the speaker specialists
®
TC60i
the speaker specialists
®
TC80i
TC65i
TC265i
TCi SERIES
TIMORE, MAR
BAL
800-377-7655, F
RM0566-2
5601 METRO DRIVE,
YLAND 21215, USA,
AX: 410-764-5266
www.polkaudio.com
Owner’s
Manual
High
Performance
In-Wall
Speakers
PLACEMENT OPTIONS
Polk Audio TCi Series In-Wall Loudspeakers
give you nearly endless placement options.
But remember that placement choice for your
in-wall speakers bears careful consideration,
as installation requires that you cut a hole in
your wall or ceiling!
Fill a room with sound by installing in-wall
speakers in nearly any wall or ceiling
location [
figure 1]. Polk TCi Series In-Wall
Loudspeakers have a wide dispersion pattern
and aimable tweeters that allow you to focus
their sound.
ADJUSTING THE TWEETER
Aiming the tweeter toward your listening
position improves imaging and detail. When
using TC
front/main home theater speakers
i Series In-Wall Loudspeakers as
[figure 2],
aim the tweeter toward your listening position. For rear/surround speakers installed in
walls or ceilings [figure 3], aim the tweeter
toward the nearest reflecting surface (an
adjacent wall or ceiling) for a more diffuse
sound field (if you so desire; for more
direct sound, aim the tweeters at your
listening position).
FIGURE 1
TCi Series audio and A/V placement
options, in wall or ceiling.
Opciones de ubicación al ras de la pared o del cielorraso para equipo
audiovisual y de audio de la Serie RC.
Recommended measurements for HT front stage placement.
Platzierungsmöglichkeiten für RC-Systeme in Wand oder Zimmerdecke
(Audio und kombinier
tes Audio/Video)
FIGURE 2
Recommended measurements
for HT front stage placement.
Medidas recomendadas para la ubicación
en el escenario del cine en casa.
Mesures recommandées pour l'installation
des haut-parleurs avant.
Empfohlene Abmessungen für die Platzierung
in Heimtheatern (Frontbeschallung).
For Customer Service, call 800-377-7655.
2
Performance enclosures are available for all
models. These are engineered enclosures that
mount in the wall or ceiling to maximize the
bass and midrange performance of your TCi
Speakers. They are typically installed prior to
drywalling in new construction, but can be
retrofitted if desired.
Get more information about performance
enclosures: polkaudio.com/catalog/technology.
Note: TC
i Series In-Wall Loudspeakers are
not magnetically shielded and should not
be placed closer than 1’ (30cm) from a
direct view television or video monitor. Test
your distance BEFORE INSTALLATION by
simply holding the speaker in the place you
plan to install it, and seeing how it affects
any TVs or video monitors nearby. If your
monitor experiences discoloration or distortion, immediately move the speaker a little
farther away.
DIRECTING THE DRIVER (TC60i & TC80i)
The fixed 15° angled driver in the ceiling
speaker allows you to direct the midrange
towards your listening area when used for
front stage (left–center–right). When used as
rear surrounds or 6.1 or 7.1 back speakers,
direct the driver towards the listening area
for a more direct sound field or toward a
wall for a more diffuse soundfield.
AIMING THE TWEETER
TCi models feature a swiveling Dome Tweeter
for better directionality. The “sweet spot” is
within a 30º cone of sound coming from the
aimed speaker. [figure 4]
MAKING
ADJUSTMENTS
The TCi Series features technology that can
tailor the sound for performance in difficult
or unusual placement situtations.
TC265i, TC65i, TC80i & TC60i MODEL
ADJUSTMENTS:
Wall Distance Toggle — In-wall loudspeakers excel when placed more than 2’
(60cm) from side walls [figure 5]. If position
limitations demand that in-wall loudspeakers
be installed closer than 2’(60cm) from side
walls, the proximity of the surface can result
in a response “bump” between 50 and 200Hz.
This can cause in-wall speakers to sound
“boomy.” The Distance Toggle Switch flattens
response and tunes out “boominess” without
sacrificing deep bass response, for more lifelike sound.
FIGURE 3
Examples of in-wall and in-ceiling placement. When used as rear/surrounds, aim
tweeter toward the nearest reflecting sur
more diffuse sound field.
Ejemplos de ubicación al ras de la pared o del cielorraso. Cuando se use como
altavoz posterior o surround, oriente el tweeter hacia la superficie reflectora
más cercana (pared o cielorraso adyacente) para producir un campo de sonido
más difuso.
Exemples d'installations au mur et au plafond. Pour usage arrière-ambio
phonique, dirigez les tweeters vers la surface réfléchissante la plus proche (mur
ou plafond) si vous
désirez une image sonore plus diffuse.
Beispiele zur Platzierung in Wand und Zimmerdecke. Bei Verwendung als
Hintergrund-/Surround-System sollten die Hochtonlautsprecher zur besseren
Zerstreuung des Schallfelds
in Richtung der nächstliegenden reflektierenden Flächen
positioniert werden (Wand oder Zimmerdecke).
Get more information and exclusive accessories, visit www
3
face (an adjacent wall or ceiling) for a
FIGURE 4
To aim the TCi Tweeter, use your fingers to gently manipulate the outer ring of
the tweeter cup, pushing lightly one way or the other to tilt the tweeter, until it is
aimed in the direction of your listening position.
Para apuntar el T
exterior del tweeter empujando ligeramente hacia uno y otro lado hasta que el
tweeter apunte hacia la posición del oyente.
Pour orienter le haut-parleur d’aigus à TCi, manipuler doucement avec les
doigts l’anneau externe du haut-parleur d’aigus en poussant légèrement dans
-
un sens ou dans l’autre pour incliner le haut-parleur, jusqu’à ce qu’il soit orienté
vers la position
d’écoute.
Um den TCi T
Tweeters vorsichtig mit Ihren Fingern. Drücken Sie zur Schrägstellung des
weeters leicht auf die eine oder andere Seite, bis er auf Ihre Hörposition aus
T
gerichtet ist.
weeter TCi, manipule cuidadosamente con los dedos el anillo
weeter auszurichten, manipulieren Sie den äußeren Ring des
.polkaudio.com
FIGURE 5
If placement is closer than 2' to a wall, engage the W
Dist.”) to match the <2' setting.
En cas de positionnement à moins de 5 cm (2 pouces) du mur, mettre le commutateur de distance par rappor
Si el altavoz queda a menos de 61 cm (2 pies) de la pared, fije el interruptor
basculante de distancia a la pared (“W
Wenn der Wandabstand weniger als 60 cm (2 Fuß) beträgt, schalten Sie den
Wandabstandsschalter (“Wall Dist.”) ein, um mit der Einstellung <2’. übereinzustimmen.
-
t au mur (“Wall Dist.”) dans la position < 2’.
all Dist.”) en la posición <2’.
all Distance T
oggle (“W
all
For Customer Service, call 800-377-7655.
4