Page 1
Quick Installation Instructions
Software package includes:
CD
- Setup file (idcmimagecapturebasicgk.exe)
- User Guide (PDF)
USB software key
System requirements:
Windows® 2000 or XP
Free 20MB on hard disk for ID Card Maker Image Capture Basic software files
Two free USB 1.0 (or higher) ports
- USB software key
- Camera to PC connection
Note: Some new cameras need a USB 2.0 port; otherwise, the image transfer speed will be much slower.
Installing the ID Card Maker Image Capture Basic software
1. Insert the CD into the drive bay.
The software installation Wizard will launch.
Note: If the program does not auto run, click
OK
Then click
at the run dialog box.
Start>Run
2. After installing the ID Card Maker Image Capture Basic software, insert the USB key into the USB port of your computer.
Hardware Wizard
3.
The wizard will ask if you want to search for software, Select
4. Select
Install the software automatically
will start.
, and browse to the CD drive and select
No, not at this time.
and click Next.
idcmimagecapturebasicgk.exe
The Found New
. Click
Note: The Wizard will search for New Hardware installed (USB key). A dialog box appears stating that the Key has not passed Windows Logo
testing…
5. Select
Continue anyway
to continue the key driver installation.
Now you are ready to use ID Card Maker Image Capture Basic as a TWAIN driver with any program supporting TWAIN protocol.
Open
.
Complete Installation Instructions are in the User Guide located on the CD
2006, Polaroid and Polaroid & Pixel are trademarks of Polaroid Corporation
866-484-0611 http://www.polaroid-id.com
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
REV: 09-20-06
Loading...