Polar CS200cad User Manual

Polar CS200

User Manual

™

CONTENTS

The information relevant to using the product with the cadence sensor is in blue text.

1. INTRODUCTION TO THE POLAR CYCLING COMPUTER ........................................................................................................7

1.1 PRODUCT ELEMENTS ...............................................................................................................................................7

1.2 USING YOUR CYCLING COMPUTER FOR THE FIRST TIME ...........................................................................................8

1.3 INSTALLING THE BIKE MOUNT, CYCLING COMPUTER, SPEED AND CADENCE SENSORS ...........................................12

1.3.1 Bike Mount and Cycling Computer..............................................................................................................12

1.3.2 Speed Sensor ..............................................................................................................................................13

1.3.3 Cadence Sensor ..........................................................................................................................................15

1.4 WEARING YOUR TRANSMITTER ............................................................................................................................... 17

2. EXERCISING .................................................................................................................................................................... 18

2.1 EXERCISE RECORDING AND HEART RATE MEASURING ...........................................................................................18

2.2 FUNCTIONS DURING EXERCISE ..............................................................................................................................20

2.3 STOPPING THE EXERCISE AND VIEWING SUMMARY FILE .........................................................................................25

3. VIEWING RECORDED INFORMATION - FILE .....................................................................................................................27

3.1 VIEWING EXERCISE FILE .........................................................................................................................................27

3.2 DELETING FILES ONE BY ONE ................................................................................................................................. 31

4. TOTAL VALUES ................................................................................................................................................................. 32

5. SETTINGS ........................................................................................................................................................................37

5.1 RIDING DISTANCE FOR ESTIMATED TIME OF ARRIVAL FUNCTION AND

AUTOMATIC LAP RECORDING SETTINGS (CYCLING SET) .........................................................................................37

5.2 TIMER SETTINGS (TIMER SET) ................................................................................................................................39

ENGLISH – 5

5.3 HEART RATE LIMITS SETTINGS (LIMITS SET) ........................................................................................................... 40

5.3.1 OwnZone .....................................................................................................................................................42

5.4 BICYCLE SETTINGS (BIKE SET) ............................................................................................................................... 45

5.5 WATCH SETTINGS (WATCH SET) ..............................................................................................................................49

5.6 PERSONAL INFORMATION SETTINGS (USER SET) ....................................................................................................51

5.7 CYCLING COMPUTER SOUNDS AND UNITS SETTINGS (GENERAL SET) .....................................................................54

6. CONNECT - DATA COMMUNICATION.................................................................................................................................55

6.1 EDIT SETTINGS WITH A COMPUTER .........................................................................................................................55

6.2 TRANSFER YOUR TRAINING DATA TO THE TRAINING DIARY ON THE WEB ................................................................56

7. CARE AND MAINTENANCE ................................................................................................................................................57

8. PRECAUTIONS ................................................................................................................................................................. 61

9. FREQUENTLY ASKED QUESTIONS .....................................................................................................................................63

10. TECHNICAL SPECIFICATIONS ..........................................................................................................................................65

11. LIMITED POLAR INTERNATIONAL GUARANTEE .................................................................................................................67

12. POLAR DISCLAIMER ........................................................................................................................................................ 68

13. INDEX ..............................................................................................................................................................................69

6 – ENGLISH

1. INTRODUCTION TO THE POLAR CYCLING COMPUTER

1.1 PRODUCT ELEMENTS

The Polar cycling computer package consists of the following parts:

Cycling Computer

The cycling computer displays and records your cycling and exercise data during exercise. Enter your personal settings into the cycling computer and analyze exercise information after workouts.

Polar Bike Mount™

Secure the bike mount to your bike and attach the cycling computer to it.

Polar Speed Sensor™

A wireless speed sensor measures speed and distance during cycling.

Polar Cadence Sensor™

CS200cad set includes a cadence sensor. The wireless cadence sensor measures the speed at which you turn the pedals of your bicycle. The information relevant to using the product with the cadence sensor is in a blue text.

CS200 set does not include a cadence sensor, but you can buy it as an accessory product.

Polar Web Services

www.polarpersonaltrainer.com is a complete web service tailored to support your training goals. Free registration gives you access to a personalized training program, training diary, useful articles, and much more. In addition, you can get the latest product tips and support online at www.polar.ﬁ .

The latest version of this user manual can be downloaded at www.polar.ﬁ /support.

Polar WearLink

The connector transmits your heart rate signal to the cycling computer. The electrode areas of the strap detect your heart rate.

+ transmitter

ENGLISH – 7

1.2 USING YOUR CYCLING COMPUTER FOR THE FIRST TIME

Enter your settings in the Basic Settings mode (time, date, units, and personal settings).

How to enter Basic Settings

Entering accurate personal information ensures that you receive correct feedback based on your performance (calorie consumption, OwnZone determination etc).

Activate the cycling computer by pressing the MIDDLE button. The display ﬁ lls with numbers and letters.

1. Press the MIDDLE button. BASIC SET is displayed.

2. Continue by pressing the MIDDLE button and follow the steps below:

The display reads: Press the RIGHT button to set the ﬂ ashing value Press the MIDDLE button to accept the value

3. Time Set

• Time Mode 24h / 12h

• AM / PM (for 12h format)

8 – ENGLISH

RIGHT

• Set 24h or 12h format.

RIGHT

• Set AM or PM.

MIDDLE

The display reads: Press the RIGHT button to set the ﬂ ashing value Press the MIDDLE button to accept the value

• Hours

• Minutes

RIGHT

• Set the hours.*

RIGHT

• Set the minutes.*

MIDDLE

4. Date Set**

• Day / Month

RIGHT

• Set the day (in 24h format) or

MIDDLE

the month (in 12h format).*

• Month / Day

RIGHT

• Set the month (in 24h format) or

MIDDLE

the day (in 12h format).*

• Year

RIGHT

MIDDLE

• Set the year.*

Note:

• *The numbers scroll faster if you press and hold the RIGHT button as you adjust the value.

• **The date will be displayed according to the time format selected (24h: day - month - year / 12h: month - day - year).

• After a change of battery or after you reset the cycling computer, you only need to set the time and date in the Basic Settings. You can skip the rest of the settings by pressing and holding the LEFT button.

ENGLISH – 9

The display reads: Press the RIGHT button to set the ﬂ ashing value Press the MIDDLE button to accept the value

5. Unit kg/cm or lb/ft

RIGHT

• Set the units for weight and height:

MIDDLE

kg/cm or lb/ft.

6. Weight kg/lb

RIGHT

• Set your weight in kilograms or pounds.

MIDDLE

Note: If you chose the wrong units, you can still change them by pressing the LEFT button and returning to step 5.

7. Height cm/ft

8. Birthday

• Day / Month

RIGHT

• Set your height in cm or ft.

• Set inches (if you chose lb/ft).

RIGHT

• Set the day (in 24h format) or

MIDDLE

the month (in 12h format).

• Month / Day

RIGHT

• Set the month (in 24h format) or

MIDDLE

the day (in 12h format).

• Year

RIGHT

MIDDLE

• Set the year.

10 – ENGLISH

The display reads: Press the RIGHT button to set the ﬂ ashing value Press the MIDDLE button to accept the value

9. Sex Male / Female

RIGHT

• Set male or female.

MIDDLE

• Settings done is displayed.

• To change your settings, press the LEFT button until you return to the desired setting.

• To accept the settings, press the MIDDLE button and the cycling computer goes to the Time mode.

The cycling computer goes to the power save mode (blank screen) by pressing the LEFT button or if you do not press any button in the Time mode for ﬁ ve minutes. You can turn the cycling computer on again by pressing any button.

ENGLISH – 11

1.3 INSTALLING THE BIKE MOUNT, CYCLING COMPUTER, SPEED AND CADENCE SENSORS

1.3.1 BIKE MOUNT AND CYCLING COMPUTER

1. You can install the bike mount and the cycling computer on the left or right side of the handlebar or on the stem with cable ties.

12 – ENGLISH

2. Place the rubber part on the handlebar or stem and insert the bike mount on top of it.

3. Pass the cable ties over the bike mount and adjust

them around the handlebar/

stem. Secure the bike mount ﬁ rmly. Cut off any excess cable tie ends.

4. Position the cycling computer on to the bike mount. Turn the cycling computer clockwise until you hear a click. You can release the cycling computer by pressing it down and simultaneously turning it counter clockwise.

1.3.2 SPEED SENSOR

To install the speed sensor and spoke magnet, you need cutters and a small screwdriver.

1. Attach the speed sensor to the opposite side of the front fork from the mounted cycling computer.

The speed sensor and the

cycling computer should be no more than 30-40 cm/ 1’-1’3’’ apart.

In case, the cycling computer is attached to the stem or if you are exercising in surroundings with electromagnetic interference, the distance should be minimized (minimum 30 cm/1’). The speed sensor and cycling computer should form approximately a 90° angle.

Should the distance between the cycling computer and the speed sensor be longer than recommended (for example on mountain bikes due to the front suspension), the speed sensor could be attached on the same side of the front fork as the cycling computer. In this case the maximum distance is 50 cm/1´6”.

2. Attach the rubber part to the sensor.

3. Pass the cable ties through the speed sensor and rubber part holes.

4. Adjust the sensor to the front

fork so that the POLAR logo faces outwards. Adjust the ties loosely. Do not tighten

them fully yet.

ENGLISH – 13

5. Attach the magnet to a spoke at the same level as the sensor. The magnet hole must be facing the speed

max 4 mm / 0’16”

sensor. Fasten the magnet to the spoke and tighten it loosely with a screwdriver. Do not tighten it fully yet.

Fine-tune the positioning of both the magnet and the speed sensor so that the magnet passes close to the sensor but does not touch it. Adjust the sensor towards the wheel/ spokes as much as possible. The gap between the sensor and the magnet should be under 4 mm/0’16’’. The gap is correct when you can ﬁ t a cable tie just about between the magnet and the sensor.

Rotate the front tyre so that you can see a speed reading on the display of your cycling computer. The reading indicates that the magnet and the speed sensor are positioned correctly. Once the magnet and the speed sensor are positioned correctly, tighten the screw to the magnet with a screwdriver. Also tighten the cable ties securely and cut off any excess cable tie ends.

14 – ENGLISH

Your safety is important to us. While riding your bike, please keep your eyes on the road to prevent any accidents and injury. Check that you can turn the handlebar normally and that the cable wires for brakes or gearing do not catch on the bike mount or the sensors. Check also that the bike mount or sensors does not hamper pedaling or the use of brakes or gearing.

Before you start cycling, you should set the wheel size of your bicycle into the cycling computer. For further information see pages 45-48.

1.3.3 CADENCE SENSOR

To install the cadence sensor and crank magnet, you need cutters.

max 80 cm / 2’6’’

2 A.

2 B.

1. Check the down tube to ﬁ nd a suitable place for the cadence sensor. The sensor should be attached at a maximum of 80 cm/ 2’6” from the mounted cycling computer. If needed the sensor can also be attached to the seat tube.

2. Place the rubber part on to the cadence sensor (A) and pass the cable ties through the cadence sensor and rubber part holes (B).

3. Clean and dry a suitable

place for the sensor and adjust the sensor to the down tube. If the sensor touches the crank (when

rotating), change the sensor’s position slightly upwards. Loosely adjust the cable ties. Do not tighten them fully yet.

4. The crank magnet should be

installed vertically on the

inner side of the crank.

Before attaching the magnet

to the crank, the area should

be cleaned and dried thoroughly. Attach the magnet to the crank and secure with the tape.

ENGLISH – 15

max 4 mm /

0’16’’

5. Fine-tune the positioning of both the crank magnet and the sensor so that the magnet passes close to the sensor without actually touching it.

The maximum distance between the cadence sensor and the crank magnet should be 4 mm/0’16”. The gap is correct when you can ﬁ t a cable tie just about between the magnet and the sensor. It is important that the lower corner of the sensor must face the magnet when rotating, also when the sensor has been attached to the seat tube. The lower corner of the sensor is shown with an arrow in the picture. Once the crank magnet and the sensor are positioned correctly, tighten the cable ties securely and cut off any excess cable tie ends.

16 – ENGLISH

Before you start cycling, you should set the wheel size of your bicycle into the cycling computer and turn the cadence function on. For further information see pages 45-48.

1.4 WEARING YOUR TRANSMITTER

Coded heart rate transmission reduces interference from other heart rate monitors that are close by. To make sure that the code search is successful and to ensure trouble-free heart rate monitoring, keep the cycling computer within 1 meter/ 3 feet of your transmitter. Check that you are not near other people with heart rate monitors or any source of electromagnetic disturbance. For further information on interference, see Precautions on page 61.

To measure your heart rate, you need to wear the transmitter.

1. Wet the electrode areas of the strap under running water.

2. Attach the connector to the strap. Adjust the strap to ﬁ t tightly but comfortably.

3. Tie the strap around your chest, just below the chest muscles, and attach the hook to

the other end of the strap.

4. Check that the wet electrode areas are ﬁ rmly against your skin and that the Polar logo of the connector is in a central and upright position.

Note: Detach the connector from the strap after every use, to maximize the transmitter battery lifetime. Sweat and moisture may keep the electrodes wet and the transmitter

activated. This will reduce the transmitter battery life.

See detailed washing instructions in Care and Maintenance chapter.

See the following chapter for how to start measuring your heart rate.

ENGLISH – 17

2. EXERCISING

2.1 EXERCISE RECORDING AND HEART RATE MEASURING

You can record seven Exercise Files. There are two ways to start exercise recording. If you turn on the AutoStart function, the cycling computer automatically starts and stops exercise recording when you start and stop cycling. If the AutoStart function is off, you can start exercise recording by pressing the MIDDLE button. For further information on AutoStart and how to set the function on/off, see pages 45-46.

1. Wear the transmitter as described in the section “Wearing your Transmitter” on page 17. Attach the bike mount, speed and

cadence sensors on your bicycle according to the instructions on pages 12-16.

2. Activate your blank cycling computer by pressing the MIDDLE button and start from the Time mode. The cycling computer

will automatically read your heart rate. Wait until the computer detects your heart rate and the framed, ﬂ ashing heart symbol appears on the display in 15 seconds.* Exercise time is not recorded yet.

3. Set your cycling computer on the bike mount.

• If you have turned AutoStart on, your heart rate value and speed appear on the display when you start cycling.

• If you have turned AutoStart off, you can start exercise recording by pressing the MIDDLE button when your heart rate

value and speed appear on the display. Your exercise time also starts running.

4. • If you have turned AutoStart on, the cycling computer automatically stops exercise recording when you stop cycling.

• If AutoStart is off, you can stop the exercise by pressing the LEFT button twice. For further information on Stopping the

exercise, see page 25.

18 – ENGLISH

• If your heart rate is not displayed and 00 appears on the display, the heart rate detection has stopped. Bring the cycling computer near the Polar logo on the transmitter to restart the heart rate detection. No button press is needed.

• If OwnZone® is selected, the OwnZone determination procedure begins when exercise recording starts. For further information, see the section OwnZone on page 42.

• To skip the OwnZone determination and use the previously determined OwnZone, press the MIDDLE button when OwnZone symbol appears on the display. If you have not determined your OwnZone before, your age-based heart rate limits will be used.

Note: * A frame around the heart rate symbol indicates a coded heart rate transmission.

• If the cycling computer does not display your heart rate, make sure that the transmitter electrodes are moist and that the strap is snug enough.

ENGLISH – 19

2.2 FUNCTIONS DURING EXERCISE

Note: Your exercise information is saved only if the stopwatch, i.e. your exercise duration, has been running for more than one minute or at least one lap has been stored.

Changing the display information: Press the RIGHT button to view the following options during exercise:

Speed and heart rate are also displayed graphically. The more bars are displayed, the higher your heart rate or speed and vice versa. One speed bar represents 5 km/h or 3 mph, and when all ten bars are displayed your speed is 50 km/h or 30 mph or higher.

Note: You can also press and hold the RIGHT button to set the computer to browse the views automatically. Scrolling can be turned off by pressing and holding the RIGHT button.

20 – ENGLISH

Ridden distance alternates with trip distance when you have taken at least one lap time.

Trip distance is reset to zero each time you take a lap time by pressing the MIDDLE

button.

Riding speed (km/h or m/h)

Cadence, i.e., your pedaling speed

Heart rate. If there is no heart rate reading or you have not set your user information,

the speed is displayed instead.

Average speed rise or drop indicator.

Cadence

Heart rate

The kilocalories you have burned so far.

The cumulation of kilocalories starts as your heart rate is displayed. If there is no heart rate

reading or you have not set your user information, the speed is displayed instead of calorie information.

Stopwatch, i.e., exercise duration.

Cadence

Heart rate

4. The estimated time of arrival, or if the riding distance function is off, the speed is displayed

instead. If you set the distance you are going to ride, the cycling computer estimates your arrival time to the destination according to your riding speed. For further information, see page 37.

Time of day

Cadence

Heart rate

ENGLISH – 21

22 – ENGLISH

Heart rate limits: On the left, you can see your lower heart rate limit and on the right your upper

heart rate limit. The heart rate symbol moves left or right according to your heart rate. If the heart symbol is not visible, it means your heart rate is either below the ﬂ ashing lower heart rate limit or above the ﬂ ashing upper heart rate limit. In this case an alarm goes on, provided the sounds are turned on. If there is no heart rate reading, the limits are not displayed. For further information, see page 40.

Time you have exercised in target zone, i.e., within the heart rate limits.

Cadence

Heart rate

Average heart rate and average heart rate rise or drop indicator during last minute.

Current rate of kilocalories burned (kcal/h) alternates with your cycling intensity (kcal/km or

kcal/m). If there is no heart rate reading or you have not set your user information, the speed is displayed instead of calorie information.

Cadence

Heart rate

Target Zone Alarm: With the Target Zone Alarm you can make sure you exercise at the right intensity. When the target zone

heart rate limits are activated, the cycling computer sounds an alarm if you are above or below your heart rate limits. You can set the limits for your target zone in the Settings/Limits SET menu. For further information, see page 40. If you are out of your target zone, the heart rate value starts ﬂ ashing and the cycling computer beeps with each heartbeat.

The symbol in the upper right corner of the display indicates that the Target Zone Alarm sound is activated. Note that the button sounds can also be set on/off in the Settings mode. To turning the sounds on or off, see page 54.

Note: When heart rate limits are not activated, no Target Zone Alarm in the exercise recording will sound, nor will target zone information be placed in the Summary File or File.

Storing Lap and Split Time: Press the MIDDLE button to store lap and split time. Lap time indicates elapsed time for one lap. Split time is elapsed time from the beginning of the exercise until storing a lap

time (for example from the beginning of the exercise until the 4th lap was stored).

Lap time

Number of the lap

Split time

Average heart rate calculated from the beginning of the lap.

Note:

• If you have activated the Automatic Lap function in the Settings mode, your cycling computer automatically records laps when you reach

the set distance, e.g., every kilometer or mile. For further information, see page 37.

• You can store up to 50 lap times. When the lap memory is full, LapTime FULL text will be displayed. You can take lap times during your

exercise, but they are no longer recorded.

ENGLISH – 23

Timers: The timers of your cycling computer work during your exercise recording. The cycling computer beeps and shows

when the timer time matches. If only timer 1 is on, the same timer beeps always after the set time has elapsed during your exercise. If timer 2 is also on, the timers alternate during your exercise. For further information, see page 39.

Pausing Exercise:

1. Press the LEFT button. Exercise recording, stopwatch, and other calculations are paused.

2. To continue, press the MIDDLE button.

Exercising in the dark: If you activate the backlight by pressing and holding the MIDDLE button during an exercise recording, the backlight will reactivate automatically during the same exercise every time you press any button.

Note: If the maximum ﬁ le recording time (99 hours 59 min 59 s) is exceeded, the cycling computer beeps, pauses recording and displays HALT. Stop recording by pressing the LEFT button. For further information on how to release memory for new ﬁ les by deleting ﬁ les, see page 31.

24 – ENGLISH

+ 46 hidden pages