Power Acoustik PTID-7250N Owners Manual

7” Wide Touch Screen
EXACT Double-Din In-Dash Motorized TFT Monitor/DVD /AM/FM

Operating Manual

TABLE OF CONTENTS

Safety Information ….…………………………………………………………………….2
Features …………………………………………………………………………………...3
Accessories………………………………………………………………………………..4
Unit Installation………… ………………………………………………………………….5
Unit Removal …………… ………………………………………………………………….6
Wire Connection …………………………………………………………………………...7
Front Panel …………………………………………………………………………………9
Rear Panel ……………………………………………………………………………..12
Remote Control …………………………………………………………………………13

Touch Screen Operations. ….... ..............................................................................17

Touch Screen Calibrate ………………………………………………………………17
Main Menu ……………………………………………………………………………..18

Radio Operations ………………………………………………..……………............20

DVD Operations ………………………………………………………….……………23
USB Operations ………………………………………………….…………………….25
SD CARD Operations …………………………………………….…………………….25
iPod Operations ……………………………………………………….………………26
AV IN Operations …………………………………………………..………………….28
CDC Operations ………………………………………..……………..………………30

System Setup ………………………………………………………………………….32

DVD Setup Menu…………………………………………………………………....…...36

Trouble Shooting……………………………………………………………………..…...40

Specifications ………………………………………………………………….…......43

Disc Notes ………………………………………………………………………………..44

- 1 -

SAFETY INFORMATION

Please read the manual carefully before operating this unit and keep it for
future reference.

CAUTION: This unit is a class 1 laser product. To prevent direct exposure to the

laser system, do not open the unit. The laser beam may hurt your eyes.
If the unit requires adjustments, contact an authorized service centre.

USE THIS PRODUCT SAFELY

Be sure you fully understand the following safety information:

When driving

Keep the unit at an appropriate sound level. Driving with the sound at a level
preventing you from hearing sounds outside and around the car may cause an
accident.

When cleaning

Do not expose the product to water or excessive moisture. This could cause short
circuit, fire or other severe damage.

When parked

Parking in direct sunlight can result in very high temperature levels inside your car.
Let the interior and unit cool down before switching the unit on.

NOTE:

Do not use and store the player in dusty, hot or humid environment.

FUSE REPLACEMENT – WARNING!

Never replace any fuse with one of a higher value than the fuse supplied
with your unit. Using a higher current rated fuse may cause damage to
your unit and/or electrical wiring.

- 2 -

FEATURES

- Fully Motorized 4 Position Drop Screen With Last Angle Memory

- (Optional) Navigation Black Box Module With Navteq Maps Of North America

- Electronic Touch Screen Functions Include DVD, Radio, USB, & MP-3/4

- DVD/DVD-RW/CD/CD-R/CD-RW/MP-3/MP-4/Divx

- All Functions Are Displayed On Screen Via OSD (Fourteen Languages)

- 30-Second Electronic Anti-shock Mechanism

- Accessory iPod Input Connection (Cable Not Included)

- USB Mini Input For MP-3 Music, Divx, Xvid & MP-4 Movies

- SD Card Slot For MP-3 Music Or MP-4 Movies (Memory Not Included)

- Front Panel A/V Input For Audio/Video MP-3/MP-4 Players

- IR Repeater Function For External Remote Eye

- Antenna Trigger Wire

- Amplifier Trigger Wire

- Brake Screen Safety Trigger

- AM/FM With 30 Pre-sets (18/FM – 12/AM)

- Auto Store Pre-set Scan

- 4-Channel High Power 50 x 4 Channels (Mosfet Power)

- Dual RCA Outputs (Front & Rear)

- Sub Woofer Selectable Frequency Outputs (80, 120, 160Hz)

- Variable Sub Woofer Volume Control

- 1-Auxiliary Video Input For Back-up Camera

- 1-RCA Video Output

- LO/DX And Stereo Mono Selector Switch

- Electronic (Bass, Treble, Volume, Balance, Fader)

- Pre-set EQ Functions (Rock, Pop, Classic Jazz, User)

- Digital Clock

- DVD, PAL/NTSC Selectable

- USA/Europe Frequency Stepping

- Resolution: 1440 x 234

- Panel Brightness: 350NIT

- ISO/ Double DIN

- Full Function Remote Control

- Last Position DVD Memory

- Improved Graphic User Interface

NOTE:

This user's manual is only for reference.
Modifying rights are reserved.
Specifications are subject to change without notice.

- 3 -

ACCESSORIES

2 3 4 5 6 7 8

Operational Manual x 1 Mounting Sleeve x 1 USB Cable x 1

1

Bolt Steel Bar x 1 M5X5 Screws x 8

Connecter Wire x 1 Remote Control x 1 Keys x 2

9

10

iPod Cable x 1

(option)

- 4 -

UNIT INSTALLATION

Install the Mounting sleeve into the dashboard.

Install the unit into the mounting sleeve.

- 5 -

1, connect the power cable with unit.

2, press the [P.ANGLE] button to slide down the front panel.

3, turn over the unit, loose the screws.

4, press the [P.ANGLE] button to close the front panel.

NOTE

Screws are useful to protection during shipment.

- 6 -

UNIT REMOVAL

Insert the keys supplied with the unit on both sides (as illustrated) as this will
release the internal locks so you can slide the unit out.

- 7 -

WIRE CONNECTION

- 8 -

NOTE:
Brake Control

It is necessary to connect the Brake Control wire to the Hand-brake switch of the car.
While driving, the TFT monitor will display the alarm picture (see as follows) in order
to ensure the safety.

Under the Rear View Mode, the Brake Control function is no effective.

Auto Antenna Control

Connect the auto antenna control wire AUTO_ANT (see Wiring Diagram); the
antenna will lift when the unit startup; it will descend when the unit turnoff.

- 9 -

FRONT PANEL

换新的丝印图，编号 123…..不变

1. MINI USB 5. RESET 9. MENU

2. P.ANGLE 6. MIC 10. POWER / SOURCE

3. VOLUME - 7. REMOTE 11. AV IN 2

4. VOLUME + 8. MUTE

NOTE：

MIC is not effective for this unit, it is a common panel for Bluetooth function models.

- 10 -

12. EJECT 13. SD CARD SLOT

1. MINI USB

The unit will be switched to DVD Mode automatically when USB connected, and play
the songs, pictures, videos in USB.

2. [P.ANGLE/OPEN/CLOSE]

Press the button to open/close the monitor.
Hold pressing the button to adjust the angle of the front panel as following:
Angle 1 - Angle 2 - Angle 3 - Angle 4 - Angle 1

TFT Viewing Angle Calibrate
When “Power Off”, press the buttons 1, 2, 3, [BAND/ENTER] of remote control;
Then the monitor should display ‘TFT ANGLE CALIBRATE”;
The motor and gear drives are now back to their factory positions.

3. [VOLUME-] / 4. [VOLUME+]

Press to increase / decrease the volume.

- 11 -

5. [RESET]

Press the button to switch back to all the original factory settings.
Keep in mind this will erase all your preset radio stations and any EQ settings you
may have made and saved.

7. REMOTE

Infrared Remote Receiver

8. [MUTE]

Press the button to switch off the sound; press it again to resume to the previous
volume level.

9. [MENU]

Press to return to the main menu.

10. [POWER/SOURCE]

Press the button to turn the unit ON;
Hold on pressing the button to turn the unit OFF.
When the unit in turned ON, press the button to toggle between the different modes
as following:

RADIO – DVD – USB – SD – IPOD – CDC – AV IN – RADIO

NOTE:

The unit could be switched to DVD Mode if disc inside;
The unit could be switched to USB Mode if Mini USB connected;
The unit could be switched to SD Mode if SD / MMC Card connected;
The unit could be switched to iPOD Mode if iPod connected;

11. AV IN 2

Connect an external audio/video device to this jack to watch to the device through
your car video system.

12. [EJECT]

When flip down the front panel, press to eject / load a disc.

13. SD CARD SLOT

The unit will be switched to DVD Mode automatically when SD card inserted, and
play the songs, pictures, videos in USB.

- 12 -

REAR PANEL

14. RADIO ANTENNA, IPOD MINI DIN & IR REPEATER ADAPTER

15. CDC ADAPTER

16.16PIN SOCKET

17. VIDEO AUDIO OUTPUT & INPUT

- 13 -