
Quick Start Guide
Prestigio Roadrunner 540
Quick Start Guide
Road Ranger C201
1. Polaroid Driving Recorder

Quick Start Guide
Prestigio Roadrunner 540
Quick Start Guide
Road Ranger C201
3. Power on/Power off
Position the device in the vehicle using the suction mount or 3M
mount and press the Power button to turn it on. To power off the
device press the button with 3 seconds.
You can also connect the device to the car power adapter. It will
automatically turn on and start recording when the car engine starts.
When the engine stops, the device will automatically save the last file
and turn off.
4. Charging
Using the car changer: Connect the device to the car charger. The
device will start charging after the car engine is turned on. The device
will automatically turn on and start recording. When the engine stops,
the device will automatically save the last file and turn off.
Normally it takes approximately 2-3 hours to fully charge the device.
Operating the device while charging with the AC adapter may extend
the time of full charge.
5. Inserting the SD-card
Before starting video recording, please insert a SD card (not included)
into the SD card slot in the device.
To extract the SD card slightly push it inside the device, and remove.
Note:
After inserting the SD card the device will automatically recognize it
as default storage and all the data will be saved on this card.
6. Recording
To start recording make sure the Video Mode is selected. Press the
Record button to start recording. The recorded files are saved on SD
Card. To stop recording, press Record button again or stop the car
engine if the device is connected to the car charger.
With car charger connected the device will automatically turn on and
start recording.

Quick Start Guide
Prestigio Roadrunner 540
Quick Start Guide
Road Ranger C201
Note:
Press MODE button to lock current file during recording and the
locked file won’t be replace until a manual unlock.
7. Taking pictures
To take a picture make sure the Picture Mode is selected. Press the
Record button to take a photo. Taken photos are saved on SD Card.
To zoom in/out press the navigation button up/down.
8. Video Menu Settings
Turn on the device and make sure the Video mode is selected.
Note:
To select Video or Picture Mode press the Mode button. The appropriate
symbol will be displayed in the top right corner of the screen.
Press Menu button with 3 seconds to enter Settings. Press the
navigational button up/down to select the option and press Record
button to enter, and then press up/down to set the value, and then
press Record button to confirm the setting.
Press Menu button with 3 seconds to enter Settings. Press the
navigational button up/down to select which menu you want to set.
Press Menu button with 3 seconds again to exit from menu setting.
The following options list is available in the Video menu:
Movie Mode: Select the video image size from 1920x1080 (30 fps),
1280x720 (60 fps), 1280x720 (30 fps), 640x480 (30 fps).
Movie Quality: Select the video quality.
Movie Clip Time: Select one of the values to set the video duration.
Sound Record: Select to turn the microphone on or off.
MIC Sensitivity: Select the sensitive of the Mic.
Scene: Select the video mode (such as auto, sports, portrait,
landscape or beach etc).
Exposure: Select the exposure compensation (when the device fails
to identify the correct exposure automatically).
White Balance: Select the correct white balance according to the