polaroid 636 AF, OneStep AF, OneStep AF SE, 600 AF, 637 User guide

Questions? Need Help?

Contact Polaroid Customer Care Center

Toll Free at: 1-800-343-5000

8am - 8 pm EST Mon - Fri (USA only)

3

2

Lighten/Darken Control Taking Photos

4

1

Loading Film

Close-up Lens

(Not on AF model cameras)

This camera uses Polaroid 600 series film. Each pack of film contains 10 photos.

Snap the camera shut when not in use.

5

Flash Override Button

(Not on AF model cameras)

AF Model Cameras:	Non-AF Model Cameras:
636 AF	637
OneStep AF	OneStep
OneStep AF SE	OneStep Express
600 AF	600 Extreme
	600 CL
	Cool Cam
	JobPro 2
	600 Business Edition 2

1 Loading Film

a

aPull up the flash unit and snap it into place.

b Open the film door.

b

c

cInsert the film pack as shown. Hold the film pack by the edges. Push the film pack in until a "click" is heard.

d Close the film door. d

e

eThe camera ejects the paper film cover.

10	f
f

Check the picture counter on the back of the camera. The number inside the window shows you how many photos are left in a film pack.

A new pack of film contains 10 photos.

2 Taking a Photo

a	4 ft –	2 – 4 ft
	1.2m –	.6 – 1.2m

4 ft –

1.2m –

aPosition your subject(s) 4-8 feet from the camera (normal lens setting). Frame your subject(s) in the viewfinder.

b

c

bHold the camera still and press the shutter button.

cThe photo automatically ejects.

3 Lighten/DarkenControl

Use this feature to retake a photo that was too light or too dark. Always return the control to the normal position after using.

To lighten a photo that is too dark, slide the lighten/ darken control to the right. Retake the photo.

To darken a photo that is too light, slide the lighten/ darken control to the left. Retake the photo.