Powersolve PME20 User Manual

AC-DC Converter

PME05/PME10/PME15/PME20 Series

www.powersolve.co.uk

5-20W Medically Approved
Encapsulated, Single Output

Features

• Universal AC Input

• Medical Safety Approved

• Isolation Class II

• Fully Isolated Plastic Case

• Cooling by Free Air Convection

• Green Design, no-load power consumption <0.5W

• Short Circuit / Overvoltage / Overload Protections

• Operating Temperature range -20°C to +70°C

• 100% full load burn-in test

Electrical Specification

Input Voltage 85-264VAC full range, 47-63Hz / 125-373VDC
AC Input Current (typ.) 0.13A @ 115VAC / 0.08A @ 230VAC (PME05)

Inrush Current 25A @ 115VAC / 45A @ 230VAC (PME05 & PME10)

Output Voltage See Table
Output Current See Table
Overload Protection >110% of rated output power. Hiccup mode, recovers automatically when fault is removed
Overvoltage Protection 115-145% (115-150% PME20) rated output voltage. Output latches off
Operating Temperature Range -20°C to +70°C. Above 50°C, derate linearly to 50% load at 70°C
Operating Humidity 20-90% RH non-condensing
Storage Temperature Range -40°C to +85°C
Storage Humidity 10-95% RH non-condensing
Temperature Coefficient ±0.03%/°C (0-50°C)
Vibration 10-500Hz, 2G 10 min/1 cycle, for 60 mins, along X,Y & Z axis
Safety Standards UL60601-1, TUV EN60601-1 / IEC60601-1 approved
Green Energy CEC Single Voltage External AC-DC & AC-AC power supplies eligibility criteria (version 1.1)
Withstand Voltage I/P-O/P: 4KVAC
Isolation Resistance I/P-O/P: 100MΩ / 500VDC
EMI Conduction & Radiation EN55011: 2007+A2 : 2007 Class B
Harmonic Current EN61000-3-2: 2006 Class A, EN61000-3-3 : 1995+A1 : 2005
EMS Immunity EN61000-4-2, 3, 4, 5, 6, 8, 11, EN60601-1-2: 2001+1: 2006 Life Supporting Equipment
MTBF 217.4kHrs compliance to MIL-HDBK-217F (PME05)

Dimensions 62.85(L) x 50(W) x 19.7(H) mm (PME05)

Weight 0.083Kg (PME05)

Notes:

1. All parameters NOT specifically mentioned are measured at 230Vac input, rated load and 25°C ambient temperature

2. Ripple and noise are measured at 20MHz bandwidth by using a 12” twisted pair wire terminated with a 0.1µF ceramic & 47µF electrolytic capacitors across the output

3. Derating is required at low input voltages. Derate linearly to 90% load at 90Vac under 100Vac input

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC Directives

0.25A @ 115VAC / 0.15A @ 230VAC (PME10)

0.35A @ 115VAC / 0.2A @ 230VAC (PME15)

0.6A @ 115VAC / 0.4A @ 230VAC (PME20)

30A @ 115VAC / 50A @ 230VAC (PME15)
30A @ 115VAC / 65A @ 230VAC (PME20)

210.2kHrs compliance to MIL-HDBK-217F (PME10)

206.3kHrs compliance to MIL-HDBK-217F (PME15)

188.3kHrs compliance to MIL-HDBK-217F (PME20)

70(L) x 50(W) x 22.7(H) mm(PME10)
75(L) x 53(W) x 22.7(H) mm (PME15)
94(L) x 56(W) x 22.7(H) mm (PME20)

0.105Kg (PME10)

0.140Kg (PME15)

0.180Kg (PME20)

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England

Tel: [phone] Fax: [phone] Email: [e-mail]

AC-DC Converter

www.powersolve.co.uk

Output Voltage and Current Ratings

MODEL OUTPUT MAX OUTPUT VOLTAGE RIPPLE & LINE LOAD POWER EFF.

PME05-05 5V 1A ±2% 100mVpk-pk ±0.5% ±1% 5W 71%
PME05-12 12V 0.42A ±1% 150mVpk-pk ±0.5% ±0.5% 5.04W 75%
PME05-15 15V 0.33A ±1% 150mVpk-pk ±0.5% ±0.5% 4.95W 75%
PME05-24 24V 0.21A ±1% 240mVpk-pk ±0.5% ±0.5% 5.04W 77%
PME10-05 5V 2A ±2% 80mVpk-pk ±1% ±1% 10W 77%
PME10-12 12V 0.83A ±1% 150mVpk-pk ±0.5% ±0.5% 9.96W 79%
PME10-15 15V 0.66A ±1% 150mVpk-pk ±0.5% ±0.5% 9.9W 80%
PME10-24 24V 0.42A ±1% 240mVpk-pk ±0.5% ±0.5% 10.08W 82%
PME15-05 5V 3A ±2% 80mVpk-pk ±1% ±1% 15W 79%
PME15-12 12V 1.25A ±1% 150mVpk-pk ±0.5% ±0.5% 15W 82%
PME15-15 15V 1.0A ±1% 150mVpk-pk ±0.5% ±0.5% 15W 84%
PME15-24 24V 0.63A ±1% 240mVpk-pk ±0.5% ±0.5% 15.12W 85%
PME20-05 5V 4A ±2% 80mVpk-pk ±1% ±1.5% 20W 77%
PME20-12 12V 1.66A ±1% 150mVpk-pk ±0.5% ±1% 19.92W 82%
PME20-15 15V 1.33A ±1% 150mVpk-pk ±0.5% ±1% 19.95W 84%
PME20-24 24V 0.84A ±1% 240mVpk-pk ±0.5% ±0.5% 20.16W 85%

Mechanical Details

VOLTAGE CURRENT TOLERANCE NOISE REG. REG. Max.

PME05 Series: 62.85(L) x 50(W) x 19.7(H)mm

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England

Tel: [phone] Fax: [phone] Email: [e-mail]

AC-DC Converter

Mechanical Details (cont.)

PME10 Series: 70(L) x 50(W) x 22.7(H)mm

www.powersolve.co.uk

PME15 Series: 75(L) x 53(W) x 22.7(H)mm

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England

Tel: [phone] Fax: [phone] Email: [e-mail]

AC-DC Converter

Mechanical Details (cont.)

PME20 Series: 94(L) x 56(W) x 22.7(H)mm

www.powersolve.co.uk

Derating Curve

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England

Tel: [phone] Fax: [phone] Email: [e-mail]