Polar Y6 user guide

POLAR CADENCE SENSOR
POLAR SPEED SENSOR

Model:Y6

User Manual

1

ID:

ID:

A

2

A

B

ENGLISH

Polar Cadence Sensor is designed to measure
cadence, i.e. crank revolutions per minute,
when cycling. Polar Speed Sensor is designed to
measure speed and distance when cycling. The
sensors are compatible with Bluetooth®Smart
Ready devices that support Bluetooth®Cycling
Speed and Cadence Service.

You can use your sensors with dozens of leading
fitness apps as well as with Polar products
using Bluetooth®Smart. Check the compatible
products and devices at www.polar.com/support.

1

Register your Polar product at
http://register.polar.fi to ensure we can keep
improving our products and services to better
meet your needs.

The latest version of this user manual can be
downloaded at www.polar.com/support.

Please follow the pictures on the front and back
covers.

Write the device ID printed on each sensor in
the space on the front cover (picture 1). The
original marking may fade as a result of
normal wear and tear.

2 ENGLISH

Cadence Sensor Parts

1. Cadence sensor (pictures 2 A and 3 A)

2. Cadence magnet (picture 3 B)

Installing the Cadence Sensor

For a video tutorial, see Installing Polar
Cadence Sensor at
www.polar.com/en/polar_community/videos.

To install the cadence sensor and cadence
magnet, you need cutters.

1. Check the chain stay for a suitable place
for the cadence sensor (picture 2 A on the
front cover). Do not install the sensor on
the same side as the chain. The Polar logo
on the sensor should be facing away from
the crank (picture 3 A on the back cover).

2. Attach the rubber part to the sensor
(picture 1 on the front cover).

3. Clean and dry a suitable place for the
sensor and place the sensor on the chain
stay (picture 3 A on the back cover). If the
sensor touches the rotating crank, tilt the
sensor slightly away from the crank. Pass
the cable ties over the sensor and rubber
part. Do not tighten them fully yet.

ENGLISH 3