How it Works
Polaroid
Loading...
FXM-1911C
User Manual
43 pgs1.25 Mb1

Polaroid FXM-1911C User Manual

19” HD-Ready LCD TV/DVD Combo
FXM-1911C
20060331
Table Of Contents
Connecting to External AV Signal Source------------------------------------12 Connecting to External AV Signal Source (YPbPr) ------------------------13 Connecting to External AV Device (AV Out) --------------------------------14 Connecting to PC ------------------------------------------------------------------15 Connecting to Earphone ---------------------------------------------------------16 Connecting to Power Adapter---------------------------------------------------16 Connecting to TV Antenna-------------------------------------------------------17
TV Setup and Operation--------------------------------------------------------18
Preparations-------------------------------------------------------------------------18 Image Setting-----------------------------------------------------------------------18 Audio Setting------------------------------------------------------------------------19 Sleep Setting------------------------------------------------------------------------20 Parental Setting---------------------------------------------------------------------21 Setup Setting------------------------------------------------------------------------24
DVD System Setup---------------------------------------------------------------27 DVD Playback Operation-------------------------------------------------------33 USB and SD/MS/MMC Card Function--------------------------------------38 Other Functions-------------------------------------------------------------------39
External A V Input Function-------------------------------------------------------39 Computer Screen Function------------------------------------------------------39
Troubleshooting------------------------------------------------------------------40 Specifications---------------------------------------------------------------------41
1
Important Safety Instructions
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
POWER SUPPLY: Connect the supplied adapter to the side of the DVD player in the slot marked “Power In”. Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it, if the unit will not be used for a long time, disconnect the plug from the outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections have been made.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: Laser radiation when open. Do not stare into beam.
- 2 -
q
Important Safety Instructions
Note:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Note: Do not touch the color TFT LCD screen by hand directly.
Copyright Protection
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit. Leave all servicing to
ualified service personnel.
- 3 -
Product Features
This product incorporates a DVD player , LCD display and TV receiver in one system.
Multiple Modes
DVD mode Component mode VGA mode TV mode COMPOSITE mode S-VIDEO mode
High Quality Property
High Resolution
Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines.
LCD (Liquid Crystal Display)
Designed with 19" color TFT liquid crystal display clearly shows the data.
Stereo amplifier
Built-in 2x5w speakers provide high quality sound.
AV and VGA Input
Can be connected to external audio and video signal source and PC.
Special Function
Supports sleep time setting, V-Chip and CCD function.
Multi-audio and Multi-video modes
Support multi-audio and multi-video modes, provide more selecting.
USB and CARD PORTS
Designed with USB and SD/MS/MMC card port, can be connected to USB device or SD/MS/MMC Card.
Auto TV Searching Function
Can be connected to the TV antenna, support Auto and manual TV programs searching function.
Advanced Playing Features
Compatibility
DVD, CD, CD-R, CD-RW and JPEG compatible.
Zoom Function
Enlarge the picture to enhance your enjoyment.
All Playback Functions
Fast forward and reverse, slow playback and repeat playback.
Special playback.
Support multi-angle, multi-language and multi-subtitle playback.
NOTE: It is normal for a TFT screen to
experience some light or dark spots appearing on the LCD screen.
- 4 -
Disc Information
Discs Formats Supported By This Player
DVD
DISC LOGO CONTENTS SIZE MAXIMUM TIME
Audio+Video
(active picture)
12cm
133min(SS-SL) 242min(SS-DL) 266min(DS-SL) 484min(DS-DL)
CD
JPEG Still high resolution 12cm
z The operating method of some DVD discs is specified by the software maker. Please refer to
the instruction manual of the disc.
z The DVD Player will play most recordable (CD-R) or erasable (CD-RW) CDs, but playback of
CD-R or CD-RW discs created on a computer requires proper formatting and finalization of the disc for audio playback. Some computers and/or software programs may not be capable of creating compatible discs.
Audio 12cm 74min
About Disc Terms
Title
Generally, pictures or music compressed on a DVD are divided into several sections, “title”.
Chapter
The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching. But some discs may not have a recording chapter.
Track
A segment of picture or mu sic on a CD. Each track is numbered for searching.
- 5 -
Front Panel
1. 19" color TFT screen
19" color TFT screen clearly show your images.
2. SOURCE button
Press to select the modes: DVD, Component, VGA, TV, COMPOSITE or S-VIDEO.
3. MENU button
Press to enter or exit setup menu.
4. CH
5. VOL
6. PLAY button
▲/▼ button
In the TV mode, press to select channels. In setup menu, the same function as
▲/▼ button
In the TV mode, press to decrease or increase the volume. In setup menu, the same function as ◄/► direction buttons. In setup menu, the VOL
Press to play the disc in DVD mode.
▲ has the same function as ENTER button.
▲/▼ direction buttons.
- 6 -
Front Panel (Continued)
7. ■ STOP button
Press to stop playback, then press the PLAY button to resume normal playback in DVD mode. Press the STOP button twice to stop playback completely.
8. Eject button
Press to eject the disc out.
9. Power button
Press to enter or exit the standby mode.
10. SD/MS/MMC Card Port
Insert the SD, MS or MMC card into the port.
11. Disc Tray Slot
Used to load disc into the unit.
12. Earphone Jack When connected to earphone, the internal speakers will automatically turn off.
13. USB Connecting Port
Connecting to the USB device.
14. Remote Sensor
Remote sensor window for the remote control.
15. Power Indicator
In normal playback status, it is blue; in standby mode, it turns red.
16. Speakers
Two speakers output high quality stereo sound.
- 7 -
Rear Panel
1. Y/Pb/Pr Input Jack (Component)
Connected to the Y/Pb/Pr input in Component mode.
2. L/R Audio Input Jack
Connected to the L/R audio input in Component mode.
3. AV Output Jacks
Connected to the external AV input device.
4. AV and S-Video Input Jacks
In the S-VIDEO mode, connected to S-VIDEO signal input. In the COMPOSITE mode, connected to the external video signal input. The L/R audio input jacks can be used in the both S-VIDEO and COMPOSITE
modes.
5. TV Signal Input Jack (RF)
Connected for the external NTSC TV signal input.
6. DC 12V In Jack
Connected to power adapter.
7. VGA Input Jack
Connected to the VGA output jack on a personal computer .
8. PC AUDIO Input Jack
Connected to the PC audio output jack.
- 8 -
Remote Control
Preparation of Remote Control
Softly push the back cover to open the battery compartment.
Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment.
Softly press the back cover to close it.
z Under normal use the battery will last for
six months.
z Take out battery when the remote is not in
use for a long time.
Using the Remote control
Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit.
• The operating distance may vary depending to the brightness around.
Notes:
• Do not point bright lights directly at the remote control sensor.
• Do not place objects between the remote control unit and the remote control sensor.
• Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment.
- 9 -
Remote Control
Basic Operation
1. POWER button
Press to enter or exit the standby mode.
2. 0~9 Number buttons
Press to select numbers.
3.
LAST button
In the TV mode, press to return to the
channel last viewed.
4. MTS button
Press to activate MTS function in TV mode.
5. VOL +/- button
Press to increase or decrease the volume.
6. CCD button
In the TV or COMPOSITE mode, press to display the closed captions or cancel display.
7. EXIT button
Press to exit the setup menu.
8. Direction buttons (▲▼◄►)
In the setup menu, press the ▲▼button to select the desired item and press the ◄► button to adjust or set.
9. ENTER button
Press to confirm your selection.
10. INFO button
Press to display the information about current status on the screen.
11. +10/
12. Aspect button
Press to select screen aspect ratio.
13. CH / button In TV mode, press to select channel.
14. MUTE button
15. SOURCE button
16. MENU button
Press to enter the LCD setup menu.
button
In DVD mode, press to select number greater than 10. In TV mode, when select the 1~99 channel, press this button to confirm and enter the selected channel.
Press to turn on or off the speaker output.
Press to select the mode DVD, Component, VGA, TV, COMPOSITE or S-VIDEO.
- 10 -
Remote Control
For DVD Operation
1. PLAY button
Press to play the disc in DVD mode.
2. PAUSE button
In DVD mode, press to pause the playback or start step-by-step playback. Then press the PLAY button to resume normal playback.
3. FB button
Press the FB to search backward in DVD mode.
4. FF buttons
Press the FF to search forward in DVD mode.
5. 0~9 Number buttons
Press to select numbers.
6. Direction buttons (▲▼◄►)
In the setup menu, press the ▲▼button to
select the desired item and press the ◄► button to adjust or set.
7. ENTER button
Press to confirm your selection.
8. TITLE button
When a DVD disc is playing, press to go to title menu if the disc contains.
9. MENU button (in DVD mode)
Press to enter the disc menu in DVD mode.
10. REPEAT button
Press to repeat a chapter, track, title or all content in DVD mode.
11. ANGLE button
Press to select various camera angles (if the DVD disc contains multiple camera angles).
12. A-B button Press to mark a segment to repeat between A and B during DVD disc playback.
13. AUDIO button
Press to select different audio languages during a multiple audio language DVD disc playback in DVD mode.
14. Eject button Press to eject the disc out.
15. STOP button Press to stop playback in DVD mode.
16. NEXT button
Press the NEXT to skip to the next chapter/track for some discs in DVD mode.
17.
PREV buttons
Press the PREV to skip to the previous chapter/track for some discs in DVD mode.
18. CARD button
Press to shift to USB or CARD mode when there is the input source.
19. SETUP button(in DVD mode)
Press to enter the DVD setup menu in DVD mode.
20. SLOW button
Press to active slow playback function in DVD mode.
21. ZOOM button
Press to zoom in or out the picture in DVD mode.
22. GOTO button
Press to access or exit the time-searching
mode under DVD mode.
23. SUBTITLE button
Press to select different subtitle
languages during a multiple language DVD disc playback in DVD mode.
- 11 -
System Connections
• Do not connect the power cord to the unit until all other connections have been made.
• Ensure that you ob serve the color cord when connecting audio and video cables.
Connecting to External AV Signal Source
Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source. Press the SOURCE button of the remote or the unit and select COMPOSITE or S-VIDEO as the input mode. Note: the L/R audio input jacks can be used in the both COMPOSITE and S-VIDEO modes.
- 12 -
Loading...
+ 30 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use