
Camera features
page
2
Back Next
www.polaroid.com
mio
Film exit slot
Strap holes
Auto (no icon)
Fill flash ( )
Press once to lighten ( )
Press twice to darken ( )
Normal: 2.5 - 10 ft (no icon)
Distance: 10 ft to
∞
( )
Film door
lock
Film compartment
door
Lens setting button
Lighten/Darken button
Flash button
Power button
Flash/function
indicator light
Viewfinder
Battery door
Film status window
yellow bar indicates
film pack is in camera
Status/film count LCD
Film counter
Lighten photo on
Darken photo on
Fill flash on
Distance setting on
2 of 2

Back Next
page
3
www.polaroid.com
mio
Attach strap
1
Push small loop through strap holes.
2
Pull wide end of strap through small loop.
1 of 1

Back Next
page
4
www.polaroid.com
mio
Load batteries
This camera uses two 3V CR2 batteries.
CAUTION: DO NOT mix old or new batteries. DO NOT mix alkaline, standard
(carbon-zinc), or rechargeable (nickel-cadmium) batteries.
1
Open the battery compartment door.
2
Insert batteries as shown.
1 of 1

Back Next
page
5
www.polaroid.com
mio
Load film pack
1
Unlock and open the film compartment door.
2
Insert the film pack.
Hold the film pack by the edges. Do not press
on the center of the film pack. Insert the film
pack so that the yellow mark on the film pack
aligns with the corresponding mark inside the
film compartment.
Close the film compartment door.
1 of 2
Use with
Polaroid mio
instant film