Plantronics W710A, W720A User Manual
Headset
Desk phone
Mobile
Computer
Savi® W710
Savi® W710A
Multi Device Wireless
Savi® W720A
Headset System
Multi-Device Wireless
Headset System
Guide de démarrage rapide
Guía de inicio rápido
LYNSTART
Guia de Início Rápido
Kurzanleitung
Guía de inicio rápido
QUICK START GUIDE
1
1
2
3
Customise and charge
Attach charging cradle to base.
Plug one end of power supply into power jack on back of the base and
other end into working power outlet.
To charge, dock headset in base, minimum of 20 minutes.
2
1 Choose desk phone setup A, B or C and connect cables.
Connect and call
A Desk phone (standard)
USE
B Desk phone + HL10 lifter (sold separately)
See user guide at plantronics.com/accessories
USE
C Desk phone + EHS cable (sold separately)
See user guide at plantronics.com/accessories
3
1
2 Place Bluetooth mobile phone into search mode. Select SAVI 7xx from
3 If prompted by mobile phone, type 0000 as passcode.
Connect and call
Press down and hold Bluetooth pairing button (4 seconds) on Savi
base until indicator LED flashes red and blue.
the list of found devices.
Bluetooth indicator LED on base will turn solid blue when base has an
active connection with mobile phone.
4
1
2
3
4
5
Connect and call
Connect USB cable.
Load Plantronics software by visiting plantronics.com/software and
click on download button.
While wearing headset, short press base computer button.
Dial test call from computer softphone.
End call by pressing headset call control button.
plantronics.com/software
QUICK START GUIDE
VIDEO GUIDE
http://docs.plantronics.com/savi-700
VIDEO GUIDE
http://docs.plantronics.com/savi-700
1
Decrease volume Short press –
2
Answer/end call Short press
USE
While wearing headset, short press base desk phone button.
2
NOTE If you don’t have remote call control through a lifter (HL10) or
REMARQUE If you don't have remote call control through a lifter (HL10)
cable (EHS), manually remove desk phone handset before each call.
or cable (EHS), manually remove desk phone handset before each call.
If you do not hear a dial tone, open side panel and adjust middle
3
configuration switch (A–G) until you do. Default setting A works for
majority of desk phones.
While wearing headset, short press base mobile button.
4
Dial test call from mobile phone.
5
End call by pressing headset call control button.
6
3
Mute Short press
4
Increase volume Short press +
5
Flash While on call, long press volume up + or volume down –
for 1.5 seconds, will put call on hold and answer another.
WARNINGS For your safety, do not use headset at high volumes
for extended periods of time. Doing so can cause hearing loss.
Always listen at moderate levels. For more information on
headsets and hearing, visit plantronics.com/healthandsafety.
Please refer to the separate safety instructions for important product
safety information prior to installation or use of the product.
Savi W710A/W720A has a WO2A base and a WH300A/
Savi W710/W720 has a WO2 base and a WH300/WH350
WH350A headset. 86106-02 (04.11)
headset.
Dial test call from desk phone.
4
End call by pressing headset call control button.
5
NEED MORE HELP?
Technical support
plantronics.com/support
Online user guide
http://docs.plantronics.com/savi-700
NEED MORE HELP?
Product support
plantronics.com/support
Online user guide
http://docs.plantronics.com/savi-700
Loading...