Thank you for purchasing the Plantronics Discovery® 925 earpiece.
This guide contains instructions for setting up and using
your new earpiece.
Please refer to the Safety Information in this booklet for important
product safety information prior to use of the product.
Getting Assistance
The Plantronics Technical Assistance Center is ready to assist you.
You can find answers to frequently asked questions, ask a question
using e-mail, receive service over the Internet, or speak directly
with a representative. Visit www.plantronics.com/support or call
1-866-363-BLUE (2583).
NOTE If you are considering returning this earpiece, please contact
the Technical Assistance Center first.
Registering Your Product
Visit www.plantronics.com/productregistration to register your product
online so we can provide you with the best service and technical support.
NOTE For pairing your Earpiece, your PIN code, or “Passkey,” is 0000.
iii
EN
Contents
Package Contents, Features and Accessories ......................................iv
Charging Your Earpiece ........................................................................ 1
Using the AC or USB charger ...................................................... 1
Using the Charging Case .............................................................2
Checking the Battery Level .......................................................... 2
Recharging the Charging Case .................................................... 3
Pairing Your Earpiece ............................................................................ 4
* Not included. To order, please contact your Plantronics supplier or go
to www.plantronics.com
iv
USB Lanyard
#74948-01
1
EN
Charging Your Earpiece
Your new earpiece performs best when fully charged. While your
earpiece is charging, the indicator light slowly flashes red. When your
earpiece is fully charged, the indicator light turns off. This applies to
all charging options.
1
CHARGING TIME
3 hours ..... Full charge using
AC or USB
1 hour ....... Minimum charge
before first use
Option A: Using the AC Charger
1 Plug the AC charger into a power outlet.
2 Connect the AC charger to the charging jack on the earpiece.
Option B: Using the USB Charger
1 Connect USB charger to the USB
port on a computer or laptop.
2 Connect the USB charger to the
charging jack on the earpiece.
3 Turn the computer or laptop on.
2
3
1
2
WARNING Do not use your earpiece while it is
connected to the charger.
2
Charging Your Earpiece
CHARGING TIME
3 hours ..... Full charge using
charging case
1 hour ....... Minimum charge
before first use
Option C: Using the Charging Case
Open the cover of the case. Align the charging jack on the earpiece with
the micro USB connection in the case. Gently push the earpiece onto
the micro USB connection until you feel it click into place.
IMPORTANT Incorrect removal of the earpiece from the case will
damage the micro USB port in the case. To properly remove the
earpiece, use your thumb to gently push the earpiece in a diagonal,
not vertical, direction away from the micro USB connector.
Checking the Battery Level of Your Earpiece
Call Control Button
Volume Button
CHARGE INDICATOR LIGHTS
Red FlashesBattery Level
1Full battery
21/3 to 2/3 full
3Less than 1/3 full
With the earpiece on, simultaneously press and hold the call control
button and the volume button for about 2 seconds. The indicator light
flashes red to show the charge level.
3
EN
Charging Your Earpiece
1
Indicator Light
Charging Jack
The charging case provides one full charge to your earpiece before the
battery within the case requires charging. While the case is charging,
the indicator light on the bottom of the case flashes red. When fully
charged, the indicator turns off.
Recharging the Charging Case
2
CHARGING TIME
9 hours .... Full charge
using USB
3 hours .... Full charge
using AC
1 To check the battery status of the charging case, you must
connect the earpiece to the case.
If the earpiece does not begin charging mode (indicator light slowly
flashes red) then both the earpiece and case need recharging.
2 Plug either the AC charger or the USB charger to power
source before connecting to the charging jack on the bottom
of the case.
If you disconnect the power source from the case after 10 minutes of
charging you must then wait at least 60 minutes before reconnecting
a power source to resume the charging cycle.
NOTE If recharging with the AC charger, the charging case will feel
warm to the touch during the charging cycle. Once fully charged, the
case will cool down. See “Safety Information” on page 16 for more
information.
4
Pairing Your Earpiece
Pairing is the process of introducing your earpiece to your phone.
Before using your earpiece for the first time, you must pair it with
your Bluetooth® wireless technology enabled phone. Normally you
need to pair your earpiece with your phone only once.
To see a demo of the pairing process, visit www.plantronics.com/
EasyToPair.
Plantronics QuickPair™ Technology
Your new earpiece includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The first time you turn your earpiece on,
your earpiece automatically enters pairing mode for 10 minutes. Once
paired successfully, your earpiece stays on for instant use.
If not successfully paired after 10 minutes, your earpiece automatically
powers off. When you turn the earpiece on again, it automatically goes
into pairing mode until successfully paired with a Bluetooth phone.
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.