Polar IRDA USB 2.0 User Manual

Polar IrDA USB 2.0 Adapter and Bridge Driver
User Manual

1. General

Polar IrDA Adapter is designed for infrarred data transfer between Polar heart rate monitors and other
infrared products. No other use is intended or implied.

To use the Polar IrDA 2.0 Adapter and IrDA 2.0 Bridge Driver you need Windows® 98, Windows®
ME, Windows® 2000 or Windows® XP Operations System on your computer. Make sure you have also
updated to the latest Service Pack of Microsoft Windows®.

2. Driver Installation

We recommend you start by installing the USB 2.0 IrDA Bridge Driver.

The Driver installation will start automatically when you select OK.

However, if it does not, open the CD Driver IR721 and select Autorun. On Windows Operation System,
select folder WinDriver and setup.exe file.

The instructions from here on only work under Windows Operation System.

In automatic installation the following popup screen appears briefly indicating the installation has
started:

2. Driver Installation

Click Next to continue:

2. Driver Installation

To select a folder where setup will install files click Browse or to accept the suggested folder, click
Next:

2. Driver Installation

USB 2.0 IrDA Bridge Driver is being installed:

2. Driver Installation

If you are using the Windows XP Operating System, a warning sign will pop up indicating that the
software has not passed Windows Logo testing. Click Continue Anyway to proceed:

2. Driver Installation

Click Finish to complete USB 2.0 IrDA Bridge Driver installation:

2. Driver Installation

3. Hardware Installation

Plug in the Polar IRDA USB 2.0 Adapter to the USB port of your computer. You will either

a) see a few pop-up screens momentarily as the device is being recognized (no user intervention
required) OR