Contents
Headset overview 3
Be safe 3
Connect and pair 4
Connect to PC 4
Configure for media 4
Pair to mobile device 4
USB Bluetooth adapter 5
Pair USB adapter again 5
Load software 6
Charge 7
Check headset battery status 7
Fit 8
Replace eartips 8
The Basics 9
Power on/off 9
Adjust the volume 9
Play or pause audio 9
Track selection 9
Fast forward/rewind 9
Voice control 9
Make/Take/End Calls 9
More Features 11
Select language 11
Noise canceling 11
Online indicator 11
Change headset settings 12
DeepSleep mode 12
Caller Announcement (mobile phone only) 12
Update
firmware 13
Headset recovery 13
Troubleshooting 14
Support 15
2
RL
ANC
voice
00:02
2x1x 3x
Headset overview
LEDs
Mute
Be safe
ANC Active Noise Canceling
Power
Play/pause*
Next track*
Previous track*
Bluetooth® pairing
Volume
Call
Voice control: Siri, Google Now™, Cortana
NOTE *Functionality varies by application. May not function with web-based apps.
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
3
Connect and pair
Connect to PC
Configure for media
Your Bluetooth USB adapter comes pre-paired to your headset.
1 Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
2 The USB adapter LED flashes blue and then turns solid blue to indicate the headset is connected to
the USB adapter. If you are wearing your headset you will hear “PC connected” to indicate the
connection has been established. When on a call, the LED on the USB adapter will flash blue.
When not on a call the LED will be solid blue.
3 OPTIONAL Load Plantronics Hub for Windows and Mac by visiting plantronics.com/software. This
will allow you to customize your headset behavior through advanced settings and options.
Your USB Bluetooth adapter comes ready to take calls, but listening to music takes some
additional configuration.
Windows
1 To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound
> Playback tab. Select Plantronics BT600, set it as the Default Device and click OK.
2 To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >
Communications tab and select the desired parameter.
Mac
1 To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On
both the Input and Output tabs, select Plantronics BT600.
Pair to mobile device
1 To put your headset in pair mode, slide and hold the Power
until you hear "pairing" and the headset LEDs flash red and blue.
2 Activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*
switch away from the off position
NOTE *Menus may vary by device.
3
Select “PLT V6200 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.
NOTE To enable caller name announcement, allow access to your contacts if your phone prompts
you.
NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously;
this includes the Bluetooth USB adapter.
4
USB Bluetooth adapter
USB LEDs What they mean
Red and blue flashes Pairing
Solid Blue Pairing successful; Connected
Blue flashes On a call
Solid red Mute active
Purple flashes Streaming music/media from computer
Pair USB adapter again
1 Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your
computer to recognize it.
2 Put your headphones in pair mode.
3 Put your Bluetooth USB adapter into pair mode by gently pressing and holding the pair button
with a pen or paperclip until the Bluetooth USB adapter flashes red and blue.
Pairing is successful when you hear "pairing successful" and the Bluetooth USB adapter LED is
solid blue.
5