safe electric strike and electro magnet ............................................................ 6

Connecting a standard strike .......................................................................................................... 7

MT15000/2 control unit connection to Ethernet network.............................................................. 8

SWAMIGO3 dongle installation ....................................................................................................... 9

Terminal block features .................................................................................................................. 10

"Reset" buttons use ........................................................................................................................ 11

Dear Customer,
You have purchased a MT15000/2 control unit produced by PRASTEL France.
We thank you for your interest in our products and wish you all the best with the installation procedure.
PRASTEL France

p.2/11

ZI Athélia II, 225 Impasse du Serpolet, 13704 LA CIOTAT Cedex, France

PRASTEL France SARL

Tel : [phone] – Fax : [phone] – [e-mail]

MT15000/2 – V1.0 ENGLISH

INFORMATION AND RECOMMENDATIONS

In accordance with UTE C00-200 European Directive describing Directives 89/336CEE and 92/31 EEC,
MT15000/2 complies with the following standards:

- NF EN 50081-1 on electromagnetic emissions and

- NF EN 50082-1 on electromagnetic sensitivity.

Wiring recommendations: the cables used to connect readers, network and other devices must be installed in

accordance with the instructions for Level 2, as set forth in standard NF EN 61000-4-4 (protected environment).

This product must be installed by a qualified company. Inappropriate installation and use may entail a risk of

electric shock or fire. Please read these technical instructions before installing the product and follow assembly
instructions thereof.

All internal capacitors in the 220V version will lose charge at a healthy level after 60 seconds once power

has been turned off, under normal conditions. However, in the event of a failure, the charge may be main­tained for much longer and adequate precautions are required before using the product.

SPECIFICATIONS

1) MT15000/2

Maximum consumption ............................... 300 Ma

Power voltage ............................................. 9 – 14VDC

Weight ........................................................ 150 g

Dimensions ................................................. 157 x 108 x 30 mm

Operating temperature ................................ - 20°C to + 50°C

Relay outputs .............................................. 1A / 12V – 1A / 24V

2) MT15000/2-M

Weight, with housing ................................... 4 Kg

Housing dimensions ................................... 330 x 330 x 90 mm

Operating temperature ................................ - 20°C to + 50°C

Integrated 220V power supply:

Output voltage............................................. 12V

Maximum output current ............................. 5A

Battery connection ...................................... 13,6V

3) PROTECTION

The control unit is fitted with a fuse on 12V input inside the housing. Check the fuse if the power LED does not light
up when the module is under power.

p.3/11

ZI Athélia II, 225 Impasse du Serpolet, 13704 LA CIOTAT Cedex, France

PRASTEL France SARL

Tel : [phone] – Fax : [phone] – [e-mail]

MT15000/2 – V1.0 ENGLISH

WIEGAND OR DATA CLOCK PROTOCOL DEVICE CONNECTION

Information :

5 wires (3 pairs recommended)
Max distance : 100m
Cable type : 0,6mm (SYT advised)
Screen : Optional

Warning

Do not connect the jumper wires near other high voltage or current cables, including 220V and higher.

Note:

Each reader may support a separate technology

Example: Reader 1 in Wiegand, Reader 2 in Data Clock

WIEGAND :

o proximity reader

(PRASTEL, HID, STID, INDALA, …)
o keypad (PRASTEL, XPR, …)
o Biometric readers (PRASTEL, …)
o Radio receivers (PRASTEL, …)
o DALLAS (via interface)

DATA CLOCK :

o Magnetic strip readers
o Bar codes readers
o Proximity reader
o Radio receivers

Warning

If you use an external power supply for your
proximity readers, please be sure to connect

all different masses with the one on the
control unit.

p.4/11

ZI Athélia II, 225 Impasse du Serpolet, 13704 LA CIOTAT Cedex, France

PRASTEL France SARL

Tel : [phone] – Fax : [phone] – [e-mail]