Powerware 5110 UPS
User’s manual
©2005 Eaton Corporation
All Rights Reserved
The contents of this manual are the copyright
of the publisher and may not be reproduced (even extracts)
unless permission granted.
Every care has been taken to ensure the accuracy of
the information contained in this manual, but no liability
can be accepted for any errors or omission. The right
to make design modifi cations is reserved.
...................................................................................................................
.........................................................................................................
......................................................................................
.....................................................
..........................................................................
....................................................................................................
......................................................................................................
..................................................................................................
........................................................................................
.....................................................................................................
........................................................................................................
- Four with surge and backup protection
- Four with surge protection only
foam in the event the product must be returned to the factory for service.
ATTENTION
Although the unit may be unplugged from utility power, hazardous
voltage still may be present through the battery.”
failure).
Typical applications
Turn on the UPS.
Turn off the UPS.
will shut down completely.
the utility power is present.
When blinking, LED could indicate an overload condition or that the battery should
the jack named “out”
three LEDs to represent the following conditions:
Green Lighting
Yellow Lighting
Yellow Flashing
Red Lighting
Red Flashing
fi rmly attached to new batteries.)
Troubleshooting
Action to Take
The “Battery Backup &
the Powerware 5110 UPS
The “Battery Backup &
The Powerware 5110 UPS
The Powerware 5110 UPS will turn
want to stay powered during a
failure of utility power is plugged
The Powerware 5110 UPS
troubleshooting.
230V Models
Transfer Time to Battery/AC
Typical Backup Time
Loading...