Digital Photo Picture Frame
User’s Manual
20070704
Controls and Basic Instructions
Set Up and Navigation
CONGRATULATIONS on your purchase of a Polaroid digital photo frame. Please read carefully
and follow all instructions in the manual and those marked on the product before fi rst use. Failing
to follow these warnings could result in personal injury or damage to the device. Also, remember to
keep this User’s Manual in a convenient location for future reference.
Important: Save the original box and all packing material for future shipping needs.
Controls
AUTO:
Press & Hold (under normal mode):
Automatically adjusts the position of the display area of the LCD screen.
Press (under “Display Screen Adjustment Menu”): Exit.
AUTO
MENU:
Press (under normal mode): Enter into “Display Screen Adjustment Menu”.
MENU
Press (under “Display Screen Adjustment Menu”): Select items in the menu.
UP ARROW
V
Press (under normal mode): Increase music volume
Press (under “Display Screen Adjustment Menu”): Move up or go to previous
DOWN ARROW
V
Press (under normal mode): Decreases music volume
Press (under “Display Screen Adjustment Menu”): Move down or go to next
POWER: Turns power on/off
Installing a Flash Media Card
AV Out
AV Out
Power
Power
SM Card
SM Card
USB Port
USB
1. Find the slot that fi ts your fl ash media card.
2. Insert the card in the correct slot.
3. To remove the card, simply push it in slightly
until it springs back out. Remove.
MS/SD/MMC Card
CF/MD Card
CF/MD Card MS/SD/MMC Card
Controls and Basic Instructions
Replacing the Remote Control Battery
1. Remove the battery compartment by pulling the cover in the direction
of the arrow.
2. Remove old battery and dispose of correctly.
3. Insert new battery taking note of correct polarity (+/-).
4. Replace cover.
Caution:
1.Only use a 3V CR2025 battery.
2.Dispose of used batteries according to local ordinance regulations.
3.Remove the battery when not using the Flash Player for prolonged periods.
Buttons on the Remote Control
POWER button Press to turn player on or off.
SETUP button Press to open menu for changing settings.
CARD SELECTION button Press to choose a different memory card.
MUSIC button Press to go to and display music fi les.
PHOTO
ROTATE
ZOOM button Press to zoom up to 4x (on photos only)
SLIDESHOW button Press to start/stop a photo slideshow
+ VOLUME button Press to increase volume
- VOLUME button Press to decrease volume
MUTE button Press to instantly mute volume
↑ button Press to move up when selecting fi les on your screen.
button Press to go to and display photo fi les.
button Press to rotate photos 90 degrees clockwise on screen
button Press to move left when selecting fi les on your screen.
←
►║ PLAY/PAUSE
screen.
→ button Press to move right when selecting fi les on your screen.
↓
button Press to move down when selecting fi les on your screen.
STOP
button Press to stop the selected fi le/action.
button Press to play/pause or confi rm selections on your
Set Up and Navigation
Setting up the Digital Picture Frame
1. Plug the appropriate end of the AC adapter into a power outlet and the other end into the Digital Picture Frame.
2. After you’ve stored content on a fl ash media card (not included), insert the card into the proper slot.
3. Turn the power switch to “ON”. As a default the fi rst fi le of the card will be displayed fi rst. Play sequences are
automatically sorted alphabetically by fi le name, regardless of fi le type.
Navigating in the Digital Picture Frame
Next Previous Pause/Play
Zoom Information On/Off Return to Previous
1. Turning the Digital Picture Frame
on will initiate a photo slideshow
with music, provided the inserted
memory card has music and
photo fi les.
2. Pressing the play/pause button
on the remote will give you play
options. Use the LEFT or RIGHT
keys to make your selection.
3. Press the Return key, then press the play/pause button on the remote to
enter the Photo Thumbnails Screen shown to the right:
Rotate
Music and Photo Slide Show
4. Pressing the play/pause button on the remote will give you the screen icon
shown to the right. Your photos will be displayed in a slideshow.
5. Press the Return key, then
press the play/pause button
on the remote to enter “Select
Function” menu shown to
the right:
Connecting to the Digital Picture Frame
Connecting a USB Device to the Digital Picture Frame
1. The Digital Picture Frame has a built-in mini-USB port. If the USB device (such as a USB fl ash drive or
digital camera) you would like to connect to the Digital Picture Frame has a full-size port, use the
“USB Connection Cable” included with the digital picture frame.
This included cable has a male mini-size USB port and a female full-size USB port.
2. It is recommended that you turn off your USB device and the Digital Picture Frame before connecting the
USB device.
3. This Digital Picture Frame cannot be connected to a computer.
Copy, Delete, Format
You have the ability to copy and delete fi les on the internal NAND FLASH, copy fi les between memory cards and the
internal NAND FLASH, between different memory cards and between folders in one memory card.
Attention: Even though you can copy fi les from a CF card, you will not be able to copy fi les to a CF card. Also the internal NAND
FLASH cannot be formatted.
Copying fi les from an SD Card to the internal NAND FLASH
1. Enter the PREFERENCES PAGE
and switch FILE EDITING setting ON.
2. Return to MAIN MENU, and select the target disk (NAND FLASH).
3. Return to MAIN MENU Select FILE Navigate to DEVICE as root directory.
Use LEFT or RIGHT buttons on remote control to select and press.
(For this operation, the fi le will be copied to the root directory of internal
NAND FLASH. Users could select other directories under the root to copy).
Set Up and Navigation
4. Return to MAIN MENU, and select a source disk.
5. Return to MAIN MENU. Select FOLDER. Enter and select a fi le. Select and press
to copy. Then, the copied fi le can be found in NAND FLASH.
Deleting Files
Enter SD card or NAND FLASH. Select a fi le you wish to delete.
Use LEFT or RIGHT buttons to select and press select YES or NO
in the dialog box.
Formatting the internal NAND FLASH
Enter MAIN MENU, select SETUP, and enter PREFERENCES, then select
NAND FLASH to format it.
Recycling
WEEE:
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly,
have potential adverse effects on the environment and human health. Presence of this label on the product means it
should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for
ensuring that this product is disposed of properly. To fi nd out how to properly dispose of this product, please go to
www.polaroid.com and click on “Company“ or call the customer service number for your country listed in the
instruction manual.
“Polaroid” and “Polaroid and Pixel” are trademarks of Polaroid Corporation.
For service, support and warranty information, visit www.polaroid.com.
Loading...