4 Easy Steps
The fastest way to setup your
CS55™ Headset System
Base Power
Adapter
HL10
Automatic
Handset Lifter*
CS55
Headset Base
CS55 Headset
with Earloop
*Not included in all con gurations
CS55 Series SETUP GUIDE
CS55 PACKAGE CONTENTS
4 Easy Steps
The fastest way to setup your
CS55 Headset System
Base Power
Adapter
HL10
Automatic
Handset Lifter*
CS55 Headset
with Ear Loop
CS55
Headset Base
CS55Series SETUP GUIDE
Setup Guide
Headset
Headset Base with Preinstalled Phone Cable
Base Power Adapter
Headband
Ear Loops
Please refer to the separate Safety Instructions for important product safety
information prior to installation or use of the product.
CS55 With Automatic Handset Lifter* Adds:
HL10 Automatic
Handset Lifter
*Automatic Handset Lifter is bundled with certain CS55 con gurations and also available separately.
HL10
User Guide
HL10 Additional Parts Kit (if needed)
Extender
Arm
Plantronics CS55 Setup Guide
2
Ringer
Microphone
Adapter for
Nortel i2004
Phones
1
STEP
ATTACH HEADBAND OR EARLOOP TO HEADSET
& ADJUST FIT
Snap the speaker of the headset into the retaining ring of the headband or one of the three
ear loops provided. See below.
Speaker
Ear Loop
Headband
If you will be wearing the headband, adjust the band for the most comfortable t.
See 1 below.
2
1
1
Headset
For either wearing option, rotate the headset in the retaining ring until the microphone is
pointed toward your mouth. See 2 above.
Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538
3
2
STEP
CONNECT BASE TO DESK PHONE
Use Con guration A if:
You will use the Automatic Handset Lifter
or…
Your phone has NO built-in headset functionality (no Headset button).
Con guration A
1. Unplug the handset coil
cord from the desk phone
handset port [A], then plug it
into the
port [B] on the Headset Base.
A
GREEN labeled handset
Handset
Coil Cord
A
2. Plug the short BLACK Phone Cable that
is pre-installed on the Headset Base into
the now-open handset port [ A] on the
desk phone.
Handset
Headset Base
(bottom view)
B
Plantronics CS55 Setup Guide
4
Use Con guration B if:
You will NOT use the Automatic Handset Lifter
and…
Your phone has built-in headset functionality (a Headset button).
Con guration B
Con rm there is
a “HEADSET” button
on your phone
C
1. Plug the short BLACK Phone
Cable that is pre-installed
on the Headset Base into
the Headset port [C] on
the desk phone.
Headset Base
(bottom view)
HANDSET port or HEADSET port?
You should only use the headset port if you will NOT be using the Automatic Handset
Lifter
AND you have a pre-programmed Headset button on your phone.
In this con guration you
and the Call Control Button on the headset to answer/end calls.
MUST press both the Headset button on your phone
Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538
5