Planet WGSD-910 Datasheet
WGSD-910
Cost-effective Desktop Size / Fiber Capability / Group Managed
Switch
The PLA NET WGSD-910 is a Desktop size L2 Managed Fast Etherne t
Switch. It provides 8 10/100Mbps Fast Ethernet ports and 1 Gigabit TP/SFP
interface. The Compact-size design not only makes the Desktop Switch
fit into space-limited environment but also is mountable in a 19-inch rack
with attached rack-mounting kits. The equipped Gigabit SFP slot makes
it with capability of fi ber link for distance extending and can handle
extremely large amounts of data in a secured topology which is linked to a
backbone or high capacity servers.
The various support of QoS mode and VLAN features make the WGSD-910
meet the needs of effective data traffic control for SOHOs, SMBs and
Enterprises, such as VoIP, video streaming and multicast applications. The
key features are shown as below:
• IP Stacking up to 8 units • 802.1Q VLAN
• Rapid Spanning Tree • SNMP / SNMP Trap
• IGMP Snooping • SFP slots, Fiber link capability
Enhanced Layer 2 Features
The WGSD- 91 0 can be progr ammed for basic switch management
functions, such as per port speed configuration, Port Trunking, VLAN,
Rapid Spanning Tree, QoS, bandwidth control and IGMP Snooping. The
WGSD-910 provides Port-based VLAN, 802.1Q Tagged VLAN. And the
VLAN groups allowed on the WGSD-910 will be maximally up to 255. Via
supporting port trunking, the WGSD-910 offers the operation of a high-
speed trunk combining multiple ports. It also provides four groups of up to
8 ports for trunking and supports fail-over as well.
Efficient Management – Stacking Management
For efficient manage ment, th e WGSD-9 10 is equipped with console
interface, Web interface and SNMP agent. With its built-in Web-based
management, the PLANET WGSD-910 offers an easy-to-use, platform-
independent management and configuration facility. It supports standard
Simple Network Management Protocol (SNMP) and can be managed via
any standard-based management software. For text-based management,
the WGSD-910 can also be accessed via Telnet and the console port.
One of the management features of WGSD-910 is the IP Stacking function
support. It helps network managers to easily configure up to 8 switches in
the same series via one single IP address instead of connecting and setting
each unit one by one.
Data Sheet
1
Key Features
PHYSICAL PORT
8-Port 10/100Base-TX RJ-45
1-PORT GIGABIT TP/SFP COMBO INTERFACE LAYER 2
FEATURES
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE
802.3z Gigabit Ethernet standard
Auto-negotiation and half duplex/full duplex modes for all
10Base-T/100Base-TX and 1000Base-T ports.
High performance of Store–and-Forward architecture, broadcast
storm control and runt/CRC filtering eliminate erroneous packets
to optimize the network bandwidth
IEEE 802.1Q Tagged based VLAN and Port-based VLAN
Up to 4 Trunk groups, each trunk can be up to maximum 8 port
with 1.6Gbps bandwidth(Duplex Mode)
IEEE 802.1d, IEEE 802.1w, classic Spanning Tree Algorithm or
Rapid Spanning Tree support
QUALITY OF SERVICE
4 priority queues on all switch ports.
Strict priority and Weighted Round Robin (WRR) CoS policies
QoS and bandwidth control on each port
MULTICAST
IGMP Snooping v1 and v2
IGMP Port and Group policy
SECURITY
IEEE 802.1x Port-Based Authentication, RADIUS server
authentication or Local account authentication
MAC address Filtering and MAC address Binding
Port Mirroring to monitor the incoming or outgoing traffic on a
particular port
MANAGEMENT
WEB-based, Telnet, Console Command Line management
Access through SNMP v1 and v2c set and get requests.
Four groups (history, statistics, alarms, and events) of embedded
remote monitoring (RMON) agents for network monitoring and
traffic analysis
EMI standards comply with FCC, CE class
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8-Port 10/100Mbps + 1-Port Gigabit TP/SFP Combo
Managed Switch
WGSD-910
Data Sheet
2
Specification
Product 8-Port 10/100Mbps + 1-Port Gigabit TP/SFP Managed Ethernet Switch
Model WGSD-910
Hardware Specification
Copper Ports
8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
1 10/100/1000Base-T RJ-45 port
SFP/mini-GBIC Slots 1 SFP interface, shared with Port-9
Switch Architecture Store-and-Forward
Switch Fabric 3.6Gbps / non-blocking
Switch Throughput 2.67Mpps
Address Table 8K entries
Share Data Buffer 1Mbit
Maximum Frame Size 1522 Bytes packet
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
LED Power, Link/Act and speed per port
Console Interface One RS-232 DB-9 male connector for switch management
Dimensions 280 x 173 x 44mm (W x D x H), 1U height
Weight 1.24 kg
Layer 2 function
Management Interface Console, Telnet, Web Browser, SNMP v1 and v2c
Port Configuration
Port disable/enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable. Bandwidth control on each port.
Port Status Display each port speed duplex mode, link status, Flow control status. Auto-negotiation status
VLAN
Port-based VLAN, up to 9 VLAN groups
IEEE 802.1Q Tagged Based VLAN , 4K VLAN ID, up to 255 VLAN groups
Spanning Tree IEEE 802.1d, IEEE 802.1w
Link Aggregation Supports 4 groups of 8-Port trunk
QoS
4 priority queues.
Traffic classification based on Port Number, 802.1p priority, DS/TOS field in IP Packet
IGMP Snooping
v1 and v2
IGMP Port/Group Policy and Static Routing Port setting
Bandwidth Control
Per port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
Port Mirror Both
Security MAC filtering and Binding, up to 400 rules
SNMP MIBs
RFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-1493 Bridge MIB
RFC-2674 Extended Bridge MIB (Q-Bridge)
RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000Base-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
Network Media
10Base-T – UTP/STP category 3, 4 or 5 cable
100Base-TX – UTP/STP category 5 cable
1000Base-T – UTP/STP category 5e/6 cable
1000Base-SX – • 62.5/125μm multi-mode fiber optic cable, up to 220m
• 50/125μm multi-mode fiber optic cable, up to 550m
1000Base-LX – 9/125μm single-mode fiber optic cable, up to 120km (Vary on SFP Module)
Environment Specifications
Operating
Temperature: 0°C ~ 50 degree C
Relative Humidity: 20% ~90% (non-condensing)
Storage
Temperature: -40°C ~ 70 degree C
Relative Humidity: 20% ~ 90% (non-condensing)
Loading...