polaroid 636 AF, OneStep AF, OneStep AF SE, 600 AF, 637 User guide

2

Taking Photos

Questions? Need Help?
Contact Polaroid Customer Care Center
Toll Free at: 1-800-343-5000
8am - 8 pm EST Mon - Fri

(USA only)

3

Lighten/Darken Control

1

Loading Film

This camera uses
Polaroid 600 series
film. Each pack of film
contains 10 photos.

Snap the camera shut
when not in use.

5

Flash Override Button

(Not on AF model cameras)

AF Model Cameras:

636 AF
OneStep AF
OneStep AF SE
600 AF

4

Close-up Lens

(Not on AF model cameras)

Non-AF Model Cameras:

637
OneStep
OneStep Express
600 Extreme
600 CL
Cool Cam
JobPro 2
600 Business Edition 2

1

Loading Film

Taking a Photo

2

a

a

Pull up the flash unit and
snap it into place.

a

a

Position your subject(s) 4-8 feet from the
camera (normal lens setting). Frame
your subject(s) in the viewfinder.

b

Open the film door.

b

c

Insert the film pack as
shown. Hold the film
pack by the edges. Push
the film pack in until a

c

"click" is heard.

b

4 ft – 2 – 4 ft

1.2m – .6 – 1.2m

4 ft –

1.2m –

b

Hold the camera still and
press the shutter button.

c

The photo automatically
ejects.

c

Lighten/Darken

d

Close the film door.

3

Control

d

e

The camera ejects
the paper film cover.

e

f

10

f

Check the picture
counter on the back of
the camera. The number
inside the window shows
you how many photos
are left in a film pack.

A new pack of film
contains 10 photos.

Use this feature to retake a photo that was too
light or too dark. Always return the control to
the normal position after using.

To lighten a photo that is too dark, slide the lighten/

darken control to the right. Retake the photo.

To darken a photo that is too light, slide the lighten/

darken control to the left. Retake the photo.