Polti VAPORETTINO LECOASPIRA 700 User Manual
QQ
QQ
W1 X
Y
B3
B2
WW
WW
Z
C
T
E1
C
F
E2
E1
D
C
E
E3
E4
Q M
K
R
S
J
C
L
A2
B3
B1
B2
A5
A1
A4
A3
U
P
O
C
N
V
E5
G
24
25
26
12
7
8
6
10
9
11
23
17
2 1
4 5 3
27
13
14
15
16
18
19
22
20
ENGLISH
Polti S.p.A. reserves the right to change
equipment or accessory specification without
prior notice.
KEY TO ACCESSORIES
A1) Fitting for connecting accessories
A2) Handle
A3) Safety button
A4) Suction button
A5) Steam button
B1) steam+suction hose
B2) Monobloc plug
B3) Locking button of the monobloc plug
C) Button for locking accessories in place
D) Flexible steam + suction tube
E) Universal brush
E1) Slides for locking fittings into place
E2) Bristled accessory
E3) Liquid-suction accessory
E4) Carpet accessory
E5) Cotton cloths
J) Steam-suction window-cleaning accessory
K) 120° steam-suction accessory
L) Small coloured 120° steam-suction brushes
M) 120° steam-suction accessory
upholstery nozzle
N) Small steam-suction upholstery nozzle
O) Window-cleaning fitting for small
steam-suction upholstery nozzle
P) Bristle fitting for small steam-suction
upholstery nozzle
Q) Upholstery nozzle
R) Nozzle
S) Radiator brush
T) Cleaning brush
U) Filler bottle
V) Spare gaskets
OPTIONAL ACCESSORIES
F) Joker brush
G) Parquet accessory
W) Iron
W1) Continuous steam button
X) Steam request button
Y) Temperature control knob
Z) Iron mat
KEY
1) Main switch
2) Boiler switch
3) Lamp indicating lack of water
4) Pressure indicator lamp
5) Suction UP indicator lamps
6) Carrying handle
7) Safety cap
8) Steam control knob
9) Flap of the built-in socket
10) Built-in socket
11) Air outlet grill
12) Pivoting wheels
13) Power supply cable
14) Supply cable canal
15) Supply cable storage
16) Accessories holder
17) Air outlet filter
18) Unhooking lever for air outlet filter
19) Air outlet filter holders
20) Water container
21) MAX level (fig.5)
22) Water container handle
23) “EcoActive Filter” water-based
filter assembly
24) Lid of the “EcoActive Filter”
water-based assembly
25) Shaped filtering sponge
26) Filter body with microholed net
27) Elbow tube
This unit conforms with EC-directives 89/336 as amended by 93/68
(EMC) and 73/23 as amended by 93/68 (low voltage).
ENGLISH
CCCCOOOORRRRRRRREEEECCCCTTTT UUUUSSSSEEEE OOOOFFFF TTTTHHHHEEEE PPPPRRRROOOODDDDUUUUCCCCTT
TT
This appliance is intended for use as a steam generator and
for sucking liquids and solids as described and in
accordance with the instructions provided in this manual.
Please read these instructions carefully and keep them, as
you may find them useful in future.
PPPPRRRREEEEPPPPAAAARRRRAAAATTTTIIIIOOOONNNN FFFFOOOORRRR UUUUSSSSEE
EE
• Unscrew the patented safety cap (7) (Fig.1) and fill the
generator with 1,3 litres of normal tap water, using the
special anti-drip filler bottle (U).
• Carefully screw on the safety cap (7) to hand tight.
• Lift the water container handle (22) unhooking it from its
position (Fig. 2) and remove the container (20) (Fig. 3)
• Turn the container handle (22) as indicated in figure 4, so
as to remove the “Eco ActiveFilter” water filter assembly
(23).
• Fill the water container (20) with about 1,2 litres of simple
tap water until the MAX level indicator (21) is reached, as
in fig. 5.
• Put the filter assembly (23) back into place in the water
container (20) returning it to its initial position.
• Replace the water container back into position.
• Support the handle (22) until it hooks into its place on the
water container (20).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
MAX
ENGLISH
OOOOPPPPEEEERRRRAAAATTTTIIIIOOOONN
NN
Operation with steam + suction
Connect the plug to the mains.
• Press the main switch (1), the first level of suction indicators (5) will start to flash.
• Press the boiler switch (2) which will light up.
• Wait for the pressure indicator lamp (4) to light up. When it does the Vaporetto Lecoaspira will be ready to generate steam.
• Open the flap of the built-in socket (9); fit the monobloc
plug (B2) into place by pressing the locking button (B3)
(Fig. 6).
Note: The handle (A2) has a safety button (A3) which
when set in worked position prevents activation of the delivery of steam. If the appliance is left temporarily unattended while it is in an activated condition, please remember
to place the safety button (A3) in the locked position.
To resume delivery, return the button to its initial position.
• Press the suction button (A4) on the handle (A2). The suction function will start up at
the minimum speed and the first stage of the indicator lamp set (5) will stop flashing
and remain on. For correct use of the suction function read the section “Suction control/switching off”.
• You can supply steam by pressing the steam button (A5) on the handle. At the same
time you can also control suction by pressing the suction button (A4).
Operation with suction only
• If you wish to use the suction function only, press the main switch (1), the first level of
the suction indicators (5) will start to flash.
• Open the flap of the built-in socket (9); fit the monobloc plug (B2) into place by pressing
the locking button (B3) (Fig. 6).
• By pressing the suction button (A4) on the handle (A2), the suction fan will start to run
at the lowest speed and the first stage of the indicator lamp (5) will stop flashing and
remain steadily lit. For correct use of the suction read the section “Suction control/switching off”.
Operation with steam only
• Press the main switch (1), the first level of the suction indicators (5) will start to flash.
• Press the boiler switch (2) which will light up.
• Wait for the pressure indicator lamp (4) to light up. When it does, the Vaporetto Lecoaspira will be ready to generate steam.
• Open the flap of the built-in socket (9); fit the monobloc plug (B2) into the socket by pressing the button (B3) (Fig. 6)
• You may now deliver steam by pressing the steam button (A5) on the handle.
• If you decide not to use the steam anymore, you may switch off the boiler by pressing
the boiler switch (2).
Fig. 6
Loading...