Pocketbook Pro 612 Instruction
Firmware Update Manual
PRO SERIES FIRMWARE VERSION: 2.1.2
1. Download the Firmware to your PC
2. Unpack the content of the archive and copy it to the root folder of MicroSD-Card (recommended)
or internal Device storage
3. Switch off PocketBook Pro by pressing button On/Off
4. Switch on PocketBook Pro by pressing On/Off
5. During boot press and hold both Backward and Forward buttons simultaneously until the message
Firmware update… is displayed on the screen
6. Follow the on-screen instructions
7. Wait for the message on the screen: Please connect power cable, and then connect USB cable to
PocketBook Pro
Wait until you Press central Key… on the screen and press OK button
NOTE You can check your current Firmware version in Main menu > Conguration > About device
NOTE If the rmware le is located in the Device’s root folder, it will have a higher priority in comparison with the le
stored on the SD card during the update process.
Troubleshooting
Error Message Possible Reason Correction Method
Try to format your Micro SD card
le SWUPDATE.BIN cannot be
No upgrade image found
Upgrade image is corrupted or
Image is empty
File read error Incorrect Micro SD card Try to use another MicroSD card
Error. A different rmware version
is installed on the device
found on the Micro SD card.
Make sure the le is in the root
folder of the card.
SWUPDATE.BIN le is damaged
or there is no space available on
the Micro SD card.
A rmware le of an older
version is stored in the device
internal memory.
(make a backup copies of all its
content prior to formatting) and
copy the le to the root of the
empty card. If this error persists,
use another card.
Delete some les from your
card and copy SWUPDATE.
BIN le on it one more time.
Repeat the download from www.
pocketbook-int.com. If this error
repeats, use other card.
Delete the old version of the
rmware le from the Device’s
internal memory root folder
Loading...