Plantronics W82XXT, W8200B Users Manual

QUICK START

I 8210 / 8220

SAV

Designed in Santa Cruz, California

BACK

plantronics.com/setup/saviw82xx

Lapt

op PC as reference only,

may use desktop PC as well.

1 HOOK UP YOUR SYSTEM

Using the illustration, connect your headset system.

2 CHARGE YOUR HEADSET

Charge your headset for a minimum of 20 minutes by placing it in the base. The cradle LED ﬂashes green when charging.

3 PAIR YOUR HEADSET

1 Press and hold the Bluetooth pairing button on the base

until the Bluetooth LED ﬂashes red and blue.

2 Go to Bluetooth settings on your mobile phone and

select SAVI 7xx. Once successfully paired, the Bluetooth LED on the base turns solid blue.

4 DOWNLOAD SOFTWARE

Plantronics Hub software is required for softphone call control. It also provides you with an easy way to change device and software settings and install software and ﬁrmware updates

Download Plantronics Hub for Windows or Mac at plantronics.com/software.

HOW TO

On the top of the base there are three Audio buttons: computer, mobile, desk phone. These buttons allow you to switch to a different phone line/audio channel.

Make a call

1 Tap the Audio button on the base ( ).

2 Deskphone only: Manually remove the handset if you

don’t have an HL10 lifter or EHS cable. You should hear a dial tone.

3 DESK PHONE TIP If you do not hear a dial tone, open the base

side panel and adjust the middle switch (A--G). “A” works for the majority of desk phones.

4 Dial from your softphone/mobile phone/desk phone.

End/Take a call

Tap the Audio button on the base or tap the headset call button.

CALL CONTROL TIP Headset call control for the computer

requires Plantronics software and softphone compatibility. See “Download software.”

ANC

© 2017 Plantronics, Inc. Plantronics are trademarks of Plantronics, Inc. registered in the US other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. Patents pending. XXXXXX-XX 00.00 Savi 8210 / 8220 has a W8200B (may be followed by /A or /S) base and a W8210T/W8220T (may be followed by /A or /S) headset.