RM8000T
RM50T
Floorstanding Loudspeaker
RM SERIES
Owner’s
Manual
FEATURES:
PAR T DESCRIPTION:
TOL:
• Stylishly curved speaker constructed of heavy duty, non-resonant Anodized Aluminum and MDF : a beautiful
complement to today’s state-of-the-art AV electronics.
• Dynamic Balance® composite driver technology yields wider range and lower distortion, for lifelike sound.
• Patented Power Port venting technology for low noise, low distortion, high output bass.
1" silk dome tweeters with neodymium magnets for clear, detailed highs.
•
• Curved cabinet shape and angled internal baffles break up standing waves for superior midrange clarity. Hear all the music
as it was intended to be heard – clearly.
• Anti-diffraction grilles minimize grille diffraction for spacious, 3-dimensional imaging.
• Mylar capacitors in the crossovers extend high frequency response and improve detail and transparency.
• Dual, bi-ampable 5-way binding post inputs for the most secure connections and the most versatile wiring options.
• Magnetic shielding allows safe placement near your state-of-the-art TV or video monitor with no risk of video distortion .
SAFE LIMITS OF OPERATION
Your Polk Audio Loudspeakers are constructed of the highest quality materials for years of trouble-free performance. However, damage
to loudspeakers can occur when an amplifier, regardless of its wattage, is made to play at higher listening levels than its power can clearly
produce. This is usually beyond the “noon or 1 o’clock” position on the volume control. Operation at this level can result in very high levels
of audible distortion originating in the amplifier, which can add a harsh, gritty sound to your listening material. If you hear distortion,
TURN IT DOWN. Contrary to popular belief, a speaker is more likely to be damaged by trying to get too much volume from a low-powered
amplifier or receiver than from a high-powered one.
FIGURE 1FIGURE 2
FIGURE 1
Create an equilateral triangle between the speakers and the listening position.
RM Series Loudspeakers are magnetically shielded for safe placement near TV or video monitors.
If you notice video distortion or discoloration, immediately move the speakers away from the video
source and call Polk Audio Customer Service 800-377-7655 (US and Canada) or polkcs@polkaudio.com.
Haga un triángulo equilátero con los altavoces y la posición de audición. Polk Audio: 410-358-3600.
Créez un triangle équilatéral entre les enceintes et la position d’écoute. Polk Audio: 410-358-3600.
Bilden Sie ein Dreieck zwischen den Lautsprechern und Ihrer Hörposition. Polk Audio: 410-358-3600.
Disponete ai vertici di un triangolo equilatero i due diffusori acustici, sinistro e destro, e il punto d'ascolto ottimale.
I diffusori RM hanno altoparlanti con magneti schermati e si possono avvicinare tranquillamente a televisori e
monitor. Se notate immagini distorte o alterazioni dei colori, allontanateli subito dallo schermo video e contattate
il nostro Client Care Center: 410-358-3600 o polkcs@polkaudio.com.
FIGURE 2
Spike feet for stability on carpet or hard floors.
Use púas para estabilizar en una alfombra.
Pour plus de stabilité sur tapis, utilisez les pieds.
Für Stabilität auf Teppich Gebrauch Füße.
Per la stabilità sulla moquette, usate i piedi.
TECHNICAL ASSISTANCE OR SERVICE
If, after following the hookup directions, you experience difficulty, please double-check all wire connections. Should you isolate the problem
to the speaker, contact the authorized Polk Audio dealer where you made your purchase, or contact Polk Audio Customer Service
800-377-7655 (M-F, 9-6 EST, US & Canada only) or via email polkcs@polkaudio.com. Outside the US & Canada, call 410-358-3600.
More detailed information, including audio how-to articles, FAQs, and online manuals, is available on our award-winning website www.polkaudio.com/home.
BUY DIRECT FROM POLK AUDIO
We can recommend a slew of audiophile accessories to help you get more performance from your system. For high quality speaker stands that match our
speaker finishes, wall-mount brackets, system enhancing accessories, exclusive Polk Audio logowear and more, visit our WebStore: http://shop.polkaudio.com.
FIGURE 3
Loosen hex nut
osque par
Desenr
la tuerca hexagonal
Desserrer l’écrou
Sechskantmutter lösen
Allentate il dado
esagonale
cialmente
e
t speaker wir
Inser
through hole
Inserte el alambre para
la bocina en el orificio
Insérer le fil du haut-parleur dans
le trou
Lautsprecher-Draht durch das
Loch schieben
o
Inserite nel for
i conduttori del cavo
per altoparlanti
Tighten hex nut
ca
osque la tuer
Enr
de nuevo
Serrer l’écrou
Sechskantmutter festschrauben
Stringete il dado
esagonale
Do not insert insulated
section of speaker wire
No inserte alambre con
material aislante
Ne pas insérer la partie
isolée du fil du haut-parleur
Isolation des LautsprecherDrahtes nicht in das Loch schieben
Non inserite nel foro una
porzione di cavo isolato
FIGURE 3
Using binding post connections.
Uso de conexiones con tornillos de presión.
Utilisation des bornes de branchement.
erwendung von Anschlussklemmen.
V
Uso dei morsetti a vite.
o use Banana Plugs
T
(US only):
Carefully pry out the binding post plugs
to expose banana plug holes.
(This is for US owners only.)
Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com
e information visit our website at www.polkaudio.com
For mor
FIGURE 4
FIGURE 5
FIGURE 6
FIGURE 4
Basic Hook-up, recommended for most systems.
BASS MANAGEMENT SETTINGS: Front = Large
Recomendada para la mayoría de los sistemas.
PARÁMETROS DE CONTROL DE BAJAS FRECUENCIAS: Front = Grande (Large)
Recommandée pour la plupar
Réglages: (Bass Management Settings) Front (avant) = Large
Empfohlen für die meisten Lautsprecher.
EINSTELLUNG DER TIEFENTONLAGEN: Vorne = Groß
POWER AMPLIFIER = amplificatore finale, integrato, o sintoamplificatore
Schema di base per il collegamento dei diffusori acustici RTi.
t des systèmes.
FIGURE 5
Bi-wiring, or using separate speaker wire connections
for high and low frequency sections. Remove flat metal jumpers.
Bicableado, o uso de conexiones de cables de altavoz
separadas para las secciones de alta y baja frecuencia.
Bi-câblage: l’utilisation de câbles distincts pour brancher les
composantes des hautes et des basses fréquences de vos enceintes.
V
erwendung von unterschiedlichen Kabelverbindungen
für hohe und niedrige Frequenzen.
POWER AMPLIFIER = amplificatore finale, integrato, o sintoamplificatore.
Schema di collegamento mediante due cavi separati (“bi-wiring”): ciascuna
delle due sezioni, passa-alto (alte frequenze) e passa-basso (basse frequenze),
del filtro d’incrocio del CSi40 è collegata all'amplificatore mediante un cavo dedicato.
FIGURE 6
Bi-amping, or using separate amplifiers for the low and high frequency sections of your speakers.
Remove flat metal jumpers.
Biamplificación, o uso de amplificadores separados para las secciones de baja y alta frecuencia
de los altavoces.
Bi-amplification: l’utilisation d’amplis distincts pour alimenter les composantes des hautes et des
basses fréquences de vos enceintes.
Verwendung von unterschiedlichen Verstärkern für niedrige und hohe Frequenzen der Lautsprecher.
LOW FREQ. AMPLIFIER = amplificatore finale per la sezione bassi
HIGH FREQ. AMPLIFIER = amplificatore finale per la sezione alti
Schema di collegamento a due amplificatori separati (“bi-amping,” doppia amplificazione): uno dedicato alla sezione passa-alto (alte frequenze), l'altro a quella
passa-basso (basse frequenze) del filtro d'incrocio del CSi40. Notate che i morsetti superiori del diffusore acustico appartengono alla sezione alte frequenze del
filtro (ndt.).
SPECIFICATIONS*
R M8000T/RM50T
TRANSDUCER COMPLEMENT:
4 - 4 1/2"(11.25cm) mid-bass driver
1 - 1"(2.5cm) tweeter
OVERALL FREQUENCY
RESPONSE:
42Hz - 26kHz
-3dB LIMITS:
55Hz - 25kHz
RECOMMENDED
AMPLIFICATION:
20-200 Watts/channel
IMPEDANCE:
Compatible with 8 ohm output
EFFICIENCY @ 2.83 Vrms DRIVE LEVEL:
90dB
DIMENSIONS:
45.1" H* x 6.2" W x 7.9" D
114.6cm H x 15.8cm W x 20cm D
*Add .6" inches (1.5 cm) to height
for floor spikes.
BASE DIMENSIONS:
9.6" W x 13.4" D
24.4cm W x 33.9cm D
SHIPPING WEIGHT:
42 lb, 19.05 kg
*All specifications subject to
change without notice.
FIGURE 7
Clean aluminum finish and composite endcaps with a damp cloth.
Do not use fur
FIGURE 7
Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com
Cuidado del acabado de madera natural.
Entretien de la finition en bois véritable.
Pflege der Holzappretur.
Non impiegate prodotti lucidanti per mobili
sulla finitura, ma spolveratela soltanto con
un panno umido.
e polish on aluminum finish and composite endcaps.
nitur
e information visit our website at www.polkaudio.com
For mor
LIMITED FIVE YEAR WARRANTY
Polk Audio, Inc., warrants to the original retail purchaser only. This warranty will terminate automatically prior to its stated expiration if the original retail purchaser sells or transfers
the Product to any other party.
Polk Audio, Inc., war
Product will be free from defects in material and workmanship for a period of five (5) years from the date of original retail purchase from a Polk Audio Authorized Dealer.
thermore, Polk Audio, Inc., warrants, to the original retail purchaser only, that any AMPLIFIER OR OTHER ELECTRONIC COMPONENT that may be included in this Polk Audio Loudspeaker Product
Fur
will be free from defects in material and workmanship for a period of three (3) years years from the date of original retail purchase from a Polk Audio Authorized Dealer.
o allow Polk Audio to offer the best possible warranty service, please register your new product online at: www.polkaudio.com/registration or call Polk customer service 800-377-7655
T
in the USA and Canada (outside the USA: 410-358-3600) within ten (10) days of the date of original pur
Defective Pr
Suite A, San Diego, Califor
is to be borne by you. If upon examination at the Factory or Polk Audio Authorized Dealer it is determined that the unit was defective in materials or workmanship at any time during this Warranty period, Polk
Audio or the Polk Audio Authorized Dealer will, at its option, r
Products replaced or repaired under this warranty will be returned to you, within a reasonable time, freight prepaid.
ranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs
This war
in excess of the rated maximum of the unit, cosmetic appearance of cabinetr
of the Product which has not been authorized or approved by Polk Audio. This warranty shall terminate if the Serial number on the Product has been removed, tampered with or defaced.
ranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement
This war
as provided above. In no event will Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc. or a Polk Audio
Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other par
limitation and exclusion may not apply to you.
All implied war
limitations may not apply to you. This W
This Warranty applies only to Products purchased in Canada, the United States of America, its possessions, and U.S. and NATO armed forces exchanges and audio clubs.
arranty terms and conditions applicable to Products purchased in other countries are available from the Polk Audio Authorized Distributors in such countries.
The W
rants, to the original retail purchaser only, that the LOUDSPEAKER(S), PASSIVE CROSSOVER COMPONENT(S) and ENCLOSURE on this Polk Audio Loudspeaker
chase. Be sure to keep your original purchase receipt.
oducts must be shipped, together with proof of purchase, prepaid insured to the Polk Audio Authorized Dealer from whom you purchased the Product, or to the Factory at 2550 Britannia Boulevard,
nia 92154. Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in transit
epair or replace this Product at no additional charge, except as set forth below. All replaced parts and Products become the property of Polk Audio.
y not directly attributable to defect in materials or workmanship, or service, repair, or modification
ty. Some states do not allow the exclusion or limitation of consequential damages, so the above
ranties on this Product are limited to the duration of this expressed Warranty. Some states do not allow limitation on how long an implied Warranty lasts, so the above
arranty gives you specific legal rights, and you also may have other rights which vary from state to state.
NOTES
Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com
For more information visit our website at www.polkaudio.com
5601 METRO DRIVE
BALTIMORE, MARYLAND 21215
800-377-7655 (US & CAN, OUTSIDE US 410-358-3600)
WWW.POLKAUDIO.COM
“Polk Audio,” “The Speaker Specialists,” “Dynamic Balance” and “Acoustic Resonance Control” are
registered trademarks of Polk Investment Corporation used under license by Polk Audio Incorporated.
RM8006-1
Loading...